Troubleshooting - Clothes sometimes become brown after being ironed.
Ironing tips
- If there is laundry detergent remaining on the fabric, the clothes may become brown after being ironed.
- Check the fabric for specific ironing instruction, always follow manufacturer's instructions.
- Iron blended fabrics at a setting for lower-temperature fiber or for the highest percentage fiber.
- Use caution, some synthetics may melt at high temperature.
- Set the temperature correctly according to the fabric being ironed.
- Dry iron on reverse side, or use a press cloth on top of fabric.
- Don't sprinkle water directly on fabric to avoid spots.
- Dry iron on reverse side, or use a press cloth on top of fabric.
- Don't sprinkle water directly on fabric to avoid spots.
- Dry iron on reverse side, or use a press cloth on top of fabric.
- Don't sprinkle water directly on fabric to avoid spots.
- Steam ironing is suggested.
- Sprinkle water on the fabric, depending on its thickness.
- Iron dark fabrics on reverse side to avoid unwanted sheen.
- Dry iron on reverse side, or use a press cloth on top of fabric.
- Don't sprinkle water directly on fabric to avoid spots.
- Steam ironing is suggested.
- Iron dark fabrics on reverse side to avoid unwanted sheen.
- Dry iron on reverse side, or use a press cloth on top of fabric.
- Don't sprinkle water directly on fabric to avoid spots.
- Dry iron on reverse side, or use a press cloth on top of fabric.
- Don't sprinkle water directly on fabric to avoid spots.
- Dry iron on reverse side, or use a press cloth on top of fabric.
- Don't sprinkle water directly on fabric to avoid spots.
- Cover with brown paper and use it as a press cloth.
- Steam ironing is suggested.
- Never iron until completely dry, but leave it with a little moisture.
- To iron velvet, use steam but do not let the iron touch the fabric. Hold it slightly above the surface.
- Steam ironing is suggested.
- Never iron until completely dry, but leave it with a little moisture.
- Dry iron on reverse side, or use a press cloth on top of fabric.
- Don't sprinkle water directly on fabric to avoid spots.
- Dry iron on reverse side, or use a press cloth on top of fabric.
- Don't sprinkle water directly on fabric to avoid spots.
- Dry iron on reverse side, or use a press cloth on top of fabric.
- Don't sprinkle water directly on fabric to avoid spots.
- Steam ironing is suggested.
- Sprinkle water on the fabric, depending on its thickness.
- Iron dark fabrics on reverse side to avoid unwanted sheen.
- Dry iron on reverse side, or use a press cloth on top of fabric.
- Don't sprinkle water directly on fabric to avoid spots.
- Steam ironing is suggested.
- Iron dark fabrics on reverse side to avoid unwanted sheen.
- Dry iron on reverse side, or use a press cloth on top of fabric.
- Don't sprinkle water directly on fabric to avoid spots.
- Dry iron on reverse side, or use a press cloth on top of fabric.
- Don't sprinkle water directly on fabric to avoid spots.
- Dry iron on reverse side, or use a press cloth on top of fabric.
- Don't sprinkle water directly on fabric to avoid spots.
- Cover with brown paper and use it as a press cloth.
- Steam ironing is suggested.
- Never iron until completely dry, but leave it with a little moisture.
- To iron velvet, use steam but do not let the iron touch the fabric. Hold it slightly above the surface.
- Steam ironing is suggested.
- Never iron until completely dry, but leave it with a little moisture.
- Dry iron on reverse side, or use a press cloth on top of fabric.
- Don't sprinkle water directly on fabric to avoid spots.
- Dry iron on reverse side, or use a press cloth on top of fabric.
- Don't sprinkle water directly on fabric to avoid spots.
- Dry iron on reverse side, or use a press cloth on top of fabric.
- Don't sprinkle water directly on fabric to avoid spots.
- Dry iron on reverse side.
- To touch up collars, cuffs, pockets etc. lightly iron the surface.
- Steam ironing is suggested.
- Sprinkle water on the fabric, depending on its thickness.
- Iron dark fabrics on reverse side to avoid unwanted sheen.
- Dry iron on reverse side, or use a press cloth on top of fabric.
- Don't sprinkle water directly on fabric to avoid spots.
- Dry iron on reverse side.
