How to set a standing time.

Some recipes call for a standing time after cooking. After you have programmed the cooking power level and time, program the standing time.


The following answer applies to most Microwave Models. If your model is not listed For more information refer to the operating instructions for your model.




Model NN-CF876


  1. Press [Micro PowerMicro Power].
  2. Set cooking time, tapping [+] / [-] or swipe the slider bar to 3 minutes.
  3. Touch [Timer clock] once.
  4. Set stand time, tapping [+] / [-] or swipe the slider bar to 5 minutes.
  5. Press [Start].
    Cooking will start. after cooking, stand time will count down without oven operating.

Model NN-CD65NS


Model NN-CD66NS


Model NN-CD87K


Some recipes call for a standing time after cooking.

  1. Press [Microwave] until the desired power level appears in the display. 1000W is the highest and 100W is the lowest have a max cooking time of 30 minutes. For other power levels, the max. time is 1 hour and 30 minutes.
  2. Set cooking time by turning the [Start/Select] dial.
  3. Press [Timer/Clock] once.
  4. Set desired standing time by turning the dial (up to 1 hour and 30 minutes).
  5. Press [Start/Select] (dial). Cooking will begin. After cooking, standing time will count down without oven operating. 

Notes

  • If the oven door is opened during Kitchen Timer, Standing Time, Delay Start, the time in the display window will continue to count down.
  • Standing Time and Delay Start can not be programmed together with auto programs (such as Defrost, Sensor Reheat, Auto/Sensor Cook and Steam Clean) and preheating.
    This is to prevent the starting temperature of food from rising before defrosting or cooking begins. A change is starting temperature could cause inaccurate results.
  • When using Standing  or Delay Start, it is up to 2 power stages. 
  • If the time exceeds one hour, it will count down in units of minutes. If less than one hour, the time will count down in units of seconds.
  • An “H” will appear in the display to denote hours.

Model NN-CS89


  1. Press [Micro PowerMicro Power].
  2. Set cooking time, tapping [] / [] or swipe the slider bar to 3 minutes.
  3. Touch [Timer clockTimer/Clock] once.
  4. Set stand time, tapping [] / [] or swipe the slider bar to 5 minutes.
  5. Press [Start].
    Cooking will start. after cooking, stand time will count down without oven operating.

Model NN-CS896


  1. Press [Micro PowerMicro Power].
  2. Set cooking time, tapping [+] / [-] or swipe the slider bar to 3 minutes.
  3. Touch [Timer clockTimer/Clock] once.
  4. Set stand time, tapping [+] / [-] or swipe the slider bar to 5 minutes.
  5. Press [Start].
    Cooking will start. after cooking, stand time will count down without oven operating.

Model NN-DS58


  1. Set the desired cooking program, by entering cooking method and time required.(up to 2 power stages)
  2. Press micro power until the power you require appears in the display window.

  3. Power Level Options
    Touch micro power Power Level
    Once 1000 W (High)
    Twice 800 W (Med-High)
    3 Times 600 W (Medium)
    4 Times 440 W (Med-Low)
    5 Times 300 W (Defrost)
    6 Times 100 W (Low)
    7 Times 300 W (300 W + Steam)

  4. Touch Timer clock timer symbol once.
  5. Set the standing time by turning the Time/Weight dial. (up to 1 hour 30 minutes)
  6. Touch start symbol once. Cooking will start. After cooking, standing time will count down without oven operating.

Notes:

  1. If the oven door is opened during Kitchen Timer, Standing Time, Delay Start, the time in the display window will continue to count down.
  2. Standing Time and Delay Start can not be programmed together with automatic, Oven and Crispy Grill feature. This is to prevent the starting temperature of food from rising before defrosting or cooking begins. A change is starting temperature could cause inaccurate results.
  3. When using Standing time or Delay Start, it’s up to 2 power stages.
  4. If the programmed stand time exceeds one hour, the time will count down in units of minutes. If less than one hour, the time will count down in units of seconds.
  5. Standing time may also be used as a minute timer. In this case touch the Timer/Clock, set time and touch Start

Model NN-DS59


  1. Set the desired cooking program, by entering cooking method and time required.(up to 2 power stages)
  2. Press
    1. Press Microwave power level until the desired power level appears in the display window.

