How to fill the water tank.
- Confirm that the iron is unplugged.
- Set the Steam/Dry selector to the Dry position to avoid
water leakage.
Image varies by model - Open the Water Fill Cover, hold the iron as shown and fill
the iron with water up to the [ MAX ] dot or line.
Use a water cup for filling.- For models NI-W950, NI-U600 use the included water cup.
- For Models NI-QL1000, NI-QL2000N, NI-QL2000R, NI-WL607, NI-WL607AP,
NI-WL600, NI-WL602 the iron can be filled with the Water
tank in place or removed. To remove the water tank press
the [Water Tank Release]
Image varies by model
- Do not overfill. Check for the correct water fill level with the iron on its Heel Rest.
- Close the Water Fill Cover, or water will splash from the
Water Tank when ironing.
- For models NI-QL1000,NI-QL2000N, NI-QL2000R, NI-WL607, NI-WL607AP, NI-WL600, NI-WL602 Re-install the Water Tank into the main unit if it was removed and push it until a click sound is heard.
Note :
- Most tap water can be used in this iron.
- If the water is hard, distilled or demineralized water should be used.
- Do not use water processed through a home water softening system because this water contains minerals that may be harmful to the iron.
- Do not use water additives or substitute water such as linen or scented water in the steam iron. They can stain fabrics or damage the iron.