How to maintain the hair dryer

Always turn the power switch off and disconnect the plug from the household outlet. (Except when performing maintenance on the air outlet)

Do this when dirty

To clean the hair dryer (when it is dirty), soak a cloth in the soapy water and squeeze it out firmly, then wipe with the cloth. null

Do not use substances such as alcohol, nail polish remover or detergent (hand soap). Doing so may result in malfunction o
Do not leave the appliance with hairdressing products or cosmetics on it. Doing so will cause deterioration of the plastic, leading to discoloration and cracks.

Use commercially available cotton swabs. (We recommend the thin cotton swabs made for use with babies.)

This maintenance allows the hair dryer to sustain the generated level of nanoe™ over a long period.

Dampen the end of the cotton swab with tap water.
A needle portion is located deep within the nanoe™ outlet. Using the swab, rub this portion gently about 5 times.

Clean the air inlet once a month or over.

When dust etc. has built up, detach the filter from the hair dryer and remove the dust etc. using a toothbrush or vacuum cleaner.
Use a commercially available toothbrush.

Pull on the catch on the bottom side of the filter to detach.
Remove any dust etc. adhered to the fi lter or air inlet grille.
- Remove the dust etc. adhered to the outside of the fi lter using a vacuum cleaner. If this does not remove the dust, use the thick part of your fi ngers to push the dust etc. through the fine mesh on the internal side towards the metal mesh on the external side, and scrub away carefully with a toothbrush.
- Using the toothbrush, carefully scrub away any dust etc. from the internal side of the filter.
- Using a vacuum cleaner or toothbrush, carefully remove any dust etc. adhered to the air inlet.
- Rubbing forcefully with your nails may tear the filter, so please use a toothbrush.
Attach the filter securely, starting with the upper side.
- Keep pressing until you hear a “click” from both upper and lower catches.

The hair dryer should be plugged into the household outlet only in case of maintenance for the air outlet.
Use a commercially available toothbrush.
Switch the temperature selector to “COOL” and blow away the dust etc. as you scrub with the toothbrush.
During maintenance, do not block the air inlet with your hands etc.
Be careful when using the hair dryer for the first time after maintenance, since it may blow out dust etc.

Scrub to remove any dust, hair etc. blocking the mesh.