    2. Power Level Options
      Touch micro power Power Level
      Once 1000 W (High)
      Twice 800 W (Med-High)
      3 Times 600 W (Medium)
      4 Times 440 W (Med-Low)
      5 Times 300 W (Defrost)
      6 Times 100 W (Low)
      7 Times KEEP WARM

    3. Touch TimerClock timer symbol once.
    4. Set the standing time by turning the Time Weight dial. (up to 1 hour 30 minutes)
    5. Touch start symbol once. Cooking will start. After cooking, standing time will count down without oven operating.

    Notes:

    1. If the oven door is opened during Kitchen Timer, Standing Time, Delay Start, the time in the display window will continue to count down.
    2. Standing Time and Delay Start can not be programmed together with automatic, Oven and Crispy Grill feature. This is to prevent the starting temperature of food from rising before defrosting or cooking begins. A change is starting temperature could cause inaccurate results.
    3. When using Standing time or Delay Start, it’s up to 2 power stages.
    4. If the programmed stand time exceeds one hour, the time will count down in units of minutes. If less than one hour, the time will count down in units of seconds.
    5. Standing time may also be used as a minute timer. In this case touch the Timer/Clock, set time and touch Start

Model NN-GN68KS


Some recipes call for a standing time after cooking. After you have programmed the cooking power level and time, program the standing time.


  1. Press [Power level] to enter the desired Power level.
    • Power level P10 is the highest and P1 is the lowest.
  2. Set the cooking time, using the time buttons.
  3. Set the stand time, using the Time buttons (10 min, 1 min, 10 sec). (up to 99 minutes and 50 seconds)
  4. Press [Start].
    • Cooking will start. After cooking, stand time will count down without oven operating.

Model NN-GT69


Model NN-H765, NN-H965


Model NN-SA631


Some recipes call for a standing time after cooking. After you have programmed the cooking power level and time, program the standing time.


  1. Press [Power level] to enter the desired Power level.
    • Power level P10 is the highest and P1 is the lowest.
  2. Set the cooking time, using the number pads.
  3. Press [Timer/Clock], [Timer], [Cooking Timer], or [Timer (More)] once.
    • Press the button according to your model. 
       
  4. Set the stand time, using the number pads. (up to 99 minutes and 99 seconds)
  5. Press [Start].
    • Cooking will start. After cooking, stand time will count down without oven operating.

Model NN-SA651

Some recipes call for a standing time after cooking. After you have programmed the cooking power level and time, program the standing time.


  1. Press [Power level] to enter the desired Power level.
    • Power level P10 is the highest and P1 is the lowest.
  2. Set the cooking time, using the number pads.
  3. Press [Timer/Clock], [Timer], [Cooking Timer], or [Timer (More)] once.
    • Press the button according to your model. 
       
  4. Set the stand time, using the number pads. (up to 99 minutes and 99 seconds)
  5. Press [Start].
    • Cooking will start. After cooking, stand time will count down without oven operating.

Model NN-SB428, NN-SB438, NN-SB448, NN-SB458

Model NN-SB55

Some recipes call for a standing time after cooking. After you have programmed the cooking power level and time, program the standing time.


  1. Press [Power level] to enter the desired Power level.
    • Power level P10 is the highest and P1 is the lowest.
  2. Set the cooking time, using the number pads.
  3. Press Timer] once.
    • Press the button according to your model. 
       
  4. Set the stand time, using the number pads. (up to 99 minutes and 99 seconds)
  5. Press [Start].
    • Cooking will start. After cooking, stand time will count down without oven operating.

Model NN-SB646

Some recipes call for a standing time after cooking. After you have programmed the cooking power level and time, program the standing time.


