How to set a delayed start.
Warning
Your microwave oven is a cooking appliance and you should use
as much care as you use with a stove or any other cooking
appliance. DO NOT leave the oven unattended while in use.
- Press [Timer] or
[Cooking Timer] or
[Timer (More)] or
[Timer/Clock] or
[Timer/Clock/Less].
- Press button according to your model/control panel.
Image varies by model.Refer to your models Operating Manual for specific information.
- Press button according to your model/control panel.
- Enter the desired delay time using the Number pads.
- The maximum programmable time is 99 minutes, 99
seconds.
Image varies by model.Refer to your models Operating Manual for specific information.
- The maximum programmable time is 99 minutes, 99
seconds.
- Press [Power Level]
until the desired power level appears in the display.
- P10/PL10 is the highest level and P1/PL1 is the lowest level.
- For model NN-ST74, NN-ST75, NN-ST77, NN-ST96JS,
NN-ST99JS: P0 (KEEP WARM) is the lowest level.
Image varies by model.Refer to your models Operating Manual for specific information.
Different Power Levels Press Power Level For model NN-SC73LS
Power LevelOnce P10 (HIGH) PL10(HIGH) Twice P9 PL9 times P8 PL8 4 times P7 (MEDIUM-HIGH) PL7(MEDIUM-HIGH) 5 times P6 (MEDIUM) PL6 (MEDIUM) 6 times P5 PL5 7 times P4 PL4 8 times P3 (MEDIUM-LOW)/DEFROST PL3(MEDIUM-LOW)/DEFROST 9 times P2 PL2 10 times P1 (LOW) PL1(LOW) 11 times P0 (KEEP WARM) Only models NN-ST74, NN-ST75,
NN-ST77, NN-ST96JS, NN-ST99JS--
- Set Cooking Time using the
Number pads.
Image varies by model.Refer to your models Operating Manual for specific information.
- Press [Start].
- The delay time will count down, then cooking will begin.
- For NN-SB55, NN-SC73LS, NN-SU65, NN-SU66 at the
end of cooking, five beeps will sound.
Image varies by model.Refer to your models Operating Manual for specific image
Note:
- When each stage finishes, the oven will beep twice. At the end of the program, the oven will beep five times.
- If the oven door is opened during Stand Time, Kitchen Timer or Delay Time, the time on the display will continue to count down.
- Stand Time and Delay start cannot be programmed before any automatic function (such as sensor cook/reheat, popcorn and inverter turbo defrost, Cofee/Milk, Frozen Foods). This is to prevent the starting temperature of food from rising. A change in starting temperature could cause inaccurate results.
- When selecting P10 (HIGH) power, the maximum programmable time is 30 minutes. For other power levels, the maximum time is 99 minutes and 99 seconds.
- For reheating, use P10 (HIGH) for liquids, P7 (MEDIUM-HIGH) for most foods and P6 (MEDIUM) for dense foods.
- For defrosting, use P3 (MEDIUM-LOW). see defrosting tips and techniques.
- If oven lamp is lit while using the timer feature, the oven is NOT set properly; STOP OVEN IMMEDIATELY and re-follow the instructions above.
- The Standing time or Delay start feature can only be added to a 2-cycle (power stages) cooking sequence.
- For models NN-SN686, NN-SN736, NN-SN936, NN-SN946, NN-ST66, NN-ST67KS, NN-ST96JS: When using Standing time or Delay Start, it's up to 2 power stages.
- For NN-SU65, NN stage cooking can be programmed including Standing Time and Delay Start.
This answer applies to the following models: NN-SB428, NN-SB448, N-SB438S, NN-SB458S, NN-SB646, NN-SB55LS, NN-SB558LS, NN-SC73LS, NN-SC678S, NN-SC688S,NN-SC668S, NN-SC669S, NN-SC73LS, NN-SG428, NN-SG448S, NN-SG458, NN-SG616B, NN-SG626, NN-SG636S, NN-SG636W, NN-SG656S, NN-SG656W, NN-SN65KB, NN-SN65KW, NN-SN66KB, NN-SN67KS, NN-SN648, NN-SN686, NN-SN736, NN-SN744, NN-SN778, NN-SN936, NN-SN946, NN-ST27HW, NN-ST27HB, NN-ST66, NN-ST67KS, NN-ST74, NN-ST75, NN-ST77, NN-ST96JS, NN-ST99JS, NN-ST661, NN-ST676, NN-ST681, NN-ST696, NN-ST765S, NN-ST766, NN-ST775S, NN-ST785S, NN-ST975S, NN-ST966, NN-SU656, NN-SU676, NN-SU686, NN-SU696, NN-T765, NN-T775, NN-T945, NN-T955.