How to put a call on hold.

When a call is "Put on Hold" both you and the caller are muted. Neither can hear each other.

The process to put a call on hold does vary by model. For instructions on a particular model select the alpha numeric digits that the telephone model begins with from the list below.


If your model is not listed Refer to your models Operating Manual for specific instructions.



Model KX-TG113CSK

On the Handset

  1. Press [ MENU ] during an outside call.
  2. Press the arrow up ▲ or down ▼ button to select "Hold"
  3. Press [ SELECT].
  4. To release hold press the call call button icon button.
  • Another handset user can take the call by pressing the call call button icon button.
  • If a call is kept on hold for more than 9 minutes, an alarm tone starts to sound and the ringer indicator on the handset flashes rapidly. After 1 additional minute on hold, the call is disconnected.
  • If another phone is connected to the same line, you can also take the call by lifting its handset.

Model KX-TG133CSK

  • Another handset user can take the call by pressing the call call button icon button.
  • The base unit user can take the call by lifting the corded handset.

Using the Base unit

  1. Press [ Hold ] during an outside call. If you are using the corded handset, you can place it on the cradle.
  2. To release hold lift the corded handset.
    • Another handset user can take the call by pressing call call button icon button.

Note

  • While an outside call is on hold, the SP-PHONE indicator SP-PHONE icon on the base unit flashes.
  • After holding for 10 minutes, the call is disconnected.

Model KX-TG153CSK


Using the handset

  1. Press [ MENU ] during an outside call.
  2. Press the arrow up ▲ or down ▼ button to select "Hold"
  3. Press [ SELECT].
  4. To release hold on the cellular line: Press [ CELL ]
    • Another handset user can take the call by pressing [ CELL ]. If you press [ CELL ] and the selection list is displayed, select the desired cellular line and press [ SELECT ].
    • The base unit user can take the call by pressing [ CELL 1 ] or [ CELL 2 ] then lift the corded handset.
  5. To release hold on the landline: Press the call call button icon button.
    • Another handset user can take the call by pressing the call call button icon button.
    • The base unit user can take the call by listing the corded handset.

After holding for 10 minutes, the call is disconnected.


Base Unit

  1. Press [ Hold ] during an outside call. If you are using the corded handset, you can place it on the cradle.
  2. To release hold on the cellular line, Press [ CELL 1 ] or [ CELL 2 ] then lift the corded handset.
  3. A cordless handset user can take the call by pressing [ CELL ], then press the arrow up ▲ or down ▼ button to select the corresponding cellular phone. Press [ SELECT ]. The call is taken in the following situations.
    • Only 1 cellular phone is paired.
    • A specific line is set to make cellular calls.
  4. To release hold on the landline, lift the corded handset.
    • A handset user can take the call by pressing the call call button icon button.

Note

  • While a landline call is on hold, the SP-PHONE indicator flashes.
  • After holding for 10 minutes, the call is disconnected.

Model KX-TG163CSK

  • While a landline call is on hold, the SP-PHONE indicator flashes.
  • After holding for 10 minutes, the call is disconnected.

Model KX-TG175CSK


Using the handset

  1. Press [ MENU ]during an outside call.
  2. Press the arrow up ▲ or down ▼ button to select "Hold"
  3. Press [ SELECT ].
  4. To release hold on the cellular line: Press [ CELL ].
    • Another handset user can take the call by pressing [ CELL ]. If you press [ CELL ] and the selection list is displayed, select the desired cellular line and press [SELECT ].
    • The base unit user can take the call by pressing [ CELL 1 ] or [ CELL 2 ].
  5. To release hold on the landline: Press the call call button icon button.
    • Another handset user can take the call by pressing the call call button icon button.
    • The base unit user can take the call by pressing the speakerphone SP-PHONE icon button.

Note: After holding for 10 minutes, the call is disconnected.


Base Unit

  1. Press [ Hold ]during an outside call.
  2. To release hold on the cellular line, press [ CELL 1 ] or [ CELL 2 ].
  3. A cordless handset user can take the call by pressing [ CELL ], then press the arrow up ▲ or down ▼ button to select the corresponding cellular phone. Press [ SELECT ]. The call is taken in the following situations.
    • Only 1 cellular phone is paired.
    • A specific line is set to make cellular calls.
  4. To release hold on the landline press the speakerphone SP-PHONE icon button.
    • A handset user can take the call by pressing the call SP-PHONE icon button.

Note

  • While a landline call is on hold, the SP-PHONE indicator flashes.
  • After holding for 10 minutes, the call is disconnected.

Models KX-TG2711, KX-TG2722

  • Another handset user can take the call by pressing the call call button icon button.
  • If a call is kept on hold for more than 9 minutes, an alarm tone starts to sound and the ringer indicator on the handset flashes rapidly. After 1 additional minute on hold, the call is disconnected.
  • If another phone is connected to the same line, you can also take the call by lifting its handset.

Model KX-TG273CSK


Using the handset

  1. Press [ MENU ] during an outside call.
  2. Press the arrow up ▲ or down ▼ button to select "Hold"
  3. Press [ SELECT].
  4. To release hold on the cellular line: Press [ CELL ]
    • Another handset user can take the call by pressing[ CELL ]. If you press [ CELL ] snd the selection list is displayed, select the desired cellular line and press [ SELECT ].
  5. To release hold on the landline: Press the call call button icon button.
    • Another handset user can take the call by pressing the call call button icon button.

Note: After holding for 10 minutes, the call is disconnected.

Models KX-TG3634


  • Another handset user can take the call by pressing the call call button icon button.

Models KX-TG3645


  • Another handset user can take the call by pressing the call call button icon button.
  • The base unit user can take the call by pressing the speakerphone SP-PHONE icon button.

Using the Base unit

  1. Press [ Hold ] during an outside call.
  2. To release hold press the speakerphone SP-PHONE icon button.
    • Another handset user can take the call by pressing call call button icon button.

