Troubleshooting - Burnt cloth.

Ironing tips


  • Wait until the indicator light turns on after turning the Temperature Selector/Temperature control pad from a high temperature to a low temperature.
  • Set the Temperature Selector/Temperature control pad to an appropriate position, or use a press cloth if necessary.

Ironing Heat Level Recommendations for Different Fabrics

Acrylic: Set to low heat (1) with no steam, as acrylic is very sensitive to heat.

Antoron: Use a low heat (1) setting without steam. Iron gently to prevent any melting, as this fabric is very heat-sensitive.

Arnel: Set the iron to low heat (1) avoid using steam, as this fabric is delicate and can shrink.

Caprolan: Use low heat (1) avoid steam. Iron on the reverse side, as this fabric is highly sensitive to heat.

Cotton: Set the iron to high heat -3 - and use steam if possible. Iron on the reverse side to prevent shine.

Creslan: Use a low heat - 1- setting without steam. Creslan is a form of acrylic, so it can melt or deform under high temperatures.

Dacron: Set the iron to low heat -1 - It is sensitive to high heat and steam, so take care when ironing.

Fortel: Use low heat (1) avoid steam. This fabric is heat-sensitive, so avoid prolonged exposure to the iron.

Kodel: Set the iron to low heat (1) avoid steam to prevent damage to this synthetic fabric.

Linen: Use a high heat (3) setting with steam. Linen is durable and can handle high temperatures. For best results, iron while slightly damp.

Metallics: Use low heat (1) avoid direct contact with the iron. Place a cloth between the iron and fabric to protect the metallic finish.

Nylon & Acetate: Use low heat (1) without steam, as these fabrics can melt or warp under high temperatures.

Orlon: Use a low heat -1- setting without steam. Orlon is another form of acrylic and should be ironed carefully to avoid melting.

Perm Press (Permanent Press): Use low (1) to medium heat (2) These fabrics often require less ironing but can be smoothed with a moderate heat setting.

Polyester: Use low to medium heat (2) iron on the reverse side to avoid direct heat. Polyester is sensitive to high temperatures.

Rayon: Use low (1) to medium heat (2) iron on the reverse side to avoid damage.

Silk: Set to low heat (1) iron on the reverse side. Avoid using steam, as it can leave marks on delicate fabrics.

Suede: Avoid using an iron directly on suede. Instead, use a steam-only setting to remove wrinkles or take it to a professional cleaner for care.

Wool: Use medium (2) heat with a pressing cloth to avoid direct contact. Use steam sparingly, and avoid flattening the fibers.

Note: Always make sure to check the care labels on your fabrics and test the iron on a small, hidden area first when working with sensitive materials. If unsure, it’s best to start with a low heat setting and adjust accordingly.

©2024 Panasonic USA All rights reserved.

Our website uses cookies and similar tools to improve its performance and enhance your online user experience. By continuing to use this website without changing your settings, you consent to their use.