How to use the [ Jet of Steam ] feature. - NI-W950

The " Jet of Steam" feature provides extra steam which goes deep into the garment and is helpful for removing stubborn wrinkles.
The " Jet of Steam" feature operates properly only in the [ MAX ] position of the Temperature Selector when steam or dry ironing (If used at lower setting, water spotting will occur because the iron is not hot enough to change water to steam).
If you have not used the " Jet of Steam" feature for a long time, it is necessary to clean the inside of the iron before using this feature on any clothes to be ironed.
Simply test the " Jet of Steam" feature several times away from the ironing board and clothes to be ironed. This will prevent brown spotting or water spotting on clothes.

Fill the iron with water.
Position the iron vertically and be sure the Temperature Selector is set to [ 0 ].
Plug the main lead into the household socket.
Set the Temperature Selector to the [ MAX ] position.
Preheat the iron until the Thermostat Operating Indicator light goes out, usually takes about 1 minute.
Simple pump the [ Jet of Steam ] button when steam is desired. Pump the [ Jet of Steam ] button several times at the beginning of each ironing session.
Press the [ Jet of Steam ] button in intervals of at least 5 seconds between use to prevent water spotting. Use a press cloth if necessary.