How to connect and disconnect a Bluetooth Device on Panasonic Network Audio Player
With the Panasonic Network Audio player you can connect a Bluetooth® device to listen to the sound from the Bluetooth ® device to this unit wirelessly. Select the model of Panasonic Network Audio Player for setup information on how to pair the Bluetooth® device. Please also refer to the Bluetooth® device operating instructions details.
Model SA-C100
-
Turn on the Bluetooth ® feature of the device and place the device near this unit.
- If a Bluetooth ® device is already connected, disconnect it.
- Press [-PAIRING].
- When “Pairing” is indicated on the display, proceed to step 7.
- By pressing and holding [-PAIRING] this unit starts waiting for registering. Proceed to step 7.
- Press [MENU].
- “Pairing” and then press OK].
- Press [▲], [▼] repeatedly to select.
- Press [▲], [▼] to select “Yes” and then press [OK].
- “Pairing” is displayed, and this unit waits for registering.
- Select “Technics-SA-C100-****” from the Bluetooth ® device’s menu.
- The name of the connected device is indicated
on the display.
- The MAC address “****” (“****” stands for a
character that is unique to each set.) may be
displayed before
“Technics-SA-C100-****” is displayed. - If the device name is set on the Google Home app, the set name is displayed.
- The MAC address “****” (“****” stands for a
character that is unique to each set.) may be
displayed before
Note
- You can also enter pairing mode by pressing and holding [-PAIRING] when the input source is “Bluetooth”.
- If prompted for the passkey, input “0000”.
- You can register up to 8 devices with this unit. If a 9th device is paired, the device that has not been used the longest may be replaced.
- While “Standby Mode” is set to “On”, this unit automatically turns on when a Bluetooth ® connection is established to this unit from a paired Bluetooth® device.
How to Disonnect a Bluetooth® device
- Press [MENU].
- Press [▲], [▼] repeatedly to select “Disconnect” and then press [OK].
- Press [▲], [▼] to select “Yes” and then press [OK].
Note
- The Bluetooth ® device will be disconnected if a different audio source is selected.
Operations during Play Back
Pause [
Press again to resume.]
Skip []
Search Press and hold []
Note:
- To use this unit’s remote control/playback operation buttons with a Bluetooth ® device, the Bluetooth ® device must support AVRCP (Audio Video Remote Control Profile). Depending on the status of the device, some controls may not work.
- When enjoying video contents with this function, the video and audio output may not be synchronized.
Model SA-C600
-
Turn on the Bluetooth ® feature of the device and place the device near this unit.
- If a Bluetooth ® device is already connected, disconnect it.
- Press [-PAIRING].
- When “Pairing” is indicated on the display, proceed to step 7.
- By pressing and holding [-PAIRING] this unit starts waiting for registering. Proceed to step 7.
- Press [MENU].
- “Pairing” and then press OK].
- Press [▲], [▼] repeatedly to select.
- Press [▲], [▼] to select “Yes” and then press [OK].
- “Pairing” is displayed, and this unit waits for registering.
- Select “Technics-SA-C600-****” from the Bluetooth ® device’s menu.
- The name of the connected device is indicated
on the display.
- The MAC address “****” (“****” stands for a
character that is unique to each set.) may be
displayed before
“Technics-SA-C600-****” is displayed. - If the device name is set on the Google Home app, the set name is displayed.
- The MAC address “****” (“****” stands for a
character that is unique to each set.) may be
displayed before
Note
- You can also enter pairing mode by pressing and holding [-PAIRING] when the input source is “Bluetooth”.
- If prompted for the passkey, input “0000”.
- You can register up to 8 devices with this unit. If a 9th device is paired, the device that has not been used the longest may be replaced.
- While “Standby Mode” is set to “On”, this unit automatically turns on when a Bluetooth ® connection is established to this unit from a paired Bluetooth® device.
How to Disonnect a Bluetooth® device
- Press [MENU].
- Press [▲], [▼] repeatedly to select “Disconnect” and then press [OK].
- Press [▲], [▼] to select “Yes” and then press [OK].
Note
- The Bluetooth ® device will be disconnected if a different audio source is selected.
Model SC-C65
-
Turn on the Bluetooth ® feature of the device and place the device near this unit.
- If a Bluetooth ® device is already connected, disconnect it.
- Press [-PAIRING].
- When “Pairing” is indicated on the display, proceed to step 7.
- By pressing and holding [-PAIRING] this unit starts waiting for registering. Proceed to step 7.
- Press [MENU].
- “Pairing” and then press OK].
- Press [▲], [▼] repeatedly to select.
- Press [▲], [▼] to select “Yes” and then press [OK].
- “Pairing” is displayed, and this unit waits for registering.