  1. Press [Power level] to enter the desired Power level.
    • Power level P10 is the highest and P1 is the lowest.
  2. Set the cooking time, using the number pads.
  3. Press [Timer/Clock], [Timer], [Cooking Timer], or [Timer (More)] once.
    • Press the button according to your model. 
       
  4. Set the stand time, using the number pads. (up to 99 minutes and 99 seconds)
  5. Press [Start].
    • Cooking will start. After cooking, stand time will count down without oven operating.

Model NN-SB65NS

Model NN-SB658S

Some recipes call for a standing time after cooking. After you have programmed the cooking power level and time, program the standing time.


  1. Press [Power level] to enter the desired Power level.
    • Power level PL10 is the highest and PL1 is the lowest.

      null
  2. Set the cooking time, using the Time pads. ([5 MIN], [1 MIN] or [10SEC])

    null
     
  3. Press [Cooking Timer] once.
    • Press the button according to your model. 
       
  4. Set the stand time, using the Time pads. (up to 99 minutes and 50 seconds)
     
  5. Press [Start].
    Cooking will start. After cooking, stand time will count down without oven operating.


Some recipes call for a standing time after cooking.

  1. Press [Power level] to enter the desired Power level.
    • Power level P10 is the highest and P1 is the lowest.
  2. Set the cooking time, using the number pads.
  3. Press [Timer/Clock] once.
  4. Set the stand time, using the number pads. (up to 99 minutes and 99 seconds)
  5. Press [Start].
    • Cooking will start. After cooking, stand time will count down without oven operating.


Some recipes call for a standing time after cooking. After you have programmed the cooking power level and time, program the standing time.


  1. Press [Power level] to enter the desired Power level.
    • Power level P10 is the highest and P1 is the lowest.
  2. Set the cooking time, using the number pads.
  3. Press [Timer/Clock], [Timer], [Cooking Timer], or [Timer (More)] once.
    • Press the button according to your model. 
       
  4. Set the stand time, using the number pads. (up to 99 minutes and 99 seconds)
  5. Press [Start].
    • Cooking will start. After cooking, stand time will count down without oven operating.

Model NN-SC669, NN-SC678, NN-SC688


Model NN-SC67NS


Model NN-SC73LS


Some recipes call for a standing time after cooking.

  1. Press [Power level] to enter the desired Power level.
    • Power level P10 is the highest and P1 is the lowest.
  2. Set the cooking time, using the number pads.
  3. Press [Timer] once.
  4. Set the stand time, using the number pads. (up to 99 minutes and 99 seconds)
  5. Press [Start].
    • Cooking will start. After cooking, stand time will count down without oven operating.

Note : Do not skip step 1, even if using high power PL10.

Model NN-SD291


  1. Press [Power level] until the desired power level appears in the display window.
  2. Set Cooking Time, turning [Time] Dial.
  3. Press [Timer/Clock] once.
  4. Set stand time, using [Time] Dial.
  5. Press [Start].
    Cooking will start. The time in the display window will count down.

Model NN-SD372


Model NN-SD654


Model NN-SD65LS


Model NN-SD66LS


Some recipes call for a standing time after cooking. After you have programmed the cooking power level and time, program the standing time.


  1. Press [Power level] to enter the desired Power level. P10 is the highest and P1 is the lowest.

  2. Set the cooking time by turning the [Weight/Time] dial.
    • Use the button according to your model.

  3. Press [Cooking Timer/Clock] once.
    • Use the button according to your model.

  4. Set the stand time by turning [Weight/Time] dial.(up to 90 minutes)
    • Use the button according to your model.

  5. Press [Start] dial.
    Cooking will start. After cooking, stand time will count down without oven operating.

Model NN-SD664


  1. Press [Power level] until the desired power level appears in the display window.
  2. Set Cooking Time, turning [Time] Dial.
  3. Press [Timer] once.
  4. Set stand time, using Time Select Dial to 5 minutes.
  5. Press [Start].
    Cooking will start. The time in the display window will count down.