Models that start with KX-TG368


  1. Press [ MENU ] during an outside call.
  2. Press the arrow up ▲ or down ▼ button to select "Hold"
  3. Press [ SELECT ].
  4. To release hold press the call call button icon button.
    • Another handset user can take the call by pressing the call call button icon button.
  • After holding for 10 minutes, the call is disconnected.

Model KX-TG3760


KX-TG3752B


Using the handset

  1. Press [ MENU ] during an outside call.
  2. Press the arrow up ▲ or down ▼ button to select"Hold"
  3. Press [ SELECT ].
  4. To release hold press the call call button icon button.
    • Another handset user can take the call by pressing the call call button icon button.
    • The base unit user can take the call by pressing the speakerphone SP-PHONE icon button.

Using the Base unit

  1. Press [ Hold ]during an outside call.
  2. To release hold press the speakerphone SP-PHONE icon button.
    • Another handset user can take the call by pressing call call button icon button.

Note:

  • While an outside call is on hold, the SP-PHONE indicator SP-PHONE icon on the base unit flashes.
  • After holding for 10 minutes, the call is disconnected.

Models KX-TG385SK, KX-TG395CSK/SK


Using the handset

  1. Press [ MENU ] during an outside call.
  2. Press the arrow up ▲ or down ▼ button to select "Hold"
  3. Press [ SELECT ].
  4. To release hold on the cellular line: Press [ CELL ]
    • Another handset user can take the call by pressing [ CELL ] then press [ SELECT ].
      The call is taken in the following situations.
      • Only 1 cellular phone is paired.
      • A specific line is set to make cellular calls.
    • The base unit user can take the call by pressing [ CELL 1 ] or [ CELL 2 ].
  5. To release hold on the landline: Press the call call button icon button.
    • Another handset user can take the call by pressing the call call button icon button.
    • The base unit user can take the call by pressing the speakerphone SP-PHONE icon button.

Base Unit

  1. Press [ Hold ] during an outside call.
  2. To release hold on the cellular line:
    Press [ CELL 1 ] or [ CELL 2 ].
    • A handset user can take the call: Press [ CELL ], then press [ SELECT ].
      The call is taken in the following situations.
      • Only 1 cellular phone is paired.
      • A specific line is set to make cellular calls.
  3. To release hold on the landline: Press the speakerphone SP-PHONE icon button.
    • A handset user can take the call by pressing the call call button icon button.

Note:

  • While a landline call is on hold, the SP-PHONE indicator flashes.
  • If a call is kept on hold for more than 9 minutes, an alarm tone starts to sound. After 1 additional minute on hold, the call is disconnected
  • If another phone is connected to the same line, you can also take the landline call by lifting its handset.

Models KX-TG14111, KX-TG4112, KX-TG4113, KX-TG4114, KX-TG4132, KX-TG4133, KX-TG4134

  • Another handset user can take the call by pressing the call call button icon button.
  • If a call is kept on hold for more than 9 minutes, an alarm tone starts to sound and the ringer indicator on the handset flashes rapidly. After 1 additional minute on hold, the call is disconnected.
  • If another phone is connected to the same line, you can also take the call by lifting its handset.

Models KX-TG432SK, KX-TG433CSK/SK


Using the handset

  1. Press [ MENU ] during an outside call.
  2. Press the arrow up ▲ or down ▼ button to select "Hold"
  3. Press [ SELECT ].
  4. To release hold press the call call button icon button.
  • After holding for 10 minutes, the call is disconnected.

Models KX-TG443CSK or SK


Using the handset

  1. Press [ MENU ] during an outside call.
  2. Press the arrow up ▲ or down ▼ button to select "Hold"
  3. Press [ SELECT ].
  4. To release hold press the call call button icon button.
  • After holding for 10 minutes, the call is disconnected.

Models KX-TG454SK


Using the handset

  1. Press [ MENU ] during an outside call.
  2. Press the arrow up ▲ or down ▼ button to select "Hold"
  3. Press [ SELECT ].
  4. To release hold on the cellular line: Press [ CELL ]
    • Another handset user can take the call by pressing [ CELL ]. If you press [ CELL ] and the selection list is displayed, select the desired cellular line and press [ SELECT ].
  5. To release hold on the landline: Press the call call button icon button.
    • Another handset user can take the call by pressing the call call button icon button.

Note: After holding for 10 minutes, the call is disconnected.

Models KX-TG465CSK/SK


Using the handset

  1. Press [ MENU ] during an outside call.
  2. Press the arrow up ▲ or down ▼ button to select "Hold"
  3. Press [ SELECT ].
  4. To release hold on the cellular line: Press [ CELL ]
    • Another handset user can take the call by pressing [ CELL ]. If you press [ CELL ] and the selection list is displayed, select the desired cellular line and press [ SELECT ].
    • The base unit user can take the call by pressing [ CELL 1 ] or [ CELL 2 ].
  5. To release hold on the landline: Press the call call button icon button.
    • Another handset user can take the call by pressing the call call button icon button.
    • The base unit user can take the call by pressing the speakerphone SP-PHONE icon button.

Note: After holding for 10 minutes, the call is disconnected.


Base Unit

  1. Press [ Hold ] during an outside call.
  2. To release hold on the cellular line:
    Press [ CELL 1 ] or [ CELL 2 ].
    • A handset user can take the call: Press [ CELL ], then press the arrow up ▲ or down ▼ button to select the corresponding cellular phone. Press [ SELECT ].
      The call is taken in the following situations.
      • Only 1 cellular phone is paired.
      • A specific line is set to make cellular calls.
  3. To release hold on the landline: Press the speakerphone SP-PHONE icon button.
    • A handset user can take the call by pressing the call call button icon button.

Note:

  • While a landline call is on hold, the SP-PHONE indicator flashes.
  • After holding for 10 minutes, the call is disconnected.

Models KX-TG472SK or KX-TG473SK


Using the handset

  1. Press [ MENU ] during an outside call.
  2. Press the arrow up ▲ or down ▼ button to select "Hold"
  3. Press [ SELECT ].
  4. To release hold on the cellular line: Press [ CELL ]
    • Another handset user can take the call by pressing [ CELL ]. If you press [ CELL ] and the selection list is displayed, select the desired cellular line and press [ SELECT ].
  5. To release hold on the landline: Press the call call button icon button.
    • Another handset user can take the call by pressing the call call button icon button.

