Home
>
Troubleshooting - The television screen turns off.

Troubleshooting - The television screen turns off.

There are many factors that can cause the Television to Shut down. Select the model from the list below for troubleshooting operations.

For models not listed below refer to the operating instructions for specific model information.

Models TC-32AS500, TC-39AS500

Check the settings in the " Timer " menu.

  1. Press [ MENU ]
  2. Select "Timer"
  3. Check the "No activity for 4 hours" setting as well as the "No signal for 10 minutes" setting.
  4. Select "Stay on" for both if you do not want the television to turn off automatically.

Note:

No Activity for 4 hours

  • To conserve energy, the TV automatically turns off when there is no operation of the remote and side panel key for more than 4 hours.
  • If the “On/Off Timer” is set. "No activity for 4 hours will not be in use. 
  • “No activity for 4 hours was activated” will be displayed for about 10 seconds when the TV is turned on for the first time after the power was turned off by “No activity for 4 hours” feature.
  • The on-screen display will flash 3, 2 and 1 to indicate the last three (3) remaining minutes prior to the shut-off.

No signal for 10 minutes

  • To conserve energy, the TV automatically turns off when NO SIGNAL and NO OPERATION continue for more than 10 minutes.
  • Not in use when “On/Off Timer” is set.
  • “No signal for 10 minutes was activated” will be displayed for about 10 seconds when the TV is turned on for the first time after the power was turned off by “No signal for 10 minutes” feature.
  • The on-screen display will flash 3, 2 and 1 to indicate the last three (3) remaining minutes prior to the shut-off.

Models TC-39AS530, TC-50AS530, TC-55AS530, TC-60AS530

Models TC-39AS540, TC-50AS540, TC-55AS540, TC-60AS540

Models AS560

Models AS630

Models AS660

Models AS680

Models AS800

Models AX800

Models AX850

Models AX900

Models C400

Models CS540

Models CS560

Models CX400

  1. Press [ MENU ] and select " SETUP ".
  2. Press [ OK ]/[►].
  3. Press [◄]/[►] to select " SYSTEM " and press [ OK ].
  4. Press [▲]/[▼] to select " TIME " and press [ OK ].
  5. Press [▲]/[▼] to select " Sleep Timer " and select " Off ".

Models CX420

Models CX600

Check the settings in the " Eco Navigation " and " Timer " menu.

In Eco Navigation Menu

  1. Press [ MENU ]
  2. Select " Setup "
  3. Select " Eco Navigation "
  4. Check the " No activity for 4 hours " setting as well as the " No signal for 10 minutes " setting.
  5. Select " Stay on " for both if you do not want the television to turn off automatically.

In Timer Menu

  1. Press [ MENU ]
  2. Select "Timer"
  3. Check the "No activity for 4 hours" setting as well as the "No signal for 10 mintes" setting.
  4. Select "Stay on" for both if you do not want the television to turn off automatically.

Note:

No Activity for 4 hours

  • To conserve energy, the TV automatically turns off when there is no operation of the remote and side panel key for more than 4 hours.
  • If the “ On/Off Timer ” is set. " No activity for 4 hours " will not be in use. 
  • “ No activity for 4 hours was activated ” will be displayed for about 10 seconds when the TV is turned on for the first time after the power was turned off by “ No activity for 4 hours ” feature.
  • The on-screen display will flash " 3 ", " 2" and " 1 " to indicate the last three (3) remaining minutes prior to the shut-off.

No signal for 10 minutes

  • To conserve energy, the TV automatically turns off when No Signal and No Operation continue for more than 10 minutes.
  • Not in use when “ On/Off Timer ” is set.
  • “ No signal for 10 minutes was activated ” will be displayed for about 10 seconds when the TV is turned on for the first time after the power was turned off by “ No signal for 10 minutes ” feature.
  • The on-screen display will flash " 3 ", " 2 " and " 1 " to indicate the last three (3) remaining minutes prior to the shut-off.

Models CX650

Models CX800

Models CX850

Models DS600

Models DS630

Models DX650

Models DX700

Models DX800

Models DX900

Models ES600

Models EX600

Models EX601

Models EX750

Models EZ1000

Models EZ950

Models FX600

Models FX700

Models FX800

Models FZ1000

Models FZ950

Models GZ1000

Models GZ2000

Models GX700

  1. Press [ MENU ].
  2. Select " Setup " and press [ OK ].
  3. Press [▼] and select " Time setup " and press [ OK ].
  4. Press [▼] and select " Time " and press[ OK ].
  5. Press [▼] and select " Power Off Timer " and press [ OK ].
  6. Press the [▼] to select " Off " and press [ OK ].
  7. Press [ RETURN ] and press [▼] to select " Sleep Timer " and press [ OK }.
  8. Press [▼] to select " Off " and press [ OK ].
  9. Press [▼] to sleect " Auto Sleep " and press [ OK ].
  10. Press [▼] to select " Off " and press [ OK ].
  11. Press [▼] to select " No signal Power off " and press [ OK ].
  12. Press [▼] and select " Off " and press [ O K ].
  13. Press [ Exit ] to return back to your video display.

Models GX800

Models GX880

Models LE70