Common questions for the outoor Network camera model KX-HNC600

What are the power requirements.

120 V AC 60 Hz. electrical power

Does not operate on battery power.

Can you watch a live view through a computer?

No, Only viewable from a compatible smart device.

Can the camera's IR LED's be turned off?

No, It can not be turned off.

Does the camera have pan and tilt?

No it does not.

Does the camera support night vision?

Yes, up to 20ft (6m).

How many cameras can I connect to the KX-HN600 hub?

You can have a total of 4 cameras, including the indoor camera KX-HNC200 and outdoor camera KX-HNC600.

How many cameras can I view with the Home Network App at the same time?

You can view up to 4 indoor or outdoor cameras using the Quad view.

Is audio recorded with the videos?

Yes

Is the camera wall mountable?

Yes

Is the camera recorded data secure?

Yes. It can only be accessed by the registered mobile devices. It is highly secured by both device ID and MAC address that are exchanged during the initial setup.

Does the camera record in color?

Yes it is a full colour camera

What do the built in sensors do?

The camera has 2 sensor features that are used for motion detection: a visual sensor and an infrared sensor (i.e., heat sensor). These sensors can be used to trigger other actions like camera recording, turning on a light, etc.

What image sensor is being used in the Outdoor camera?

A 0.3 megapixel CMOS

What is the operating temperature specifications?

• The operating temperature is '-20°C – 50°C (-4 °F–122°F).
• Up to 90% relative air humidity.

Where are the photos and videos taken saved?

Photos are saved in your mobile device (smartphone or tablet). Video is saved in the microSD inserted in the hub.

Videos on the hub can be transferred to your mobile device.

View this video for more information on Live camera controls.

Will the camera work during a power failure?

No

Can the camera views on the multi screen be re-arranged?

Each camera view is arranged in the order that they were registered. In order to change the camera view, you have to deregister the camera and register again in order of your preference.