How to return all settings to the factory preset - Blu-ray

The programming steps to reset a Blu-ray player varies by model. Select your model from the drop down list below for specific programming or if your model is not listed Refer to your models Operating Manual for the specific procedure.

Select a model then press "Confirm".

---

Model DMP-BBT01

Reset the unit as follows:

1. Turn the unit off.
2. Press and hold the [B] and [Y] buttons on the remote at the same time for more than 5 seconds. The STATUS and INFO LEDs start to flash.
3. Press the [R] button repeatedly until the CALL LED lights up and the ACCESS LED flashes.
   
   
4. Press and hold the [G] button for more than 3 seconds.

Model DMP-BD45

Reset the unit as follows:

1. Turn the unit off.
2. Press and hold the [OK], [Y] and [B] buttons on the remote at the same time for more than 5 seconds. “00 RET” is displayed on the unit’s display.
3. Press the arrow right ► button repeatedly on the remote control or the [POWER] on the unit until “08 FIN” is displayed on the unit’s display.
4. Press and hold the [OK] button on the remote control or the [OPEN/CLOSE] on the unit for more than 3 seconds.

Model DMP-BD65, DMP-BD655

Reset the unit as follows:

1. Turn the unit off.
2. Press and hold the [OK], [Y] and [B] buttons on the remote at the same time for more than 5 seconds. “00 RET” is displayed on the unit’s display.
3. Press the arrow right ► button repeatedly on the remote control or the [POWER] on the unit until “08 FIN” is displayed on the unit’s display.
4. Press and hold the [OK] button on the remote control or the [OPEN/CLOSE] on the unit for more than 3 seconds.

Model DMP-BD77, DMP-BD79

Reset the unit as follows:

1. Turn the unit on.
2. Press and hold the [OK], [Y] and [B] buttons on the remote at the same time for more than 5 seconds. “00 RET” is displayed on the unit’s display.
3. Press the arrow right ► button repeatedly on the remote control until “08 FIN” is displayed on the unit’s display.
4. Press and hold the [OK] button on the remote control for more than 5 seconds.

Model DMP-BD81

Reset the unit as follows:

1. Turn the unit on.
2. Press and hold the [OK], [Y] and [B] buttons on the remote at the same time for more than 5 seconds. “00 RET” is displayed on the unit’s display.
3. Press the arrow right ► button repeatedly on the remote control until “08 FIN” is displayed on the unit’s display.
4. Press and hold the [OK] button on the remote control for more than 5 seconds.

Model DMP-BD85

Reset the unit as follows:

1. Turn the unit off.
2. Press and hold the [OK], [Y] and [B] buttons on the remote at the same time for more than 5 seconds. “00 RET” is displayed on the unit’s display.
3. Press the arrow right ► button repeatedly on the remote control or the [POWER] on the unit until “08 FIN” is displayed on the unit’s display.
4. Press and hold the [OK] button on the remote control or the [OPEN/CLOSE] on the unit for more than 3 seconds.

Model DMP-BD87, DMP-BD89

Reset the unit as follows:

1. Turn the unit on.
2. Press and hold the [OK], [Y] and [B] buttons on the remote at the same time for more than 5 seconds. “00 RET” is displayed on the unit’s display.
3. Press the arrow right ► button repeatedly on the remote control until “08 FIN” is displayed on the unit’s display.
4. Press and hold the [OK] button on the remote control for more than 5 seconds.

Model DMP-BD90, DMP-BD84

Reset the unit as follows:

1. While the unit is on Press and hold open close tray button on the main unit and the [0] on the remote control at the same time for more than 5 seconds.
   • POWER LED starts to flash, and “00 RET” is displayed on the screen.
2. Press [►] (right) repeatedly on the remote control until “08 FIN” is displayed on the screen.
3. Press and hold [OK] for more than 5 seconds.

Model DMP-BD901, DMP-BD903

Reset the unit as follows:

1. Turn the unit on.
2. Press and hold the [OK], [Y] and [B] buttons on the remote at the same time for more than 5 seconds. “00 RET” is displayed on the unit’s display.
3. Press the arrow right ► button repeatedly on the remote control until “08 FIN” is displayed on the unit’s display.
4. Press and hold the [OK] button on the remote control for more than 5 seconds.