Model NN-SD67LS


Some recipes call for a standing time after cooking. After you have programmed the cooking power level and time, program the standing time.


  1. Press [Power level] to enter the desired Power level. P10 is the highest and P1 is the lowest.

  2. Set the cooking time by turning the [Start] dial.
    • Use the button according to your model.

  3. Press [Cooking Timer/Clock]] once.
    • Use the button according to your model.

  4. Set the stand time by turning [Start] dial.(up to 90 minutes)
    • Use the button according to your model.

  5. Press [Start] button or [Start] dial.
    Cooking will start. After cooking, stand time will count down without oven operating.

Model NN-SD67NS


  1. Press [Power level] until the desired power level appears in the display window.
  2. Set Cooking Time, using [Time/Weight/Sensor Menu Dial].
  3. Press [Timer] once.
    Note: Do not skip step 1, even use high power PL10
  4. Set stand time by turning [Time/Weight/Sensor Menu] Dial (up to 99 minutes, 99 seconds.)
  5. Press [Start] The timer will start and then beep twice at the end of cooking time (the beginning of standing time). Five beeps will sound when standing time is done.

Note:


  • When each stage finishes, the oven will beep twice. At the end of the program, the oven will beep five times.
  • If the oven door is opened during Stand Time, Kitchen Timer or Delay Time, the time on the display will continue to count down.
  • Stand Time and Delay start cannot be programmed before any automatic function. This is to prevent the starting temperature of food from rising

Model NN-SD671


  1. Press [Power level] until the desired power level appears in the display window.
  2. Set Cooking Time, using [Time/Weight Dial].
  3. Press [Timer] once.
  4. Set stand time, using [Time/Weight] Dial to 5 minutes.
  5. Press [Start].
    Cooking will start. The time in the display window will count down.

Model NN-SD681


Model NN-SD68LS


Model NN-SD69LS


Some recipes call for a standing time after cooking. After you have programmed the cooking power level and time, program the standing time.


  1. Press [Power level] to enter the desired Power level. P10 is the highest and P1 is the lowest.

  2. Set the cooking time by turning the [Time] or [Start] dial.
    • Use the button according to your model.

  3. Press [Timer/Clock] or [Cooking Timer/Clock] once.
    • Use the button according to your model.

  4. Set the stand time by turning [Time] or [Start] dial.(up to 90 minutes)
    • Use the button according to your model.

  5. Press [Start] button or [Start] dial.
    Cooking will start. After cooking, stand time will count down without oven operating.

Model NN-SD745


Model NN-SD755, NN-SD765


Model NN-SD762


Some recipes call for a standing time after cooking. After you have programmed the cooking power level and time, program the standing time.

  1. Press [Power level] to enter the desired Power level. P10 is the highest and P1 is the lowest.
    • P10 and P1 have a max. cooking time of 30 minutes.
    • The lowest power level is P1 which has a max. Cooking time of 1 minute and 30 seconds.
       
  2. Set the cooking time using the [Time/Weight] dial.
     
  3. Press [Timer/Clock] once.
     
  4. Set the stand time using the [Time/Weight] dial.(up to 99 minutes and 99 seconds)
    • Time can go up to 90 minutes.
       
  5. Press [Start].
    • The timer will start. After cooking ends 2 beeps will sound (which is the begining of standing time), Stand time will count down without oven operating and 5 beeps will sound when standing time is done.

Model NN-SD775


Model NN-SD78LS


Some recipes call for a standing time after cooking. After you have programmed the cooking power level and time, program the standing time.

  1. Press [Power level] to enter the desired Power level. P10 is the highest and P1 is the lowest.
    • P10 and P1 have a max. cooking time of 30 minutes.
    • The lowest power level is P0 (KEEP WARM) which has a max. Cooking time of 30 minutes.
       
