How to set a Delayed Start. - NN-CD series

Warning


Your microwave oven is a cooking appliance and you should use as much care as you use with a stove or any other cooking appliance. DO NOT leave the oven unattended while in use.


The start time can be delayed to start cooking at a later time.

  1. To do this, first press [Timer/Clock] once.
  2. Set the desired delay time by turning the dial (up to 1 hour and 30 minutes).
  3. Press [Microwave] until the desired power level appears in the display. 1000W is the highest and 100W is the lowest.
  4. Set cooking time by turning the [Start/Select] dial (maximum cooking time is 1 hour and 30 minutes)
  5. Press [Start/Select] (dial), the delay time will count down, then cooking will begin.

Notes:

  • If the oven door is opened during Kitchen Timer, Standing Time, Delay Start, the time in the display window will continue to count down.
  • Standing Time and Delay Start can not be programmed together with auto programs (such as Defrost, Sensor Reheat, Auto/Sensor Cook and Steam Clean) and preheating. This is to prevent the starting temperature of food from rising before defrosting or cooking begins. A change is starting temperature could cause inaccurate results.
  • When using Standing Time or Delay Start, it is up to 2 power stages.
  • If the time exceeds one hour, it will count down in units of minutes. If less than one hour, the time will count down in units of seconds.
  • An “H” will appear in the display to denote hours.
©2024 Panasonic USA All rights reserved.

Our website uses cookies and similar tools to improve its performance and enhance your online user experience. By continuing to use this website without changing your settings, you consent to their use.