How to turn On and Off strobe light function

This unit is equipped with a function to turn off the strobe light while playing a record at a constant speed or stopped. The strobe light off function is Disabled ” by factory setting. That is, the strobe light will always be lit while the unit is turned on.

To “ Enable ” / “ Disable ” the strobe light off function

1. Turn [ ON/OFF (power) ] to turn the unit on.
2. With the turntable stopped, long press (approx. three seconds) the pitch range select button.
3. The function toggles between “ Enabled ” and “ Disabled ” each time the button is long pressed.
4. Check the strobe light. “Enabled”: The strobe light turns off. “Disabled”: The strobe light lights up.
   • The setting cannot be changed while the turntable is rotating.
   • The setting is remembered. The next time the power is turned on, the setting when the power was last turned off applies.

Operation of the strobe light off function

• The operation of the strobe light off function when it is “ Enabled ” is as follows:
  • The strobe light comes on after the turntable starts rotating and remains lit until the turntable reaches constant speed. -The strobe light turns off when the rotation is stable for a while after reaching constant speed. •The strobe light comes on if the rotation speed temporarily deviates from the constant speed due to an external load and the like. -The strobe light turns off when the rotation speed stabilizes.
  • When the strobe light off function is “ Disabled ”, the strobe light is always lit while the unit is turned on.