Note: After holding for 10 minutes, the call is disconnected.

Model KX-TG484SK


Using the handset

  1. Press [ MENU ] during an outside call.
  2. Press the arrow up ▲ or down ▼ button to select "Hold"
  3. Press [ SELECT ].
  4. To release hold on the cellular line: Press [ CELL ]
    • Another handset user can take the call by pressing [ CELL ]. If you press [ CELL ] and the selection list is displayed, select the desired cellular line and press [ SELECT ].
  5. To release hold on the landline: Press the call call button icon button.
    • Another handset user can take the call by pressing the call call button icon button.

Note: After holding for 10 minutes, the call is disconnected.

Models KX-TG572SK or KX-TG573SK


Using the handset

  1. Press [ MENU ] during an outside call.
  2. Press the arrow up ▲ or down ▼ button to select "Hold"
  3. Press [ SELECT ].
  4. To release hold press the call call button icon button.
    • Another handset user can take the call by pressing the call call button icon button.
    • The base unit user can take the call by lifting the corded handset.

Using the Base unit

  1. Press [ Hold ] during an outside call. If you are using the corded handset, you can place it on the cradle.
  2. To release hold lift the corded handset.
    • Another handset user can take the call by pressing call call button icon button.

Note:

  • While an outside call is on hold, the SP-PHONE indicator SP-PHONE icon on the base unit flashes.
  • After holding for 10 minutes, the call is disconnected.

Model KX-TG6145SK


Using the handset

  1. Press [ MENU ] during an outside call.
  2. Press the arrow up ▲ or down ▼ button to select "Hold"
  3. Press [ SELECT ].
  4. To release hold press the call call button icon button.
    • Another handset user can take the call by pressing the call call button icon button.
    • The base unit user can take the call by pressing the speakerphone SP-PHONE icon button.

Using the Base unit

  1. Press [ Hold ] during an outside call.
  2. To release hold press the speakerphone SP-PHONE icon button.
    • Another handset user can take the call by pressing call call button icon button.

Note:

  • While an outside call is on hold, the SP-PHONE indicator SP-PHONE icon on the base unit flashes.
  • After holding for 10 minutes, the call is disconnected.

Model KX-TG633SK


  1. Press [ MENU ] during an outside call.
  2. Press the arrow up ▲ or down ▼ button to select "Hold"
  3. Press [ SELECT ].
  4. To release hold press the call call button icon button.
  • After holding for 10 minutes, the call is disconnected.

Models KX-TG654SK or KX-TG684SK


Using the handset

  1. Press [ MENU ] during an outside call.
  2. Press the arrow up ▲ or down ▼ button to select "Hold"
  3. Press [ SELECT ].
  4. To release hold on the cellular line: Press [ CELL ]
    • Another handset user can take the call by pressing [ CELL ]. If you press [ CELL ] and the selection list is displayed, select the desired cellular line and press [ SELECT ].
  5. To release hold on the landline: Press the call call button icon button.
    • Another handset user can take the call by pressing the call call button icon button.

Note: After holding for 10 minutes, the call is disconnected.

Model KX-TG7122SK


  1. Press [ MENU ] during an outside call.
  2. Press the arrow up ▲ or down ▼ button to select "Hold"
  3. Press [ SELECT ].
  4. To release hold press the call call button icon button.
  • After holding for 10 minutes, the call is disconnected.

Model KX-TG744SK


Models that begin with KX-TG784


Using the handset

  1. Press [ MENU ] during an outside call.
  2. Press the arrow up ▲ or down ▼ button to select "Hold"
  3. Press [ SELECT ].
  4. To release hold on the cellular line: Press [ CELL ]
    • Another handset user can take the call by pressing [ CELL ] then press [ SELECT ].
      The call is taken in the following situations.
      • Only 1 cellular phone is paired.
      • A specific line is set to make cellular calls.
    • The base unit user can take the call by pressing [ CELL 1 ] or [ CELL 2 ].
  5. To release hold on the landline: Press the call call button icon button.
    • Another handset user can take the call by pressing the call call button icon button.
    • The base unit user can take the call by pressing the speakerphone SP-PHONE icon button.

Base Unit

  1. Press [ Hold ] during an outside call.
  2. To release hold on the cellular line:
    Press [ CELL 1 ] or [ CELL 2 ].
    • A handset user can take the call: Press [ CELL ], then press [ SELECT ].
      The call is taken in the following situations.
      • Only 1 cellular phone is paired.
      • A specific line is set to make cellular calls.
  3. To release hold on the landline: Press the speakerphone SP-PHONE icon button.
    • A handset user can take the call by pressing the call call button icon button.

Note:

  • While a landline call is on hold, the SP-PHONE indicator flashes.
  • If a call is kept on hold for more than 9 minutes, an alarm tone starts to sound. After 1 additional minute on hold, the call is disconnected
  • If another phone is connected to the same line, you can also take the landline call by lifting its handset.

Model KX-TG785SK


Using the handset

  1. Press [ MENU ] during an outside call.
  2. Press the arrow up ▲ or down ▼ button to select "Hold"
  3. Press [ SELECT ].
  4. To release hold on the cellular line: Press [ CELL ]
    • Another handset user can take the call by pressing [ CELL ]. If you press [ CELL ] and the selection list is displayed, select the desired cellular line and press [ SELECT ].
    • The base unit user can take the call by pressing [ CELL 1 ] or [ CELL 2 ].
  5. To release hold on the landline: Press the call call button icon button.
    • Another handset user can take the call by pressing the call call button icon button.
    • The base unit user can take the call by pressing the speakerphone SP-PHONE icon button.

Note: After holding for 10 minutes, the call is disconnected.


