How to Connect External Equipment to the SC-BMAX5 & SC-BMAX10 Using an Optical Cable

The SC-BMAX5 and SC-BMAX10 speakers come with an OPT IN (Optical Input) that allows you to connect external audio sources such as a TV, DVD player, or gaming console for high-quality digital sound.

What You Need

• An optical digital audio cable (supplied with the unit)
• A compatible external device (TV, DVD player, gaming console, etc.)
• The SC-BMAX5 or SC-BMAX10 speaker system

Step-by-Step Instructions

Step 1: Connect the Optical Cable

• Locate the OPT OUT port on your external device (TV, DVD player, etc.).
• OPT OUT is sometimes labeled as DIGITAL OUT on certain devices.
• Plug one end of the optical cable into the OPT OUT (or DIGITAL OUT) port of your external device.
• Locate the OPT IN port on the back of your SC-BMAX5 or SC-BMAX10.
• Plug the other end of the optical cable into the OPT IN port on the speaker.

Step 2: Set the Audio Input on the Speaker

• Turn on the SC-BMAX5 or SC-BMAX10 unit.
• Press the [ INPUT SELECTOR ] button repeatedly until " OPT "" appears on the display.
• Ensure that the external device is playing audio.

Step 3: Adjust the Audio Settings (If Needed)

• The system supports linear PCM signals.
• Supported sampling frequencies: 32 kHz, 44.1 kHz, 48 kHz, 88.2 kHz, and 96 kHz.
• If there is no sound or noise occurs, ensure that the signal format and frequency are supported.
• If sound is still coming from the TV's speakers, lower the TV volume to its minimum or change the audio output settings in the TV's menu.

Troubleshooting Tips

• No sound? Ensure the optical cable is securely connected on both ends.
• Distorted sound? Check if the TV or device is set to PCM output.
• Still hearing sound from the TV speakers? Mute the TV or adjust its audio output settings to use external speakers.

By following these steps, you can enjoy high-quality digital sound from your SC-BMAX5 or SC-BMAX10 using an optical connection!