No audio output from the secondary speaker - Technics Model SC-CX700

Cause:

• The power cord of the secondary speaker may not be connected properly.
• The wireless connection between the primary and secondary speakers might be interrupted.
• The pairing between the primary and secondary speakers may have been canceled.

Solution:

1. Check Power Connection:
   • Ensure the power cord of the secondary speaker is securely connected.
2. Reconnect the Wireless Connection:
   • Turn both speakers off and on to reconnect them wirelessly.
   • Alternatively, manually reconnect the speakers by pressing and holding the P/S CONNECT button on the primary speaker for 2 seconds. If the connection is not re-established, proceed to the next step.
3. Reset and Reconnect:
   • Unplug both power cords of the speakers.
   • Wait for more than 30 seconds, then reconnect the power cords.
   • Turn the speakers back on.
4. Check Pairing Status:
   • If the issue persists, the pairing between the primary and secondary speakers may have been canceled.
   • Refer to the Operating Manual (page 88) for detailed steps on how to re-establish the pairing between the speakers.