- To touch up collars, cuffs, pockets etc. lightly iron the surface.
- Dry iron on reverse side.
- To touch up collars, cuffs, pockets etc. lightly iron the surface.
- Dry iron on reverse side.
- To touch up collars, cuffs, pockets etc. lightly iron the surface.
- Steam ironing is suggested.
- Iron dark fabrics on reverse side to avoid unwanted sheen.
- Dry iron on reverse side, or use a press cloth on top of fabric.
- Don't sprinkle water directly on fabric to avoid spots.
- Dry iron on reverse side, or use a press cloth on top of fabric.
- Don't sprinkle water directly on fabric to avoid spots.
- Dry iron on reverse side.
- To touch up collars, cuffs, pockets etc. lightly iron the surface.
- Dry iron on reverse side.
- To touch up collars, cuffs, pockets etc. lightly iron the surface.
- Dry iron on reverse side.
- To touch up collars, cuffs, pockets etc. lightly iron the surface.
- Dry iron on reverse side, or use a press cloth on top of fabric.
- Don't sprinkle water directly on fabric to avoid spots.
- Cover ironing board with brown paper and use it as a press cloth.
- Dry iron on reverse side.
- To touch up collars, cuffs, pockets etc. lightly iron the surface.
- Steam ironing is suggested.
- Never iron until completely dry, but leave it with a little moisture.
- To iron velvet, use steam but do not let the iron touch the fabric. Hold it slightly above the surface.
- Dry iron on reverse side.
- To touch up collars, cuffs, pockets etc. lightly iron the surface.
- Steam ironing is suggested.
- Never iron until completely dry, but leave it with a little moisture.
Model NI-E250TR
Temperature Selector Setting - Acrylic
Temperature Selector Setting - Acrylic
Temperature Selector Setting - Acrylic
Temperature Selector Setting - Silk
Dry iron on reverse side.
Temperature Selector Setting - Silk
Dry iron on reverse side.
Temperature Selector Setting - Cotton
Temperature Selector Setting - Acrylic
Temperature Selector Setting - Linen
Temperature Selector Setting - Acrylic
Temperature Selector Setting - Silk
Dry iron on reverse side.
Temperature Selector Setting - Acrylic
Temperature Selector Setting - Acrylic
Temperature Selector Setting - Silk
Dry iron on reverse side.
Temperature Selector Setting - 3 - Wool
Temperature Selector Setting - 3 - Wool
Model NI-E300T
Model NI-E650T
Model NI-E655TR
Temperature Selector Setting - Acrylic
Temperature Selector Setting - Acrylic
Temperature Selector Setting - Acrylic
Temperature Selector Setting - Silk
Dry iron on reverse side.
Temperature Selector Setting - 2 - Silk
Dry iron on reverse side.
Temperature Selector Setting - 4 - Cotton
Temperature Selector Setting - 1 - Acrylic
Temperature Selector Setting - 5 - Linen
Temperature Selector Setting - 1 - Acrylic
Temperature Selector Setting - 2 - Silk
Dry iron on reverse side.
Temperature Selector Setting - 1 - Acrylic
Temperature Selector Setting - 1 - Acrylic
Temperature Selector Setting - 2 - Silk
Dry iron on reverse side.
Temperature Selector Setting - 3 - Wool
Temperature Selector Setting - 3 - Wool
Model NI-E660S
Model NI-E665S
Model NI-L70SR
Model NI-M300T
Model NI-P300T
Model NI-QL1000
Temperature Selector Setting - Low
Temperature Selector Setting - Low
Temperature Selector Setting - Low
Temperature Selector Setting - Low
Dry iron on reverse side.
Temperature Selector Setting - Medium
Temperature Selector Setting - Low
Dry iron on reverse side.
Temperature Selector Setting - High
Temperature Selector Setting - Low
Temperature Selector Setting - Medium
Temperature Selector Setting - Medium
Temperature Selector Setting - Medium
Temperature Selector Setting - High
Temperature Selector Setting - Low
Temperature Selector Setting - Low
Dry iron on reverse side.
Temperature Selector Setting - Low
Temperature Selector Setting - Medium
Temperature Selector Setting - Medium
Temperature Selector Setting - Medium
Temperature Selector Setting - Low
Temperature Selector Setting - Low
Dry iron on reverse side.