  2. Set the cooking time using the [Time/Weight] dial.
     
  3. Press [Timer/Clock] once.
     
  4. Set the stand time using the [Time/Weight] dial.(up to 99 minutes and 99 seconds)
    • Time can go up to 90 minutes.
       
  5. Press [Start].
    • The timer will start. After cooking ends 2 beeps will sound (which is the begining of standing time), Stand time will count down without oven operating and 5 beeps will sound when standing time is done.

Model NN-SD786


Model NN-SD787, NN-SD797


Model NN-SD945


Model NN-SD962


Model NN-SD965


Model NN-SD972


Model NN-SD975


Model NN-SD986


Model NN-SD987, NN-SD997


Model NN-SE284


  1. Press [Power Level].
  2. Set cooking time, tapping [+] / [-] or swipe the slider bar to 3 minutes.
  3. Touch [Timer/Clock] once.
  4. Set stand time, tapping [+] / [-] or swipe the slider bar to 5 minutes.
  5. Press [Start].
    Cooking will start. after cooking, stand time will count down without oven operating.

Model NN-SE785


  1. Press [Power Level].
  2. Set cooking time, tapping [+] / [-] or swipe the slider bar to 3 minutes.
  3. Touch [Timer] once.
  4. Set stand time, tapping [+] / [-] or swipe the slider bar to 5 minutes.
  5. Press [Start].
    Cooking will start. after cooking, stand time will count down without oven operating.

Model NN-SE795


Model NN-SE796


Model NN-SE985


Model NN-SE995


Model NN-SE796


Model NN-SG428, NN-SG458


Model NN-SG448


Model NN-SG616, NN-SG626, NN-SG636, NN-SG656


Some recipes call for a standing time after cooking. After you have programmed the cooking power level and time, program the standing time.


  1. Press [Power level] to enter the desired Power level. P10 is the highest and P1 is the lowest.

  2. Set the cooking time by pressing the number pads.
  3. Press [Timer] once.
  4. Set the stand time Number pads (up to 99 minutes, 99 seconds).
  5. Press [Start] dial.
    Cooking will start. After cooking, stand time will count down without oven operating.

Model NN-SG676

Model NN-SN65, NN-SN66, NN-SN67

Some recipes call for a standing time after cooking. After you have programmed the cooking power level and time, program the standing time.


  1. Press [Power level] to enter the desired Power level.
    • Power level P10 is the highest and P1 is the lowest.
  2. Set the cooking time, using the number pads.
  3. Press [Timer/Clock], [Timer], [Cooking Timer], or [Timer (More)] once.
    • Press the button according to your model. 
       
  4. Set the stand time, using the number pads. (up to 99 minutes and 99 seconds)
  5. Press [Start].
    • Cooking will start. After cooking, stand time will count down without oven operating.
    • The timer will start and then beep twice at the end of cooking time (the beginning of standing time). Five beeps will sound when standing time is done. 
    • Five beeps will sound when standing time is done. 

Model NN-SN651, NN-SN661, NN-SN671


Model NN-SN68KS


Some recipes call for a standing time after cooking. After you have programmed the cooking power level and time, program the standing time.

  1. Press [Power level] to enter the desired Power level. P10 is the highest and P1 is the lowest.
    • P10 and P1 have a max. cooking time of 30 minutes.
    • The lowest power level is P1 which has a max. Cooking time of 30 minutes. P0 is the (KEEP WARM) feature.
       
  2. Set the cooking time using the time buttons (10 min, 1 min, 10 sec.
     
  3. Press [Timer/Clock] once.
     
  4. Set the stand time using the time pads. P10 (HIGH) and P1 have max. cooking time of 30 minutes. For other power levels, the max. time is 99 minutes, 99 seconds
  5. Press [Start].
    • The timer will start. After cooking ends 2 beeps will sound (which is the begining of standing time), Stand time will count down without oven operating and 5 beeps will sound when standing time is done.

Model NN-SN686


Some recipes call for a standing time after cooking.

  1. Set desired amount of stand time using Number pads (up to 99 minutes, 99 seconds.
  2. Press [Start]. The timer will start and then beep twice at the end of cooking time (the beginning of standing time). Five beeps will sound when standing time is done.