Base Unit

  1. Press [ Hold ] during an outside call.
  2. To release hold on the cellular line:
    Press [ CELL 1 ] or [ CELL 2 ].
    • A handset user can take the call: Press [ CELL ], then press the arrow up ▲ or down ▼ button to select the corresponding cellular phone. Press [ SELECT ].
      The call is taken in the following situations.
      • Only 1 cellular phone is paired.
      • A specific line is set to make cellular calls.
  3. To release hold on the landline: Press the speakerphone SP-PHONE icon button.
    • A handset user can take the call by pressing the call call button icon button.

Note:

  • While a landline call is on hold, the SP-PHONE indicator flashes.
  • After holding for 10 minutes, the call is disconnected.

Models that begin with KX-TG787


Using the handset

  1. Press [ MENU ] during an outside call.
  2. Press the arrow up ▲ or down ▼ button to select "Hold"
  3. Press [ SELECT ].
  4. To release hold on the cellular line: Press [ CELL ]
    • Another handset user can take the call by pressing [ CELL ] then press [ SELECT ].
      The call is taken in the following situations.
      • Only 1 cellular phone is paired.
      • A specific line is set to make cellular calls.
    • The base unit user can take the call by pressing [ CELL 1 ] or [ CELL 2 ].
  5. To release hold on the landline: Press the call call button icon button.
    • Another handset user can take the call by pressing the call call button icon button.
    • The base unit user can take the call by pressing the speakerphone SP-PHONE icon button.

Base Unit

  1. Press [ Hold ] during an outside call.
  2. To release hold on the cellular line:
    Press [ CELL 1 ] or [ CELL 2 ].
    • A handset user can take the call: Press [ CELL ], then press [ SELECT ].
      The call is taken in the following situations.
      • Only 1 cellular phone is paired.
      • A specific line is set to make cellular calls.
  3. To release hold on the landline: Press the speakerphone SP-PHONE icon button.
    • A handset user can take the call by pressing the call call button icon button.

Note:

  • While a landline call is on hold, the SP-PHONE indicator flashes.
  • If a call is kept on hold for more than 9 minutes, an alarm tone starts to sound. After 1 additional minute on hold, the call is disconnected
  • If another phone is connected to the same line, you can also take the landline call by lifting its handset.

Models KX-TG833SK


Using the handset

  1. Press [ MENU ] during an outside call.
  2. Press the arrow up ▲ or down ▼ button to select "Hold"
  3. Press [ SELECT ].
  4. To release hold on the cellular line: Press [ CELL ]
    • Another handset user can take the call by pressing [ CELL ]. If you press [ CELL ] and the selection list is displayed, select the desired cellular line and press [ SELECT ].
  5. To release hold on the landline: Press the call call button icon button.
    • Another handset user can take the call by pressing the call call button icon button.

Note: After holding for 10 minutes, the call is disconnected.

Models KX-TG885SK


Using the handset

  1. Press [ MENU ] during an outside call.
  2. Press the arrow up ▲ or down ▼ button to select "Hold"
  3. Press [ SELECT ].
  4. To release hold on the cellular line: Press [ CELL ]
    • Another handset user can take the call by pressing [ CELL ]. If you press [ CELL ] and the selection list is displayed, select the desired cellular line and press [ SELECT ].
    • The base unit user can take the call by pressing [ CELL 1 ] or [ CELL 2 ].
  5. To release hold on the landline: Press the call call button icon button.
    • Another handset user can take the call by pressing the call call button icon button.
    • The base unit user can take the call by pressing the speakerphone SP-PHONE icon button.

Note: After holding for 10 minutes, the call is disconnected.


Base Unit

  1. Press [ Hold ] during an outside call.
  2. To release hold on the cellular line:
    Press [ CELL 1 ] or [ CELL 2 ].
    • A handset user can take the call: Press [ CELL ], then press the arrow up ▲ or down ▼ button to select the corresponding cellular phone. Press [ SELECT ].
      The call is taken in the following situations.
      • Only 1 cellular phone is paired.
      • A specific line is set to make cellular calls.
  3. To release hold on the landline: Press the speakerphone SP-PHONE icon button.
    • A handset user can take the call by pressing the call call button icon button.

Note:

  • While a landline call is on hold, the SP-PHONE indicator flashes.
  • After holding for 10 minutes, the call is disconnected.

For models that start with KX-TG954 or KX-TG955


Using the handset

  1. Press [ MENU ] during an outside call.
  2. Press the arrow up ▲ or down ▼ button to select "Hold"
  3. Press [ SELECT ]. During hold, the caller will hear music.
  4. To release hold on the cellular line: Press [ CELL ]
    • Another handset user can take the call by pressing [ CELL ]. If you press [ CELL ] and the selection list is displayed, select the desired cellular line and press [ SELECT ].
    • The base unit user can take the call by pressing the corresponding cellular line key [ CELL 1 ] to [ CELL 4 ].
  5. To release hold on the landline: Press [ L1 or L2 ].

Note: After holding for 10 minutes, the call is disconnected.


Base Unit

  1. Press [ Hold ] during an outside call. During hold, the caller will hear music.
  2. To release hold on the cellular line:
    Press the corresponding cellular line key [ CELL 1 ] to [ CELL 4 ].
    • A handset user can take the call: Press [ CELL ], then press the arrow up ▲ or down ▼ button to select the corresponding cellular phone. Press [ SELECT ].
      The call is taken in the following situations.
      • Only 1 cellular phone is paired.
      • A specific line is set to make cellular calls.
  3. To release hold on the landline: Press [ L1 or L2 ].

Note:

  • While a landline call is on hold, the SP-PHONE indicator flashes.
  • After holding for 10 minutes, the call is disconnected.

Models KX-TG985SK or KX-TG994SK


Using the handset

  1. Press [ MENU ] during an outside call.
  2. Press the arrow up ▲ or down ▼ button to select "Hold"
  3. Press [ SELECT ].
  4. To release hold on the cellular line: Press [ CELL ]
    • Another handset user can take the call by pressing [ CELL ]. If you press [ CELL ] and the selection list is displayed, select the desired cellular line and press [ SELECT ].
    • The base unit user can take the call by pressing [ CELL 1 ] or [ CELL 2 ].
  5. To release hold on the landline: Press the call call button icon button.
    • Another handset user can take the call by pressing the call call button icon button.
    • The base unit user can take the call by pressing the speakerphone SP-PHONE icon button.

