How to use the Touch actions for Technics and Panasonic Earphones.
You can remotely control Bluetooth® devices with the touch sensors on the earphones.
Select a model from the list below for specific Touch actions. If your model is not listed Refer to your models Operating Manual for specific procedure.
Models EAH-AZ40 and EAH-AZ60
- Depending on the Bluetooth® device, even when you operate the touch sensors on the earphones, there may be some functions that do not work or they may act differently to the way they are described below.
Function | Touch Sensor (L) | Touch Sensor (R) |
---|---|---|
Playback / Pause | Touch Once | |
Raise the volume | Touch rapidly 3 times | Not Available |
Lower the volume | Touch rapidly 2 times | Not Available |
Forward a track | Not Available | Touch rapidly 2 times |
Go back a track | Not Available | Touch rapidly 3 times |
Function | Touch Sensor (L) | Touch Sensor (R) |
---|---|---|
Receive a phone call | Touch once while receiving the call | |
Raise the volume | Touch rapidly 3 times | Not Available |
Lower the volume | Touch rapidly 2 times | Not Available |
Mute the voice of the caller | Not Available | Touch rapidly 2 times during the call |
To cancel Mute | Not Available | Touch rapidly 2 times during the call |
Switch the noise level heard from the other party | Not Available | Touch rapidly 3 times during the call |
Reject a phone call | Touch and hold for about 2 seconds while receiving the call | |
End a phone call | Touch and hold for about 2 seconds during the call |
Function | Touch Sensor (L) | Touch Sensor (R) |
---|---|---|
Change control of external sounds | Not Available | Touch and hold for about 2 seconds |
Start the voice assistant | Touch and hold for about 2 seconds | Not Available |
Model EAH-AZ70
- Depending on the Bluetooth® device, even when you operate the touch sensors on the earphones, there may be some functions that do not work or they may act differently to the way they are described below.
Function | Touch Sensor (L) | Touch Sensor (R) |
---|---|---|
Playback / Pause | Touch Once | |
Raise the volume | Touch rapidly 3 times | Not Available |
Lower the volume | Touch rapidly 2 times | Not Available |
Forward a track | Not Available | Touch rapidly 2 times |
Go back a track | Not Available | Touch rapidly 3 times |
Function | Touch Sensor (L) | Touch Sensor (R) |
---|---|---|
Receive a phone call | Touch once while receiving the call | |
Reject a phone call | Touch and hold for about 2 seconds while receiving the call | |
End a phone call | Touch and hold for about 2 seconds during the call |
Function | Touch Sensor (L) | Touch Sensor (R) |
---|---|---|
Switch between sound modes (Ambient Sound / Noise Cancelling) | Not Available | Touch and hold for about 2 seconds |
Trigger the device's voice assistant | Touch and hold for about 2 seconds | Not Available |
Put in Bluetooth®Registered pairing mode |
|
|
Trigger the device's voice assistant |
|
Model RZ-B110
- Depending on the Bluetooth® device, even when you operate the touch sensors on the earphones, there may be some functions that do not work or they may act differently to the way they are described below.
Function | Touch Sensor (L) | Touch Sensor (R) |
---|---|---|
Listening to Music | ||
Playback / Pause | Touch rapidly 2 times | |
Forward a track | Not Available | Touch and hold for about 2 seconds |
Go back a track | Touch and hold for about 2 seconds | Not Available |
Making a Phone Call | ||
Receiving a phone call | Touch Once while receiving a call | |
End a phone call | Touch rapidly 2 times during the call | |
Reject a phone call | Touch and hold for about 2 seconds while receiving the call | |
Receiving waiting call and end the 1st call | Touch once while receiving the waiting call | |
Reject the waiting call | Touch and hold for about 2 seconds while receiving the waiting call | Other Controls |
Start the voice assistant | Touch rapidly 3 times | |
Turning ON | Touch and hold L or R for about 3 seconds | |
Game Mode | Touch rapidly 5 times | |
Turning off | Touch and hold for about 5 seconds in disconnected state |
Using just one earphone
By pairing (registering) this unit, you can also use just one of the earphones independently. For example, if you take just the R side earphone out and leave the L side earphone in the charging cradle, the R side earphone will connect to the smartphone. This way, you can listen to music or make a call with one earphone while charging the other. The sound will be monaural.
When you are using just one of the earphones, taking the other earphone out of the charging cradle will automatically connect the earphones wirelessly with each other and switch use to both earphones. The sound will be stereo.
Note: During listening to music, the “back a track” operation is not available using the L side earphone while the R side earphone is charging.
Model RZ-B310
- Depending on the Bluetooth® device, even when you operate the touch sensors on the earphones, there may be some functions that do not work or they may act differently to the way they are described below.
Function | Touch Sensor (L) | Touch Sensor (R) |
---|---|---|
Listening to Music | ||
Playback / Pause | Touch Once | |
Forward a track | Not Available | Touch rapidly 2 times |
Go back a track | Touch rapidly 2 times | Not Available |
Making a Phone Call | ||
Receiving a phone call | Touch Once while receiving a call | |
End a phone call | Touch Once during the call | |
Reject a phone call | Touch and hold for about 2 seconds while receiving the call | |
Receiving a phone call | Touch Once while receiving a call | Other Controls |
Change control of external sounds | Touch and hold for about 3 second 3 different modes are switched each time you touch and hold the touch sensor. |
|
Start the voice assistant | Touch rapidly 3 times | |
Game Mode | Touch rapidly 5 times | |
Turning ON | Touch and hold L or R for about 3 seconds | |
Turning OFF | Touch and hold for about 5 seconds in disconnected state. |
Using just one earphone
By pairing (registering) this unit, you can also use just one of the earphones independently. For example, if you take just the R side earphone out and leave the L side earphone in the charging cradle, the R side earphone will connect to the smartphone. This way, you can listen to music or make a call with one earphone while charging the other. The sound will be monaural.
When you are using just one of the earphones, taking the other earphone out of the charging cradle will automatically connect the earphones wirelessly with each other and switch use to both earphones. The sound will be stereo.
Note: It is only possible to perform operations available on the side you are using.