How to reset a DVD player / recorder.
Factory reset
Follow this process to return all the settings to the factory presets to delete any user selected settings.
Model DMR-ES40
Reset the unit as follows:
- Press and hold [POWER] on the main unit for more than 10 seconds. The unit is forcibly switched to standby. Alternatively, disconnect the AC power supply cord, wait for about 1 minute, then reconnect it.
- Press the [ POWER] button to turn the unit on.
Model DMR-EZ47
Reset the unit as follows:
- Unit power must be on and unit must be in STOP mode.
- Press and hold the Channel up [ CH ▲ ] and Channel down [ CH ▼ ] buttons on the unit for over five seconds. The unit will turn off.
- Press the [ POWER ] button to turn the unit on.
Model DMR-EZ475
Model DMR-EZ48
Model DMR-EZ485
Model DVD-S38
Reset the unit as follows:
- Press the [ SETUP ] button.
- Press the arrow up ▲ or down ▼ button to select " OTHER ".
- Press the arrow right ►.
- Press the arrow up ▲ or down ▼ button to select " Password ".
- Press the arrow right ►.
- Use the numeric keypad (0-9) to enter the four-digit password, then press [ OK ].
- Press the arrow down ▼ to select " Default " then press the arrow right ► to select " Restore ".
- Press [ OK ] to confirm.
Note: The default password is 0000.
Model DVD-S48
Reset the unit as follows:
- Press [ POWER ] on the DVD player to turn it on.
- Press [ OPEN/CLOSE ] to open the disc tray.
- Press and hold [ n ] and [ ► ] on the DVD player at the same time for more than 5 seconds with the tray open.
Model DVD-S58
Model DVD-S59
Model DVD-S68
Model DVD-S700
Reset the unit as follows:
- Press the [POWER] button on the DVD player to turn it on.
- Press the [OPEN/CLOSE] button to open the disc tray.
- Press the number button “ 5 ” on the remote control 4 times. (The power is automatically turned off.) All the settings return to the factory preset.