Model DMP-BD91, DMP-BD93, DMP-BD94

Reset the unit as follows:

1. Turn the unit off.
2. Press and hold the [OK], [Y] and [B] buttons on the remote at the same time for more than 5 seconds. “00 RET” is displayed on the unit’s display.
3. Press the arrow right ► button repeatedly on the remote control until “08 FIN” is displayed on the unit’s display.
4. Press and hold the [OK] button on the remote control for more than 5 seconds.

Model DMP-BDT100, DMP-BDT110

Reset the unit as follows:

1. Turn the unit off.
2. Press and hold the [OK], [Y] and [B] buttons on the remote at the same time for more than 5 seconds. “00 RET” is displayed on the unit’s display.
3. Press the arrow right ► button repeatedly on the remote control or the [POWER] on the unit until “08 FIN” is displayed on the unit’s display.
4. Press and hold the [OK] button on the remote control or the [OPEN/CLOSE] on the unit for more than 3 seconds.

Model DMP-BDT210, DMP-BDT220

Reset the unit as follows:

1. Turn the unit off.
2. Press and hold the [OK], [Y] and [B] buttons on the remote at the same time for more than 5 seconds. “00 RET” is displayed on the unit’s display.
3. Press the arrow right ► button repeatedly on the remote control or the [POWER] on the unit until “08 FIN” is displayed on the unit’s display.
4. Press and hold the [OK] button on the remote control or the [OPEN/CLOSE] on the unit for more than 3 seconds.

Model DMP-BDT230

Reset the unit as follows:

1. Turn the unit off.
2. Press and hold the [OK], [Y] and [B] buttons on the remote at the same time for more than 5 seconds. “00 RET” is displayed on the unit’s display.
3. Press the arrow right ► button repeatedly on the remote control until “08 FIN” is displayed on the unit’s display.
4. Press and hold the [OK] button on the remote control for more than 5 seconds.

Model DMP-BDT270, DMP-BDT271

Reset the unit as follows:

1. Turn the unit on.
2. Press and hold the [OK], [Y] and [B] buttons on the remote at the same time for more than 5 seconds. “00 RET” is displayed on the unit’s display.
3. Press the arrow right ► button repeatedly on the remote control until “08 FIN” is displayed on the unit’s display.
4. Press and hold the [OK] button on the remote control for more than 5 seconds.

Model DMP-BDT280

Reset the unit as follows:

1. Turn the unit off.
2. Press and hold the [OK], [Y] and [B] buttons on the remote at the same time for more than 5 seconds. “00 RET” is displayed on the unit’s display.
3. Press the arrow right ► button repeatedly on the remote control until “08 FIN” is displayed on the unit’s display.
4. Press and hold the [OK] button on the remote control for more than 5 seconds.

Model DMP-BDT300, DMP-BDT310

Reset the unit as follows:

1. Turn the unit off.
2. Press and hold the [OK], [Y] and [B] buttons on the remote at the same time for more than 5 seconds. “00 RET” is displayed on the unit’s display.
3. Press the arrow right ► button repeatedly on the remote control or the [POWER] on the unit until “08 FIN” is displayed on the unit’s display.
4. Press and hold the [OK] button on the remote control or the [OPEN/CLOSE] on the unit for more than 3 seconds.

Model DMP-BDT320

Reset the unit as follows:

1. Turn the unit off.
2. Press and hold the [Y] and [B] buttons on the remote at the same time for more than 5 seconds. “00 RET” is displayed on the unit’s display.
3. Press the [R] button repeatedly on the remote control until “08 FIN” is displayed on the unit’s display.
4. Press and hold the [G] button on the remote control or the [OPEN/CLOSE] on the unit for more than 3 seconds.

Model DMP-BDT330

Reset the unit as follows:

1. Turn the unit off.
2. Press and hold the [OK], [Y] and [B] buttons on the remote at the same time for more than 5 seconds. “00 RET” is displayed on the unit’s display.
3. Press the arrow right ► button repeatedly on the remote control until “08 FIN” is displayed on the unit’s display.
4. Press and hold the [OK] button on the remote control for more than 5 seconds.