Note: After holding for 10 minutes, the call is disconnected.


Base Unit

  1. Press [ Hold ] during an outside call.
  2. To release hold on the cellular line:
    Press [ CELL 1 ] or [ CELL 2 ].
    • A handset user can take the call: Press [ CELL ], then press the arrow up ▲ or down ▼ button to select the corresponding cellular phone. Press [ SELECT ].
      The call is taken in the following situations.
      • Only 1 cellular phone is paired.
      • A specific line is set to make cellular calls.
  3. To release hold on the landline: Press the speakerphone SP-PHONE icon button.
    • A handset user can take the call by pressing the call call button icon button.

Note:

  • While a landline call is on hold, the SP-PHONE indicator flashes.
  • After holding for 10 minutes, the call is disconnected.

For models that start with KX-TGC21, KX-TGC22 or KX-TGC253


  1. Press [ MENU ] during an outside call.
  2. Press the arrow up ▲ or down ▼ button to select "Hold"
  3. Press [ SELECT ].
  4. To release hold press the call call button icon button.
  • After holding for 10 minutes, the call is disconnected.

For models that start with KX-TGC35, KX-TGC36 or KX-TGC38


  1. Press [ MENU ] during an outside call.
  2. Press the arrow up ▲ or down ▼ button to select "Hold"
  3. Press [ SELECT ].
  4. To release hold press the call call button icon button.
  • After holding for 10 minutes, the call is disconnected.

For models that start with KX-TGD21 or KX-TGD22


  1. Press [ MENU ] during an outside call.
  2. Press the arrow up ▲ or down ▼ button to select "Hold"
  3. Press [ SELECT ].
  4. To release hold press the call call button icon button.
  • After holding for 10 minutes, the call is disconnected.

For models that start with KX-TGD39


  • While a landline call is on hold, the SP-PHONE indicator flashes.
  • After holding for 10 minutes, the call is disconnected.

For models that start with KX-TGD43


  1. Press [ MENU ] during an outside call.
  2. Press the arrow up ▲ or down ▼ button to select "Hold"
  3. Press [ SELECT ].
  4. To release hold press the call call button icon button.
  • After holding for 10 minutes, the call is disconnected.

For models that start with KX-TGD51 and KX-TGD53


  1. Press [ MENU ] during an outside call.
  2. Press the arrow up ▲ or down ▼ button to select "Hold"
  3. Press [ SELECT ].
  4. To release hold press the call call button icon button.
  • After holding for 10 minutes, the call is disconnected.

Models that begin with KX-TGD56, KX-TGD58, KX-TGD593, KX-TGD59


For models that start with KX-TGE21, KX-TGE23


  1. Press [ MENU ] during an outside call.
  2. Press the arrow up ▲ or down ▼ button to select "Hold"
  3. Press [ SELECT ].
  4. To release hold press the call call button icon button.
  • After holding for 10 minutes, the call is disconnected.

For models that start with KX-TGE24


Using the handset

  1. Press [ MENU ] during an outside call.
  2. Press the arrow up ▲ or down ▼ button to select "Hold"
  3. Press [ SELECT ].
  4. To release hold press the call call button icon button.
    • Another handset user can take the call by pressing the call call button icon button.
    • The base unit user can take the call by pressing the speakerphone SP-PHONE icon button.

Using the Base unit

  1. Press [ Hold ] during an outside call.
  2. To release hold press the speakerphone SP-PHONE icon button.
    • Another handset user can take the call by pressing call call button icon button.

Note:

  • While an outside call is on hold, the SP-PHONE indicator SP-PHONE icon on the base unit flashes.
  • After holding for 10 minutes, the call is disconnected.

For models that start with KX-TGE26


  1. Press [ MENU ] during an outside call.
  2. Press the arrow up ▲ or down ▼ button to select "Hold"
  3. Press [ SELECT ].
  4. To release hold on the cellular line: Press [ CELL ]
    • Another handset user can take the call by pressing [ CELL ]. If you press [ CELL ] and the selection list is displayed, select the desired cellular line and press [ SELECT ].
  5. To release hold on the landline: Press the call call button icon button.
    • Another handset user can take the call by pressing the call call button icon button.

Note: After holding for 10 minutes, the call is disconnected.

For models that start with KX-TGE27


  1. Press [ MENU ] during an outside call.
  2. Press the arrow up ▲ or down ▼ button to select "Hold"
  3. Press [ SELECT ].
  4. To release hold on the cellular line: Press [ CELL ]
    • Another handset user can take the call by pressing [ CELL ]. If you press [ CELL ] and the selection list is displayed, select the desired cellular line and press [ SELECT ].
    • The base unit user can take the call by pressing [ CELL 1 ] or [ CELL 2 ].
  5. To release hold on the landline: Press the call call button icon button.
    • Another handset user can take the call by pressing the call call button icon button.
    • The base unit user can take the call by pressing the speakerphone SP-PHONE icon button.

Note: After holding for 10 minutes, the call is disconnected.


Base Unit

  1. Press [ Hold ] during an outside call.
  2. To release hold on the cellular line:
    Press [ CELL 1 ] or [ CELL 2 ].
    • A handset user can take the call: Press [ CELL ], then press the arrow up ▲ or down ▼ button to select the corresponding cellular phone. Press [ SELECT ].
      The call is taken in the following situations.
      • Only 1 cellular phone is paired.
      • A specific line is set to make cellular calls.
  3. To release hold on the landline: Press the speakerphone SP-PHONE icon button.
    • A handset user can take the call by pressing the call call button icon button.

Note:

  • While a landline call is on hold, the SP-PHONE indicator flashes.
  • After holding for 10 minutes, the call is disconnected.

For models that start with KX-TGE43


  1. Press [ MENU ] during an outside call.
  2. Press the arrow up ▲ or down ▼ button to select "Hold"
  3. Press [ SELECT ].
  4. To release hold press the call call button icon button.
    • Another handset user can take the call by pressing the call call button icon button.

