How to make a Network Connection. - SC-PMX150

Wired LAN cable connection

1. Disconnect the AC power supply cord.
2. Connect the main unit to a broadband router, etc. using a LAN cable.
   
   
   
3. Connect the AC power supply cord to the main unit and turn this system on.
   • When the connection is established, the Web “ ” icon is indicated on the main unit’s display.

Note

• Use category 5 or above straight LAN cables (STP) when connecting to peripheral devices.
• The LAN cable must be connected or disconnected while the AC power supply cord is disconnected.
• Inserting any cable other than a LAN cable in the LAN port can damage the system.
• If the LAN cable is disconnected, the network-related settings will be initialized. In that case, make the settings again.
• When a LAN cable is connected, the Wi-Fi function will be disabled.

Wireless LAN connection using an Internet browser.

This system has built-in Wi-Fi® and can be connected to a wireless router.

Preparation

• Place this system as close to the wireless router as possible.
• Do not connect a LAN cable. Doing so will disable the Wi-Fi® function.
• Point the antenna on the rear of the main unit up as shown in the figure.
  
  
• Do not tilt the antenna forward or backwards when it is pointing up.
• Do not apply too much force to the antenna.
• Do not carry this unit by holding the antenna.

Connect using a Smart Device

1. Turn this system on.
2. Press [RADIO, EXT-IN] on the remote control repeatedly to select "NETWORK".
3. Press [SETUP] on the remote control repeatedly to select "Net Setup" and then press [OK].
4. Press the arrow left ◄ or right ► button on the remote control to select "Manual" and then press [OK].
5. Press the arrow left ◄ or right ► button on the remote control to select "OK? Yes" and then press [OK].
   • After pressing [OK] to confirm "OK? Yes", the previous network connection you have set with this unit will be cleared.
   • Alternatively, while pressing and holding down on the [Open / Close] button on the unit, press and hold down on the Play Pause [ ] on the unit for at least 4 seconds. "Setting" blinks on the display.
6. On the Smart Device, go to the "Wi-Fi settings" in the "Settings" menu.
7. Select this unit "'PMX150'..._AJ" to connect to this system.
   
   
   • Display name in Smart device may not display exactly like the above example.
   • This can take up to 1 minute to appear in your Wi-Fi list.
   • If this operation does not work correctly, please repeat it several times.
   • iOS device: If "Panasonic PMX150..." appears under "SET UP NEW AIRPLAY SPEAKER..." instead, proceed to perform steps 5 to 7 of "Wireless LAN connection using the WAC (Wireless Accessory Configuration) to complete the network setting procedure.
   • Make sure that DHCP is enabled for the network setting on your compatible device.

About the network setting page:

iOS device: The settings page will be automatically displayed in the Internet browser.

Android devices: Swipe down the device’s notification bar to check for “Sign in to Wi-Fi network” notification and tap on it to display the setting page.

1. If there is no notification, open the Internet browser and refresh the page to display the settings page. If the settings page is not displayed, type "http://172.19.42.1/" into the URL address field.
2. Type a device name and then select "Next".
   
   
   
   • The device name will be displayed as this system's name on the network.
   • Maximum characters that can be shown is 32.
   • Emoji characters are not supported.
   • The device name is set when "Next" is selected.
   • You can also change the device name after the network connection is set up.
3. Select your Airplay security password for this system. This option can be skipped. To set the AirPlay password, Select "Yes" and then select "Next".
4. Set your password and then select "Next". You will need this password the next time this network setting method is used. If you have perform a network reset the password will be cleared.
5. Select your network name (SSID) and type the password.
   • Check the wireless router for the network name (SSID) and the password.
   • A list of network names (SSIDs) will be appeared when you select the "Network Name" box.
   • To show the characters typed in the "Password" box, select "Show Password".
   • If your network requires specific settings, deselect "DHCP" to disable DHCP.
   • You can use specific IP address, subnet mask, default gateway, primary DNS, etc.
   • To update the network name (SSID) list, select "Refresh list".
6. Select "Connect" to apply the settings.
   
   
   • On the main unit's display, "Success" appears when the connection is established. The Web icon will be displayed.
   • If "Fail" is displayed press [OK], check the network name (SSID) and the password, and then try the setting again.
   • Depending on the device, the connection complete screen may not be displayed.
7. Make sure to connect your compatible device back to your home wireless network.

Note:

• Enable Java and Cookies in your browser settings.

Wireless LAN connection using the app “Panasonic Music Streaming”.

The Panasonic Music Streaming App is an easy and convenient application supporting multiple wireless audio transmission technologies.

This system has built-in Wi-Fi® and can be connected to a wireless router.

Preparation

• Place this system as close to the wireless router as possible.
• Do not connect a LAN cable. Doing so will disable the Wi-Fi® function.
• Point the antenna on the rear of the main unit up as shown in the figure.
  
