How to configure the temperature sensor. - Baby Monitor
The temperature sensor is triggered when the set temperature range is exceeded.
You can specify how the temperature units (Celsius or Fahrenheit) are displayed on the monitor unit and the alert range.
For the alert range, specify an upper and lower limit. If the temperature of the room where the camera unit is installed goes outside of these limits, the monitor unit will notify you by lighting the smart LED indicator, playing a chime, etc.
Configuring the temperature units
- Press the Power button
located on the top of the monitor unit for about
2 seconds, to turn the unit on.
- Press [ MENU ].
- Press the arrow up ▲ or down ▼ button to select "Sensor Settings".
- Press [ OK ].
- Press the arrow up ▲ or down ▼ button to select "Temperature Sensor".
- Press [ OK ].
- Press the arrow up ▲ or down ▼ button to select "Units".
- Press [ OK ].
- Press the arrow up ▲ or down ▼ button to select the desired setting.
- Press [ OK ].
- Press [ MENU ] repeatedly to exit.
Configuring the alert range
- Press the Power button located on the top of the monitor unit for about
2 seconds, to turn the unit on.
- Press [ MENU ].
- Press the arrow up ▲ or down ▼ button to select "Sensor Settings".
- Press [ OK ].
- Press the arrow up ▲ or down ▼ button to select "Temperature Sensor".
- Press [ OK ].
- Press the arrow up ▲ or down ▼ button to select "Alert Range".
- Press [ OK ].
- Press the arrow left ◄ or right ► button to select "Lower Limit"
- Press the arrow up ▲ or down ▼ button to select the desired temperature.
- Press the arrow left ◄ or right ► button to select "Upper Limit"
- Press the arrow up ▲ or down ▼ button to select the desired temperature.
- Press [ OK ].
- Press [ MENU ] repeatedly to exit.
Note:
- The temperature sensor may not detect temperature accurately if the camera unit is exposed to warm or cool breezes from heating/cooling systems.
- If a power failure occurs or the power is disconnected, the temperature will not be accurate for up to an hour.