Troubleshooting - The remote has stopped working.
- Check that the batteries are fresh, are of the same type and are installed with the correct polarity (+ & -).
- Do not mix old and new batteries.
- Do not mix different battery types (such as alkaline and -manganese batteries).
- Do not use rechargeable (Ni-Cd) batteries.
- The remote control and the unit may be using different codes. If this is occuring you will see " Set 1 ", " Set 2 ", " Set 3 ", etc or " RC1 ", " RC2 ", " RC3 " displayed on the units display when buttons on the remote are pressed: To correct:
-
- Press any button on the remote and look at the recorder's display. A number will appear on the display.
- Press and hold the number that appeared and press the [ ENTER ] or [ OK ] button on the remote control simultaneously for 10 seconds. (e.g. If " Set 1 ", press [ 1 ] or If " RC2 ", press [ 2 ])
This answer is for the following models; DMR-EH75, DMR-ES30, DMR-ES35, DMR-ES40, DMR-EZ48, DMR-EZ485, DMR-EZ47, DMR-EZ475