Model DMP-BDT350

Reset the unit as follows:

1. Turn the unit off.
2. Press and hold the [OK], [Y] and [B] buttons on the remote at the same time for more than 5 seconds. “00 RET” is displayed on the unit’s display.
3. Press the arrow right ► button repeatedly on the remote control or the [POWER] on the unit until “08 FIN” is displayed on the unit’s display.
4. Press and hold the [OK] button on the remote control or the [OPEN/CLOSE] on the unit for more than 3 seconds.

Model DMP-BDT360

Reset the unit as follows:

1. Turn the unit off.
2. Press and hold the [OK], [Y] and [B] buttons on the remote at the same time for more than 5 seconds. “00 RET” is displayed on the unit’s display.
3. Press the arrow right ► button repeatedly on the remote control until “08 FIN” is displayed on the unit’s display.
4. Press and hold the [OK] button on the remote control for more than 5 seconds.

Model DMP-BDT460

Reset the unit as follows:

1. Turn the unit off.
2. Press and hold the [OK], [Y] and [B] buttons on the remote at the same time for more than 5 seconds. “00 RET” is displayed on the unit’s display.
3. Press the arrow right ► button repeatedly on the remote control until “08 FIN” is displayed on the unit’s display.
4. Press and hold the [OK] button on the remote control for more than 5 seconds.

Model DMP-BDT500

Reset the unit as follows:

1. Turn the unit off.
2. Press and hold the [Y] and [B] buttons on the remote at the same time for more than 5 seconds. “00 RET” is displayed on the unit’s display.
3. Press the [R] button repeatedly on the remote control until “08 FIN” is displayed on the unit’s display.
4. Press and hold the [G] button on the remote control for more than 3 seconds.

Model DMP-UB200, DMP-UB300

Reset the unit as follows:

1. Turn the unit on.
2. Press and hold the [OK], [Y] and [B] buttons on the remote at the same time for more than 5 seconds. “00 RET” is displayed on the unit’s display.
3. Press the arrow right ► button repeatedly on the remote control until “08 FIN” is displayed on the unit’s display.
4. Press and hold the [OK] button on the remote control for more than 5 seconds.

Model DMP-UB400, DMP-UB420

Reset the unit as follows:

1. Turn the unit on.
2. Press and hold the [OK], [Y] and [B] buttons on the remote at the same time for more than 5 seconds. “00 RET” is displayed on the unit’s display.
3. Press the arrow right ► button repeatedly on the remote control until “08 FIN” is displayed on the unit’s display.
4. Press and hold the [OK] button on the remote control for more than 5 seconds.

Model DMP-UB900

Reset the unit as follows:

1. Turn the unit off.
2. Press and hold the [OK], [Y] and [B] buttons on the remote at the same time for more than 5 seconds. “00 RET” is displayed on the unit’s display.
3. Press the arrow right ► button repeatedly on the remote control until “08 FIN” is displayed on the unit’s display.
4. Press and hold the [OK] button on the remote control for more than 5 seconds.

Model DP-UB150, DP-UB154

Reset the unit as follows:

1. Turn the unit on.
2. Press and hold the [OPEN/CLOSE] button on the main unit and the [0] button on the remote control at the same time for more than 5 seconds. “00 RET” is displayed on the unit’s display.
3. Press the arrow right ► button repeatedly on the remote control until “08 FIN” is displayed on the unit’s display.
4. Press and hold the [OK] button on the remote control for more than 5 seconds.

Model DP-UB820

Reset the unit as follows:

1. Turn the unit off.
2. Press and hold the [OK], [Y] and [B] buttons on the remote at the same time for more than 5 seconds. “00 RET” is displayed on the unit’s display.
3. Press the arrow right ► button repeatedly on the remote control until “08 FIN” is displayed on the unit’s display.
4. Press and hold the [OK] button on the remote control for more than 5 seconds.

Model DP-UB9000

Reset the unit as follows:

1. Turn the unit off.
2. Press and hold the [OK], [Y] and [B] buttons on the remote at the same time for more than 5 seconds. “00 RET” is displayed on the unit’s display.
3. Press the arrow right ► button repeatedly on the remote control until “08 FIN” is displayed on the unit’s display.
4. Press and hold the [OK] button on the remote control for more than 5 seconds.