How do I change the remote control code?
When other equipment responds to the supplied remote control, change the remote control mode.
Model SU-G30
- The factory default is “Mode 1
- Press [SETUP].
- Press the arrow up ▲ or down ▼ button to select
“Remote Control” and
then press [OK].
- The current remote control code of this unit is displayed.
- When “Set Mode 1/2”
is displayed, set the remote control code of the remote
control.
- To set "Mode 1”: Press and hold [OK] and [1] for at least 4 seconds.
- To set “Mode 2”: Press and hold [OK] and [2] for at least 4 seconds.
- Point the remote control at this unit, and press and hold
[OK] for at least 4
seconds.
- When the remote control code is changed, the new code will appear on the display for a few seconds.
Model SU-GX70
- The factory default is “Mode 1”.
- Press [SETUP].
- Press [▲], [▼] to select “Remote
Control” and then press [OK].
- The current remote control mode of this unit is displayed.
- When “Set Mode 1/2” is displayed,
change the remote control mode of the
remote control.
To set “Mode 1”: Press and hold [OK] and [1] for at least 4 seconds.
To set “Mode 2”: Press and hold [OK] and [2] for at least 4 seconds. - Point the remote control at this unit, and press and hold [OK] for at least 4 seconds.
- When the remote control mode is changed, the new mode will appear on the display for a few seconds.
- When “Remote 1” or “Remote 2” is displayed When “Remote 1” or “Remote 2” is displayed, the remote control modes of this unit and remote control are different. Perform step 3 above.