How to care for and store your product. - NI-FS900

After each use

Please clean and maintain your product as the following.

Drainage, Cleaning and Maintenance of the Water tank

1. Turn off the Power button, unplug the Power plug.
2. Take out the Water tank from the Power base, rotate to open the cover, shake the water tank to clean its inner wall with the remaining water (or after filling proper amount of water), and then drain the Water tank.

Handling method of the remained water in the Power base

 

1. After draining the Water tank, plug the Power plug and press down the Power button [ ON/OFF ].
2. Hold the iron head horizontally and set the Steam selector to the High [2] or [3] steam position.
3. The remaining water in the Power base will be transported to the hot Soleplate and become steam.
4. Wait until the steam has come out completely from the Soleplate, and then set the Steam selector to the [0] position.
5. Turn off the Power button, unplug the Power plug.

Cleaning and Maintenance of the Iron head and Power base

1. Unplug the Power plug, wait until the Iron head, Iron holder and Power base have fully cooled down.
2. Wipe the Soleplate and the Power base with a soft cloth. For stubborn stains, use a soft cloth dipped with neutral detergent to clean.

Note:

Never use such cleaning products as the thinner, cleanser and volatile solvent to wash the Iron head or the Power base; otherwise damages may be caused.

Handling method of the Sponge

Steam or hot condensed water will be absorbed by the Sponge in the Iron holder, remove the Sponge and wash it with clean water, squeeze off the water, and air dry it in a dry place.

Note: As the Sponge is made from plant fiber, do not twist or pull the sponge with too much force when washing it.

Storage

1. Place the Iron head into the Iron holder.
2. Set the Steam selector to the [ 0 ] position.
3. Turn off the Power button, unplug the AC cord.
4. Store the product in a safe place.