Home
>
Power Sources for SC-BMAX10 & SC-BMAX5

Power Sources for SC-BMAX10 & SC-BMAX5

The SC-BMAX10 and SC-BMAX5 wireless speaker systems can operate using two power sources:

1. Using the AC Power Supply

Connect the AC power supply cord only after all the other connections have been made.

  • Do not use any other AC power supply cord except the supplied one.
AC Power Connection

Conserving power

The system consumes a small amount of power when it is in low power mode. Disconnect the power supply if you do not use the system.

Some settings will be lost after you disconnect the system. You have to set them again

Using the Built-In-Battery

  • This unit contains lithium-ion rechargeable battery. Do not remove it except for when disposing of the product.
  • Charge the battery before use.
  • The battery is charged automatically when AC power supply cord is connected.
  • While the battery is being charged, the battery indicator bars scroll, and once fully charged, all the bars light up. SC-BMAX10 Charging Indicator
  • The battery indicator shows the battery levels. Image

Notes:

  • Connect to the AC power supply cord for first time use to wake up the battery.
  • Connect AC power supply cord for charging before battery is flat.
  • The unit will automatically shut down when the battery is flat.
  • When this unit is not used over a long period of time, charge the built-in battery at least once every 1-2 months to prevent it from deteriorating.
  • It is recommended to charge the battery in the temperature of between 10°C (50°F) and 35°C (95°F). The battery indicators may flash even though AC power supply cord is connected and charging may not be possible when it is out of recommended temperature range.
  • The battery may not charge when the temperature surrounding the battery is high during the operation or right after the operation even when it is within the recommended temperature range. In such case, stop the usage and let it cool down.
  • If the battery life is significantly reduced after a full charge, it may indicate that the battery needs replacement. Consult the store where you purchased the unit for a battery replacement. Alternatively, you can still use the unit by connecting it to an AC power source.