For models that start with KX-TGE445


Using the handset

  1. Press [ MENU ] during an outside call.
  2. Press the arrow up ▲ or down ▼ button to select "Hold"
  3. Press [ SELECT ].
  4. To release hold press the call call button icon button.
    • Another handset user can take the call by pressing the call call button icon button.
    • The base unit user can take the call by pressing the speakerphone SP-PHONE icon button.

Using the Base unit

  1. Press [ Hold ] during an outside call.
  2. To release hold press the speakerphone SP-PHONE icon button.
    • Another handset user can take the call by pressing call call button icon button.

For models that start with KX-TGE46


  1. Press [ MENU ] during an outside call.
  2. Press the arrow up ▲ or down ▼ button to select "Hold"
  3. Press [ SELECT ].
  4. To release hold on the cellular line: Press [ CELL ]
    • Another handset user can take the call by pressing [ CELL ]. If you press [ CELL ] and the selection list is displayed, select the desired cellular line and press [ SELECT ].
  5. To release hold on the landline: Press the call call button icon button.
    • Another handset user can take the call by pressing the call call button icon button.

Note: After holding for 10 minutes, the call is disconnected.

For models that start with KX-TGE47


Using the handset

  1. Press [ MENU ] during an outside call.
  2. Press the arrow up ▲ or down ▼ button to select "Hold"
  3. Press [ SELECT ].
  4. To release hold on the cellular line: Press [ CELL ]
    • Another handset user can take the call by pressing [ CELL ]. If you press [ CELL ] and the selection list is displayed, select the desired cellular line and press [ SELECT ].
    • The base unit user can take the call by pressing [ CELL 1 ] or [ CELL 2 ].
  5. To release hold on the landline: Press the call call button icon button.
    • Another handset user can take the call by pressing the call call button icon button.
    • The base unit user can take the call by pressing the speakerphone SP-PHONE icon button.

Note: After holding for 10 minutes, the call is disconnected.


Base Unit

  1. Press [ Hold ] during an outside call.
  2. To release hold on the cellular line:
    Press [ CELL 1 ] or [ CELL 2 ].
    • A handset user can take the call: Press [ CELL ], then press the arrow up ▲ or down ▼ button to select the corresponding cellular phone. Press [ SELECT ].
      The call is taken in the following situations.
      • Only 1 cellular phone is paired.
      • A specific line is set to make cellular calls.
  3. To release hold on the landline: Press the speakerphone SP-PHONE icon button.
    • A handset user can take the call by pressing the call call button icon button.

Note:

  • While a landline call is on hold, the SP-PHONE indicator flashes.
  • After holding for 10 minutes, the call is disconnected.

For models that start with KX-TGE63


  1. Press [ MENU ] during an outside call.
  2. Press the arrow up ▲ or down ▼ button to select "Hold"
  3. Press [ SELECT ].
  4. To release hold press the call call button icon button.
  5. Another handset user can take the call by pressing the call call button icon button.
  • After holding for 10 minutes, the call is disconnected.

For models that start with KX-TGE64


Using the handset

  1. Press [ MENU ] during an outside call.
  2. Press the arrow up ▲ or down ▼ button to select "Hold"
  3. Press [ SELECT ].
  4. To release hold press the call call button icon button.
    • Another handset user can take the call by pressing the call call button icon button.
    • The base unit user can take the call by pressing the speakerphone SP-PHONE icon button.

Using the Base unit

  1. Press [ Hold ] during an outside call.
  2. To release hold press the speakerphone SP-PHONE icon button.
    • Another handset user can take the call by pressing call call button icon button.

Note:

  • While an outside call is on hold, the SP-PHONE indicator SP-PHONE icon on the base unit flashes.
  • After holding for 10 minutes, the call is disconnected.

For models that start with KX-TGE66


  1. Press [ MENU ] during an outside call.
  2. Press the arrow up ▲ or down ▼ button to select "Hold"
  3. Press [ SELECT ].
  4. To release hold on the cellular line: Press [ CELL ]
    • Another handset user can take the call by pressing [ CELL ]. If you press [ CELL ] and the selection list is displayed, select the desired cellular line and press [ SELECT ].
  5. To release hold on the landline: Press the call call button icon button.
    • Another handset user can take the call by pressing the call call button icon button.

Note: After holding for 10 minutes, the call is disconnected.

For models that start with KX-TGF34


Using the handset

  1. Press [ MENU ] during an outside call.
  2. Press the arrow up ▲ or down ▼ button to select "Hold"
  3. Press [ SELECT ].
  4. To release hold press the call call button icon button.
    • Another handset user can take the call by pressing the call call button icon button.
    • The base unit user can take the call by pressing the speakerphone SP-PHONE icon button.

Using the Base unit

  1. Press [ Hold ] during an outside call.
  2. To release hold press the speakerphone SP-PHONE icon button.
    • Another handset user can take the call by pressing call call button icon button.

Note:

  • While an outside call is on hold, the SP-PHONE indicator SP-PHONE icon on the base unit flashes.
  • After holding for 10 minutes, the call is disconnected.

For models that start with KX-TGF35


  • Another handset user can take the call by pressing the call call button icon button.
  • The base unit user can take the call by lifting the corded handset.

Note

  • While an outside call is on hold, the SP-PHONE indicator SP-PHONE icon on the base unit flashes.
  • After holding for 10 minutes, the call is disconnected.

Models KX-TGF372, KX-TGF373


For models that start with KX-TGF38


Using the handset

  1. Press [ MENU ] during an outside call.
  2. Press the arrow up ▲ or down ▼ button to select "Hold"
  3. Press [ SELECT ].
  4. To release hold on the cellular line: Press [ CELL ]
    • Another handset user can take the call by pressing [ CELL ]. If you press [ CELL ] and the selection list is displayed, select the desired cellular line and press [ SELECT ].
    • The base unit user can take the call by pressing [ CELL 1 ] or [ CELL 2 ] then lift the corded handset.
  5. To release hold on the landline: Press the call call button icon button.
    • Another handset user can take the call by pressing the call call button icon button.
    • The base unit user can take the call by listing the corded handset.

