How to change the lamp/bulb.- NN-P295
Be careful as the Oven Light Cover and the bulb may be hot.
- Unplug microwave oven or disconnect power.
- Remove the Vent Grille and Charcoal Filter. Tilt the Grille cover forward slowly as shown.
- Remove two screws from the front and one from the top, then
pull the Vent Grille forward.
- Remove the two screws on the charcoal filter as shown.
- Lift the tab of Oven Light Cover, and push back. Lift up
and remove the cover
- Replace the old bulb with a new one. (use Max. 125 V, 30 W)
If this bulb is not available locally, contact our
Authorized Panasonic Parts Distributor in Canada.
Authorized Panasonic Parts Distributor in USA. The lamp part number is F60305H00AP. - Reinstall the Oven Light cover securely aligning the hole
in cover, onto the detent.
- Install the Charcoal Filter aligning the two holes, then
secure with two screws as shown.
- Install the vent grille by sliding the top flange of
the Grille along the top plate, then tilt the Grille down to
fit as shown.
- Tilt the front louver downwards, then secure with three
screws, one on each side and one on top as shown.