Model NN-SN733


Model NN-SN736


Model NN-SN744


Some recipes call for a standing time after cooking.


  1. Press [Power level] to enter the desired Power level.
    • Power level P10 is the highest and P1 is the lowest.
  2. Set the cooking time, using the number pads.
  3. Press [Timer/Clock], once.
    • Press the button according to your model. 
       
  4. Set the stand time, using the number pads. (up to 99 minutes and 99 seconds)
  5. Press [Start].
    • Cooking will start. After cooking, stand time will count down without oven operating.
    • The timer will start and then beep twice at the end of cooking time (the beginning of standing time). Five beeps will sound when standing time is done. 
    • Five beeps will sound when standing time is done. 

Model NN-SN75, NN-SN76


Some recipes call for a standing time after cooking.


  1. Press [Power level] to enter the desired Power level.
    • Power level P10 is the highest and P1 is the lowest.
  2. Set the cooking time, using the number pads.
  3. Press [Timer (More)], once.
    • Press the button according to your model. 
       
  4. Set the stand time, using the number pads. (up to 99 minutes and 99 seconds)
  5. Press [Start].
    • Cooking will start. After cooking, stand time will count down without oven operating.
    • The timer will start and then beep twice at the end of cooking time (the beginning of standing time). Five beeps will sound when standing time is done. 
    • Five beeps will sound when standing time is done. 

Model NN-SN766


Some recipes call for a standing time after cooking.


  1. Press [Power level] to enter the desired Power level.
    • Power level P10 is the highest and P1 is the lowest.
  2. Set the cooking time, using the number pads.
  3. Press [Timer/Clock/Less], once.
    • Press the button according to your model. 
       
  4. Set the stand time, using the number pads. (up to 99 minutes and 99 seconds)
  5. Press [Start].
    • Cooking will start. After cooking, stand time will count down without oven operating.
    • The timer will start and then beep twice at the end of cooking time (the beginning of standing time). Five beeps will sound when standing time is done. 
    • Five beeps will sound when standing time is done. 

Model NN-SN773


Model NN-SN778


Model NN-SN936, NN-SN946


Model NN-SN96JS


Some recipes call for a standing time after cooking.


  1. Press [Power level] to enter the desired Power level.
    • Power level P10 is the highest and P1 is the lowest.
  2. Set the cooking time, using the number pads.
  3. Press [Timer/Clock], once.
    • Press the button according to your model. 
       
  4. Set the stand time, using the number pads. (up to 99 minutes and 99 seconds)
  5. Press [Start].
    • Cooking will start. After cooking, stand time will count down without oven operating.
    • The timer will start and then beep twice at the end of cooking time (the beginning of standing time). Five beeps will sound when standing time is done. 
    • Five beeps will sound when standing time is done. 

Model NN-SN965


Some recipes call for a standing time after cooking. After you have programmed the cooking power level and time, program the standing time.


  1. Press [Power level] to enter the desired Power level.
    • Power level P10 is the highest and P1 is the lowest.
  2. Set the cooking time, using the number pads.
  3. Press [Timer/Clock] once.
  4. Set the stand time, using the number pads. (up to 99 minutes and 99 seconds)
  5. Press [Start].
    • Cooking will start. After cooking, stand time will count down without oven operating.

Model NN-SN966


Model NN-SN97HS


Model NN-SN97JS


Some recipes call for a standing time after cooking.


  1. Press [Power level] to enter the desired Power level.
    • Power level P10 is the highest and P1 is the lowest.
  2. Set the cooking time, using the number pads.
  3. Press [Timer/Clock], once.
    • Press the button according to your model. 
       
  4. Set the stand time, using the number pads. (up to 99 minutes and 99 seconds)
  5. Press [Start].
    • Cooking will start. After cooking, stand time will count down without oven operating.
    • The timer will start and then beep twice at the end of cooking time (the beginning of standing time). Five beeps will sound when standing time is done. 
    • Five beeps will sound when standing time is done. 