- Select “Technics-SC-C65-****” from the Bluetooth ® device’s menu.
- The name of the connected device is indicated
on the display.
- The MAC address “****” (“****” stands for a
character that is unique to each set.) may be
displayed before
“Technics-SC-C65-****” is displayed. - If the device name is set on the Google Home app, the set name is displayed.
- The MAC address “****” (“****” stands for a
character that is unique to each set.) may be
displayed before
Note
- You can also enter pairing mode by pressing and holding [-PAIRING] when the input source is “Bluetooth”.
- If prompted for the passkey, input “0000”.
- You can register up to 8 devices with this unit. If a 9th device is paired, the device that has not been used the longest may be replaced.
- While “Standby Mode” is set to “On”, this unit automatically turns on when a Bluetooth ® connection is established to this unit from a paired Bluetooth® device.
How to Disonnect a Bluetooth® device
- Press [MENU].
- Press [▲], [▼] repeatedly to select “Disconnect” and then press [OK].
- Press [▲], [▼] to select “Yes” and then press [OK].
Note
- The Bluetooth ® device will be disconnected if a different audio source is selected.
Model SL-G700
- Turn on the Bluetooth® feature of the device and place the device near this unit.
- Press [NWP].
- Press [>INPUT<] repeatedly to select
“Bluetooth”.
- You can also select the input source by turning the multi control knob after pressing [INPUT] on the unit.
- Press [MENU].
- Press [▲,▼] repeatedly to select “Pairing” and then press [OK].
- Press [▲,▼] to select “Yes” and then press
[OK].
- “Pairing” is indicated on the display.
- Select “SL-G700” from the Bluetooth®
device’s Bluetooth® menu.
- The name of the connected device is indicated on the display (example name set on the Google Home app. etc.).
Connecting the paired Bluetooth® device
- Press [>INPUT<] repeatedly to select
“Bluetooth”.
- If another Bluetooth ® device is already connected with this unit, disconnect from the Bluetooth ® device.
- Open the Bluetooth ® connection screen,
etc. on the Bluetooth ® device, and select
“Technics-SL-G700-****”*1, 2 .
- If the device name is set on the “Google Home” app, the set name is displayed.
- Play music by operating the Bluetooth ® device.
Notes:
- If prompted for the passkey, input “0000”.
- You can register up to 8 devices with this unit. If a 9th device is paired, the device that has not been used the longest will be replaced.
- Refer to the operating instructions of the
Bluetooth ® device for details.
- * “****” stands for a digit that is unique to each set.
- *The device name can be changed with the dedicated application “Technics Audio Center” (free of charge).
Model ST-C700
- Turn on the Bluetooth® feature of the device and place the device near this unit.
- Press [NWP].
- Press [>INPUT<] below [NWP] repeatedly.
- Press [MENU].
- Press [▲,▼] repeatedly to select “Pairing” and then press [OK].
- Press [▲,▼] to select “Yes” and then press
[OK].
- “Pairing” is indicated on the display.
- Select “ST-C700” from the Bluetooth®
device’s Bluetooth® menu.
- The name of the connected device is indicated on the display.
Notes:
- If prompted for the passkey, input “0000”.
- You can register up to 8 devices with this unit. If a 9th device is paired, the device that has not been used the longest will be replaced.
Connection by Near Field Communication with compatible NFC Bluetooth® devices (Android™ devices with version 4.1 or later) only
With the touch of an NFC (Near Field Communication)- compatible Bluetooth® device to this unit, you can complete a series of steps from registering a Bluetooth® device to connecting it to this unit
- Turn on the NFC feature of the device.
- Press [NWP].
- Press [>INPUT<] below [NWP] repeatedly to select “Bluetooth”. 3 Press [MENU]. 4 Press [▲, ▼] repeatedly to select “NFC” and then press [OK]. 5 Press [▲, ▼] to select “Yes” and then press [OK].
- Touch and hold your device on the NFC touch area of this unit within 20 seconds.
- Do not move the Bluetooth® device until it displays a message or reacts in some way.
Once the Bluetooth® device has reacted, move the
device away from this unit.
- When the connection of the Bluetooth® device is complete, the name of the connected device is indicated on the display.
- The location of the NFC touch area differs depending on the device. When a connection cannot be established even if your Bluetooth® device has touched the NFC touch area of this unit, change the position of the device.
- If you connect another NFC-compatible Bluetooth® device, the previously connected device will be disconnected automatically.
- When the connection is established, playback may start automatically depending on the type of device being used.
- Connecting by NFC may not work properly depending on the type of device being used.
- Do not make an NFC connection in any other way than instructed in the Owner’s Manual. Doing so may cause malfunction.
Notes: