How to use the Sound positioning mode on the SC-GN01.

Speaker Positions

1. Forward Setting
2. Standard (centre) (Factory default)
3. Backward setting

How to change the Position Mode

It may not be possible to achieve a suitable surround effect due to the difference in positioning between the front and back speakers compared to the ear when the unit is placed on your shoulders. You can make allowances so that it sounds suitable by adjusting the audio output of the speakers.

1. While pressing the [MIC MUTE] button, press the [MUTE] button.
   • An operation tone is made and the unit is in the sound positioning mode.
   • When the unit enters the sound positioning mode, the operation indicator blinks four times each time.
2. While the unit is in the sound positioning mode, press the Volume up or down buttons to adjust.
   • Pressing the [+ VOL] up button sets the speaker sound position forwards
   • Pressing the [VOL -] down button sets the speaker sound position backwards.
   • An operation tone is made when set to forward, standard (centre), or backward.
3. Press any button other than the up or down VOL buttons to complete the settings. The settings are also completed if the unit is left in the sound positioning mode for 10 seconds or more.

Note

• The setting is maintained until it is changed again.