Model NN-SN975


Some recipes call for a standing time after cooking. After you have programmed the cooking power level and time, program the standing time.


  1. Press [Power level] to enter the desired Power level.
    • Power level P10 is the highest and P1 is the lowest.
  2. Set the cooking time, using the number pads.
  3. Press [Cooking Timer] once.
  4. Set the stand time, using the number pads. (up to 99 minutes and 99 seconds)
  5. Press [Start].
    • Cooking will start. After cooking, stand time will count down without oven operating.

Model NN-ST27


Some recipes call for a standing time after cooking. After you have programmed the cooking power level and time, program the standing time.


  1. Press [Power level] to enter the desired Power level.
    • Power level P10 is the highest and P1 is the lowest.
  2. Set the cooking time, using the number pads.
  3. Press [Timer] once.
  4. Set the stand time, using the number pads. (up to 99 minutes and 99 seconds)
  5. Press [Start].
    • Cooking will start. After cooking, stand time will count down without oven operating.

Model NN-ST66


Model NN-ST661


Model NN-ST663


Some recipes call for a standing time after cooking. After you have programmed the cooking power level and time, program the standing time.


  1. Press [Power level] to enter the desired Power level.
    • Power level P10 is the highest and P1 is the lowest.
  2. Set the cooking time, using the number pads.
  3. Press [Timer/Clock], [Timer], [Cooking Timer], or [Timer (More)] once.
    • Press the button according to your model. 
       
  4. Set the stand time, using the number pads. (up to 99 minutes and 99 seconds)
  5. Press [Start].
    • Cooking will start. After cooking, stand time will count down without oven operating.

Model NN-ST67KS


Some recipes call for a standing time after cooking. After you have programmed the cooking power level and time, program the standing time.


  1. Press [Power level] to enter the desired Power level.
    • Power level P10 is the highest and P1 is the lowest.
  2. Set the cooking time, using the number pads.
  3. Press [Timer (More)] once.
    • Press the button according to your model. 
       
  4. Set the stand time, using the number pads. (up to 99 minutes and 99 seconds)
  5. Press [Start].
    • Cooking will start. After cooking, stand time will count down without oven operating.

Model NN-ST676


Model NN-ST681


Model NN-ST69KS


Model NN-ST696


Model NN-ST74, NN-ST75, NN-ST77LS


Some recipes call for a standing time after cooking. After you have programmed the cooking power level and time, program the standing time.


  1. Press [Power level] to enter the desired Power level.
    • Power level P10 is the highest and P1 is the lowest.
  2. Set the cooking time, using the number pads.
  3. Press [Timer (More)] once.
  4. Set the stand time, using the number pads. (up to 99 minutes and 99 seconds)
  5. Press [Start].
    • Cooking will start. After cooking, stand time will count down without oven operating.

Model NN-ST765, NN-ST775, NN-ST785


Model NN-ST766


Model NN-ST96JS, NN-ST98JS, NN-ST99JS


Some recipes call for a standing time after cooking. After you have programmed the cooking power level and time, program the standing time.

  1. Press [Power level] to enter the desired Power level. P10 is the highest and P1 is the lowest.
    • P10 and P1 have a max. cooking time of 30 minutes.
    • The lowest power level is P0 (KEEP WARM) which has a max. Cooking time of 30 minutes.
       
  2. Set the cooking time using the Number pads.
     
  3. Press [Timer/Clock (less] once.
     
  4. Set the stand time using the number pads. P10 (HIGH) and P0 (KEEP WARM) have max. cooking time of 30 minutes. For other power levels, the max. time is 99 minutes, 99 seconds
  5. Press [Start].
    • The timer will start. After cooking ends 2 beeps will sound (which is the begining of standing time), Stand time will count down without oven operating and 5 beeps will sound when standing time is done.

Model NN-ST966


Model NN-ST975


Model NN-SU63


Model NN-SU64, NN-SU65NB


Some recipes call for a standing time after cooking.


