How to setup my iPhone/Ipad Smart device to the Home Network System.

Make sure you have installed the [Home Network] app on your Smart device.
Make sure your Smart device can connect to the Internet.
Make sure the hub and your wireless router are turned on and the hub’s LED indicator is lit in yellow
Make sure you know the network name (SSID) and password assigned to your wireless router

Start the [Home Network] app.
Accept the Terms of Use agreement.
Tap [Set up the Hub].
When prompted, press the [Wi-Fi SETUP] button on the hub. The LED indicator blinks in yellow.
Change your Smart device Wi-Fi setting temporarily so that it connects to the hub directly. Open your Smart device [Settings] app.
Tap [Wi-Fi]
Select “KX-HNB600_panasonic”
Enter “00000000” as the password, and then tap [Join]. If more than 1 item named “KX-HNB600” is displayed, wait approx. 10 minutes and perform this procedure from the beginning.
Exit the Smart devices settings menu, Start the [Home Network] app again.
If necessary, enter the password required to connect to your wireless router and then tap [Next].
- The hub and your Smart device connect to your wireless router.
- If prompted, follow the on-screen instructions and connect your Smart device to your wireless router, start the app again, and then tap [Add Mobile Device].
When prompted, press the [Wi-Fi SETUP] button on the hub.
- Your Smart device will be registered to the hub.
When prompted, follow the on-screen instructions and set the password used to log in to the hub while away from home.
Follow the on-screen instructions to finish setting up the hub.
- The app’s home screen is displayed when initial setup is complete.

Watch the following video for a demonstration fo setting up an iphone to the hub.