Note: After holding for 10 minutes, the call is disconnected.


Base Unit

  1. Press [ Hold ] during an outside call. If you are using the corded handset, you can place it on the cradle.
  2. To release hold on the cellular line:
    Press [ CELL 1 ] or [ CELL 2 ] then lift the corded handset.
    • A handset user can take the call: Press [ CELL ], then press the arrow up ▲ or down ▼ button to select the corresponding cellular phone. Press [ SELECT ].
      The call is taken in the following situations.
      • Only 1 cellular phone is paired.
      • A specific line is set to make cellular calls.
  3. To release hold on the landline: Lift the corded handset.
    • A handset user can take the call by pressing the call call button icon button.

Note:

  • While a landline call is on hold, the SP-PHONE indicator flashes.
  • After holding for 10 minutes, the call is disconnected.

For models that start with KX-TGF54


Using the handset

  1. Press [ MENU ] during an outside call.
  2. Press the arrow up ▲ or down ▼ button to select "Hold"
  3. Press [ SELECT ].
  4. To release hold press the call call button icon button.
    • Another handset user can take the call by pressing the call call button icon button.
    • The base unit user can take the call by pressing the speakerphone SP-PHONE icon button.

Using the Base unit

  1. Press [ Hold ] during an outside call.
  2. To release hold press the speakerphone SP-PHONE icon button.
    • Another handset user can take the call by pressing call call button icon button.

Note:

  • While an outside call is on hold, the SP-PHONE indicator SP-PHONE icon on the base unit flashes.
  • After holding for 10 minutes, the call is disconnected.

For models that start with KX-TGF57


Using the handset

  1. Press [ MENU ] during an outside call.
  2. Press the arrow up ▲ or down ▼ button to select "Hold"
  3. Press [ SELECT ].
  4. To release hold on the cellular line: Press [ CELL ]
    • Another handset user can take the call by pressing [ CELL ]. If you press [ CELL ] and the selection list is displayed, select the desired cellular line and press [ SELECT ].
    • The base unit user can take the call by pressing [ CELL 1 ] or [ CELL 2 ].
  5. To release hold on the landline: Press the call call button icon button.
    • Another handset user can take the call by pressing the call call button icon button.
    • The base unit user can take the call by pressing the speakerphone SP-PHONE icon button.

Note: After holding for 10 minutes, the call is disconnected.


Base Unit

  1. Press [ Hold ] during an outside call.
  2. To release hold on the cellular line:
    Press [ CELL 1 ] or [ CELL 2 ].
    • A handset user can take the call: Press [ CELL ], then press the arrow up ▲ or down ▼ button to select the corresponding cellular phone. Press [ SELECT ].
      The call is taken in the following situations.
      • Only 1 cellular phone is paired.
      • A specific line is set to make cellular calls.
  3. To release hold on the landline: Press the speakerphone SP-PHONE icon button.
    • A handset user can take the call by pressing the call call button icon button.

Note:

  • While a landline call is on hold, the SP-PHONE indicator flashes.
  • After holding for 10 minutes, the call is disconnected.

For models that start with KX-TGF675


Using the handset

  1. Press [ MENU ] during an outside call.
  2. Press the arrow up ▲ or down ▼ button to select "Hold"
  3. Press [ SELECT ].
  4. To release hold on the cellular line: Press [ CELL ]
    • Another handset user can take the call by pressing [ CELL ]. If you press [ CELL ] and the selection list is displayed, select the desired cellular line and press [ SELECT ].
    • The base unit user can take the call by pressing [ CELL 1 ] or [ CELL 2 ].
  5. To release hold on the landline: Press the call call button icon button.
    • Another handset user can take the call by pressing the call call button icon button.
    • The base unit user can take the call by pressing the speakerphone SP-PHONE icon button.

Note: After holding for 10 minutes, the call is disconnected.


Base Unit

  1. Press [ Hold ] during an outside call.
  2. To release hold on the cellular line:
    Press [ CELL 1 ] or [ CELL 2 ].
    • A handset user can take the call: Press [ CELL ], then press the arrow up ▲ or down ▼ button to select the corresponding cellular phone. Press [ SELECT ].
      The call is taken in the following situations.
      • Only 1 cellular phone is paired.
      • A specific line is set to make cellular calls.
  3. To release hold on the landline: Press the speakerphone SP-PHONE icon button.
    • A handset user can take the call by pressing the call call button icon button.

Note:

  • While a landline call is on hold, the SP-PHONE indicator flashes.
  • After holding for 10 minutes, the call is disconnected.

For models that start with KX-TGF77


Using the handset

  1. Press [ MENU ] during an outside call.
  2. Press the arrow up ▲ or down ▼ button to select "Hold"
  3. Press [ SELECT ].
  4. To release hold on the cellular line: Press [ CELL ]
    • Another handset user can take the call by pressing [ CELL ]. If you press [ CELL ] and the selection list is displayed, select the desired cellular line and press [ SELECT ].
    • The base unit user can take the call by pressing [ CELL 1 ] or [ CELL 2 ].
  5. To release hold on the landline: Press the call call button icon button.
    • Another handset user can take the call by pressing the call call button icon button.
    • The base unit user can take the call by pressing the speakerphone SP-PHONE icon button.

Note: After holding for 10 minutes, the call is disconnected.


Base Unit

  1. Press [ Hold ] during an outside call.
  2. To release hold on the cellular line:
    Press [ CELL 1 ] or [ CELL 2 ].
    • A handset user can take the call: Press [ CELL ], then press the arrow up ▲ or down ▼ button to select the corresponding cellular phone. Press [ SELECT ].
      The call is taken in the following situations.
      • Only 1 cellular phone is paired.
      • A specific line is set to make cellular calls.
  3. To release hold on the landline: Press the speakerphone SP-PHONE icon button.
    • A handset user can take the call by pressing the call call button icon button.

Note:

  • While a landline call is on hold, the SP-PHONE indicator flashes.
  • After holding for 10 minutes, the call is disconnected.