  1. Press [Power level] to enter the desired Power level.
    • Power level PL10 is the highest and PL1 is the lowest.
  2. Set the cooking time, using the number pads.
  3. Press [Timer/Clock], once.
    • Press the button according to your model. 
       
  4. Set the stand time, using the number pads. (up to 99 minutes and 99 seconds)
  5. Press [Start].
    • Cooking will start. After cooking, stand time will count down without oven operating.
    • The timer will start and then beep twice at the end of cooking time (the beginning of standing time). Five beeps will sound when standing time is done. 
    • Five beeps will sound when standing time is done. 

Model NN-SU65LS, NN-SU66LS


Model NN-SU65NS


  1. Press [Power Level] until the desired power level appears in the display window.
    • If cooking at high power (10), skip to step 2.
    • P10 is the highest and P1 is the lowest.

    •  
      Different Power Levels
      Press Power Level
      Once PL10 (HIGH)
      Twice PL9
      3 times PL8
      4 times PL7 (MED-HIGH)
      5 times PL6 (MEDIUM)
      6 times PL5
      7 times PL4
      8 times PL3 (MED-LOW)/DEFROST
      9 times PL2
      10 times PL1 (LOW)

  2. Set Cooking Time using the number pads or time pads.

    Number Pads


    model nnsb646 number pads
  3. Press [Timer].
  4. Set desired amount of stand time using Number pads (up to 99 minutes, 99 seconds).
  5. Press [Start].
    • The cooking will start and then beep twice at the end of cooking time (the beginning of standing time). Five beeps will sound when standing time is done.

Notes:

 
  1. For reheating, use PL10 (HIGH) for liquids, PL7 (MED-HIGH) for most foods, and PL6 (MEDIUM) for dense foods.

Do not overcook.

This oven requires less time to cook than older units. Overcooking will cause food to dry out and may cause a fire. A microwave oven's cooking power tells you the amount of microwave power available for cooking.

 

Stage Cooking:

  • For more than one stage of cooking, repeat steps 1 and 2 for each stage of cooking before pressing [Start].
  • The maximum number of stages for cooking is three.
  • When operating, two beeps will sound between each stage.
  • Five beeps will sound at the end of the entire sequence.
     

Note:

  1. After running the oven at PL10 power continously for 30 min, if the cook process is not complete, the oven will automatically adjust to PL8 power to protect the microwave and complete the cook cycle.
  2. If you want to cook again at PL10 power, you will need to wait 15 min before restarting.

Model NN-SU65QB, NN-SU65QS, NN-SU65QS


Model NN-SU656, NN-SU676, NN-SU686, NN-SU696


Model NN-SV79MS


Some recipes call for a standing time after cooking.


  1. Press [Microwave] to enter the desired Power level.
    • Power level PL10 is the highest and PL1 is the lowest.
  2. Set the cooking time, turn theAuto/Sensor Cook dial. PL 10 and KEEP WARM have max. cooking time of 30 minutes. For other power levels, the max. time is 1 hour and 30 minutes.
  3. Press [Timer/Clock], once.
  4. Set the standing time, turn theAuto/Sensor Cook dial. (up to 1 hour and 30 minutes.)
  5. Press [Start] dial.
    • Cooking will start. After cooking, stand time will count down without oven operating.
    • The timer will start and then beep twice at the end of cooking time (the beginning of standing time). Five beeps will sound when standing time is done. 
    • Five beeps will sound when standing time is done. 
  6. Standing Time and Delay Start can not be programmed together with auto programs (such as Defrost, Sensor Reheat, Auto/Sensor Cook )and preheating. This is to prevent the starting temperature of food from rising before defrosting or cooking begins. A change is starting temperature could cause inaccurate results. When using Standing Time or Delay Start, it is up to 2 power stages.

Model NN-T945



Warning


Your microwave oven is a cooking appliance and you should use as much care as you use with a stove or any other cooking appliance. DO NOT leave the oven unattended while in use.

©2024