Troubleshooting - The breadmaker is displaying an error code.

Error codes generally display due to a malfunction or improper operation where troubleshooting is required to resolve error.



Error "1"

When the power supply to machine is interrupted for a certain time, the display shows “1” after recovered. (It is standby mode and machine could not continue the program.) Remove the bread, dough or ingredients and start again using new ingredients.

Error "ALERT"

There has been a power failure for more than 10 minutes (the plug has been accidently pulled out, or the breaker was activated), or there is another problem with the power supply.

The operation will not be affected if the problem with the power supply is only momentary. The breadmaker will operate again if its power is restored within 10 minutes, but the end result may be affected.

Error "H01"

The display indicates a problem with the machine. Refer to

For Warranty information select "Support Links" then "Warranty Information".

Error "H02"

The display indicates a problem with the machine. Refer to

For Warranty information select "Support Links" then "Warranty Information".

Error "Power Plug Symbol Displays"

Error "TEMP"

The unit is hot (above 40°C/105°F). This may occur with repeated use. Allow the unit to cool down to below 40°C/105°F before using it again ('U50' or 'TEMP' will disappear).

Error "U50"

The unit is hot (above 40°C/105°F). This may occur with repeated use. Allow the unit to cool down to below 40°C/105°F before using it again ('U50' or 'TEMP' will disappear).

©2024 Panasonic USA All rights reserved.