For models that start with KX-TGF853, KX-TGF87


Using the handset

  1. Press [ MENU ] during an outside call.
  2. Press the arrow up ▲ or down ▼ button to select "Hold"
  3. Press [ SELECT ]. 
  4. To release hold press the call call button icon button.
    • Another handset user can take the call by pressing the call call button icon button.
    • The base unit user can take the call by lifting the corded handset.

Using the Base unit

  1. Press [ Hold ] during an outside call. If you are using the corded handset, you can place it on the cradle.
  2. To release hold lift the corded handset.
    • Another handset user can take the call by pressing call call button icon button.

Note:

  • While an outside call is on hold, the SP-PHONE indicator SP-PHONE icon on the base unit flashes.
  • After holding for 10 minutes, the call is disconnected.

For models that start with KX-TGF973


For models that start with KX-TGF975


Using the handset

  1. Press [ MENU ] during an outside call.
  2. Press the arrow up ▲ or down ▼ button to select "Hold"
  3. Press [ SELECT ].
  4. To release hold on the cellular line: Press [ CELL ]
    • Another handset user can take the call by pressing [ CELL ]. If you press [ CELL ] and the selection list is displayed, select the desired cellular line and press [ SELECT ].
    • The base unit user can take the call by pressing [ CELL 1 ] or [ CELL 2 ].
  5. To release hold on the landline: Press the call call button icon button.
    • Another handset user can take the call by pressing the call call button icon button.
    • The base unit user can take the call by pressing the speakerphone SP-PHONE icon button.

Note: After holding for 10 minutes, the call is disconnected.


Base Unit

  1. Press [ Hold ] during an outside call.
  2. To release hold on the cellular line:
    Press [ CELL 1 ] or [ CELL 2 ].
    • A handset user can take the call: Press [ CELL ], then press the arrow up ▲ or down ▼ button to select the corresponding cellular phone. Press [ SELECT ].
      The call is taken in the following situations.
      • Only 1 cellular phone is paired.
      • A specific line is set to make cellular calls.
  3. To release hold on the landline: Press the speakerphone SP-PHONE icon button.
    • A handset user can take the call by pressing the call call button icon button.

Note:

  • While a landline call is on hold, the SP-PHONE indicator flashes.
  • After holding for 10 minutes, the call is disconnected.

For models that start with KX-TGF944


For models that start with KX-TGH22


  1. Press [ MENU ] during an outside call.
  2. Press the arrow up ▲ or down ▼ button to select "Hold"
  3. Press [ SELECT ].
  4. To release hold press the call call button icon button.
  • After holding for 10 minutes, the call is disconnected.

For models that start with KX-TGH26


  1. Press [ MENU ] during an outside call.
  2. Press the arrow up ▲ or down ▼ button to select "Hold"
  3. Press [ SELECT ].
  4. To release hold on the cellular line: Press [ CELL ]
    • Another handset user can take the call by pressing [ CELL ]. If you press [ CELL ] and the selection list is displayed, select the desired cellular line and press [ SELECT ].
  5. To release hold on the landline: Press the call call button icon button.
    • Another handset user can take the call by pressing the call call button icon button.

Note: After holding for 10 minutes, the call is disconnected.

  1. Press [ MENU ] during an outside call.
  2. Press the arrow up ▲ or down ▼ button to select "Hold"
  3. Press [ SELECT ].
  4. To release hold press the call call button icon button.
    • Another handset user can take the call by pressing the call call button icon button.
  • After holding for 10 minutes, the call is disconnected.

For models that start with KX-TGL46


Using the handset

  1. Press [ MENU ] during an outside call.
  2. Press the arrow up ▲ or down ▼ button to select "Hold"
  3. Press [ SELECT ].
  4. To release hold on the cellular line: Press [ CELL ]
    • Another handset user can take the call by pressing [ CELL ]. If you press [ CELL ] and the selection list is displayed, select the desired cellular line and press [ SELECT ].
  5. To release hold on the landline: Press the call call button icon button.
    • Another handset user can take the call by pressing the call call button icon button.

Note: After holding for 10 minutes, the call is disconnected.

Model KX-TGM420


Using the handset

  1. Press [ MENU ] during an outside call.
  2. Press the arrow up ▲ or down ▼ button to select "Hold"
  3. Press [ SELECT ].
  4. To release hold press the [ TALK ] button.
    • Another handset user can take the call by pressing the call call button icon button.
    • The base unit user can take the call by pressing the speakerphone SP-PHONE icon button.

  • While an outside call is on hold, the SP-PHONE indicator SP-PHONE icon on the base unit flashes.
  • After holding for 10 minutes, the call is disconnected.

Model KX-TGM430


Using the handset

  1. Press [ MENU ] during an outside call.
  2. Press the arrow up ▲ or down ▼ button to select "Hold"
  3. Press [ SELECT ].
  4. To release hold on the cellular line: Press [ CELL ]
    • Another handset user can take the call by pressing [ CELL ]. If you press [ CELL ] and the selection list is displayed, select the desired cellular line and press [ SELECT ].
    • The base unit user can take the call by pressing [ CELL 1 ] or [ CELL 2 ].
  5. To release hold press the [ TALK ] button.
    • Another handset user can take the call by pressing the [ TALK ] button.
    • The base unit user can take the call by pressing the speakerphone SP-PHONE icon button.
  • While an outside call is on hold, the SP-PHONE indicator SP-PHONE icon on the base unit flashes.
  • After holding for 10 minutes, the call is disconnected.

Models KX-TGM450, KX-TGM470 or KX-TGM490


Using the handset

  1. Press [ MENU ] during an outside call.
  2. Press the arrow up ▲ or down ▼ button to select "Hold"
  3. Press [ SELECT ].
  4. To release hold press the [ TALK ] button.
    • Another handset user can take the call by pressing the call call button icon button.
    • The base unit user can take the call by pressing the speakerphone SP-PHONE icon button.

  • While an outside call is on hold, the SP-PHONE indicator SP-PHONE icon on the base unit flashes.
  • After holding for 10 minutes, the call is disconnected.
©2024 Panasonic USA All rights reserved.