How to Connect the transmitter with the USB Cable - Model SC-GNW10

Connect the transmitter to your game console’s/PC’s USB port. This device supports PC, PS4/PS5 Nintendo Switch. This device does not support Xbox.

Power is supplied from the USB port that the transmitter is connected to.
Before connecting the transmitter, make sure your PC/Game Console is powered on
The operation indicator of the transmitter lights (cyan) when there is a wireless connection with the SC-GNW10 and blinks (cyan) when there is no wireless connection with the SC-GNW10.
If the operation indicator on the transmitter is blinking red, check that you have connected using the supplied USB cable (approx. 1.0 m (3.2 ft))
In order to properly use the SC-GNW10, depending on the operating environment and OS, you need to change some sound settings on the computer.

Note

Do not use any other USB cables except the one which is supplied. Doing so may cause a malfunction. The shorter cable is specifically for recharging, and as such it cannot be used to connect with the transmitter.
The operation indicator of the transmitter blinks (cyan) (no wireless connection with SC-GNW10), but the operation indicator turns off after this continues for about a minute. The operation indicator turns off, but wireless connection is possible when SC-GNW10 turns on. When connected wirelessly with SC-GNW10 or [-PAIRING] button operations are performed, the indicator lights again.