How to use the Built-in Memory/SD Card. - DMC-TS30, DMC-TS6

The following operations can be performed using this unit:

When a card has not been inserted: Pictures can be recorded on the built-in memory and played back
When a card has been inserted: Pictures can be recorded on the card and played back

When using the built-in memory
Built in memory
- The access indication is displayed in red when pictures are being recorded on the built-in memory or SD card.
When using the card
SD Card in use
- The access indication is displayed in red when pictures are being recorded on the built-in memory or SD card.

Built-in Memory

You can copy the recorded pictures to a card.
DMC-TS30 Memory size: Approx. 220 MB
DMC-TS6 Memory size: Approx. 10 MB
The access time for the built-in memory may be longer than the access time for a card.

The following cards, which conform to the SD video standard, can be used with this unit. These cards are indicated as card in the text.

Memory Card Information
Memory Card	Remarks
SD Memory Card 8 MB to 2 GB)	Use a card with SD Speed Class with “Class 4” or higher when recording motion pictures. SD Speed Class is the speed standard regarding continuous writing. Check via the label on the card, etc SDHC Memory Cards and SDXC Memory Cards can be used only with their compatible devices. Check that the PC and other equipment are compatible when using the SDXC Memory Cards. Only the cards with capacity listed left can be used.
SDHC Memory Card (4 GB to 32 GB)
SDXC Memory Card (48 GB, 64 GB)

Note:

Do not turn this unit off, remove its battery or card, or disconnect the AC adaptor (optional) when the access indication is lit (hen pictures are being written, read or deleted, or the built-in memory or the card is being formatted. Furthermore, do not subject the camera to vibration, impact or static electricity. The card or the data on the card may be damaged, and this unit may no longer operate normally. If operation fails due to vibration, impact or static electricity, perform the operation again.
Write-Protect switch provided when this switch is set to the lock position, no further data writing, deletion or formatting is possible. The ability to write, delete and format data is restored when the switch is returned to its original position.
The data on the built-in memory or the card may be damaged or lost due to electromagnetic waves, static electricity or breakdown of the camera or the card. We recommend storing important data on a PC etc.
Do not format the card on your PC or other equipment. Format it on the camera only to ensure proper operation.
Keep the Memory Card out of reach of children to prevent swallowing.