• Do not tilt the antenna forward or backwards when it is pointing up.
• Do not apply too much force to the antenna.
• Do not carry this unit by holding the antenna.

To Connect with App

1. Download the app "Panasonic Music Streaming" (free of charge) on your smartphone/tablet. (Always use the latest version of the app.)
   • iOS: App Store
   • Android: Google Play™
2. Start the app and follow the on-screen instructions.
3. Check that the connection has completed.
   • On the unit’s display, “Success” appears when the connection is established. the Web icon will be displayed.
   • If “Fail” is displayed press [OK], check the network name (SSID) and the password, and then try the setting again.

The operations and on-screen display items, etc. of the app “Panasonic Music Streaming” are subject to change.

For the latest information, visit Panasonic Global Audio Support Website.

Wireless LAN connection using the WAC (Wireless Accessory Configuration).

This system has built-in Wi-Fi® and can be connected to a wireless router.

Preparation

• Place this system as close to the wireless router as possible.
• Do not connect a LAN cable. Doing so will disable the Wi-Fi® function.
• Point the antenna on the rear of the main unit up as shown in the figure.
  
• Do not tilt the antenna forward or backwards when it is pointing up.
• Do not apply too much force to the antenna.
• Do not carry this unit by holding the antenna.

Connect using a Smart Device

The following setup is based on an iPhone.

1. Turn this system on.
2. Connect the iPhone to your wireless network.
3. Press [ RADIO, EXT-IN ] on the remote control repeatedly to select "NETWORK".
   • When "WAC Mode" is indicated on the display, proceed to step 4. If the display stays at "NETWORK", perform the operation for network reset.
4. Go to Wi-Fi settings on your iPhone.
5. Select "Panasonic PMX150...." under the "SET UP NEW AIRPLAY SPEAKER…".
   • Display name in iOS device may not display exactly like the above example.
6. The 'AirPlay Setup" screen appers on your iPhone.
   • This system will be displayed as "Panasonic PMX150".
7. To change the name, enter a new name to replace the existing one. You can also do the renaming after the network connection us set up.
8. You can set a password for this system under "SPEAKER PASSWORD". You will need this password if you make network settings by Internet browser next time.
9. Select "NEXT" to apply the settings.
   • On the main unit's display, "Success" appears when the connection is established. The Web icon will be displayed.
     
     

Wireless LAN connection using WPS (Wi-Fi Protected Setup).

This system has built-in Wi-Fi® and can be connected to a wireless router.

Preparation

• Place this system as close to the wireless router as possible.
• Do not connect a LAN cable. Doing so will disable the Wi-Fi® function.
• Point the antenna on the rear of the main unit up as shown in the figure.
  
• Do not tilt the antenna forward or backwards when it is pointing up.
• Do not apply too much force to the antenna.
• Do not carry this unit by holding the antenna.

Connect with WPS Router

A compatible wireless router should have the WPS identifer mark.

1. Turn this system on.
2. Press [RADIO, EXT-IN] on the remote control repeatedly to select "NETWORK".
3. To enter "WPS Push" mode, press [SETUP] on the remote control repeatedly to select "Net Setup" and then press [OK]. "WPS Push" is indicated on the display.
4. Press [OK].
5. Press the arrow left ◄ or right ► button on the remote control to select "OK? Yes" and then press [OK].
   • Alternatively, while pressing and holding down the skip forward [ ►►/►►] button on the main unit, press and hold [SELECTOR, -NET PRESET] on the main unit for at least 4 seconds.
   • If the unit is already connected to a wireless LAN network, "Network Initializing" is displayed for about 1 minute.
   • "WPS" flashes on the display.
6. Push (activate) the WPS button on the wireless router.
   • On the main unit's display, "Success" appears when the connection is established. The Web icon will be displayed.
   • "Fail" may be displayed if the connection was not made within the set time limit. Press [OK]. Try the setting again. If "Fail" is still displayed, try other methods.

Using the WPS PIN code

1. Turn this system on.
2. Press [RADIO, EXT-IN] on the remote control repeatedly to select "NETWORK".
3. To enter "WPS PIN" mode, press [SETUP] on the remote control repeatedly to select "Net Setup" and then press [OK].
4. Press the arrow left ◄ or right ► button on the remote control to select "WPS PIN" and then press [OK].
   • Alternatively, while pressing and holding down the skip forward [ ►►/►►] button on the main unit, press and hold [SELECTOR, -NET PRESET] on the main unit for at least 4 seconds.
   • If the unit is already connected to a wireless LAN network, "Network Initializing" is displayed for about 1 minute.
   • The PIN code is indicated on the display.
5. Enter the PIN code into the wireless router.

Note:

• Once the system enters WPS PIN code mode, you cannot set up using the WPS button. To use the WPS button, turn the system off and then on, and redo the network settings.
• Depending on a router, other connected devices may temporarily lose their connection.
• For details, refer to the operating instructions of the wireless router.