How to register to the hub.

This procedure is not required for devices that were included as part of a bundle.

• Before you can use a smart plug it must be registered to the hub.
• If you purchased devices separately (i.e., not as part of a bundle), you must register each device to the hub.
• You can register each device by using the registration buttons or the "Home Network" app.

Using registration buttons

1. On the Hub, press and hold the registration button [] until the LED indicator blinks in green.
2. On the smart plug press and hold the registration button [] button until the LED indicator blinks in green.
3. When registration is complete, the hub sounds one long beep. If registration fails, the hub sounds several short beeps.

Using the app

1. Start the [Home Network] app.
2. From the [Home Network] app home screen, tap [Settings].
3. Tap [Device Registration].
4. Tap [Registration].
5. Select the type of device that you want to register.
6. Press and hold the registration button on the device you want to register until the device’s LED indicator blinks in green. When registration is complete, the hub sounds one long beep. If registration fails, the hub sounds several short beeps.
7. When prompted, configure the device name and location as desired, and then tap [OK].