Unit turns off automatically or goes into Standby mode. Technics

Model SA-C100

Note: When the input source is "FM", this function does not work.

Model SA-C600

Note: When the input source is "FM", this function does not work.

Models SC-C30, SC-C50

The unit turns to standby mode by the auto off function.

1. Press the Input/Source button, etc. to cancel it.
   • The auto off function can be changed with the dedicated application “Technics Audio Center” Download for free at the Technics Global website.

Model SC-C500

Model SC-C65

To turn this feature OFF.

1. Press [SETUP].
2. Press the arrow up ▲ or down ▼ button repeatedly to select "AUTO OFF".
3. Press [OK].
4. Press the arrow up ▲, down ▼ or Left [◄], [►] button to select "OFF".
5. Press [OK].

Note: This unit incorporates a protection circuit to prevent damage caused by heat buildup. When you use this unit at a high volume level for a long period of time, it may turn off automatically. Wait for this unit to cool down before turning on this unit again. (For approximately 3 minutes)

Models SC-C70, SC-C70MK2

Note: When the input source is "FM" or "AM", this function does not work.

Model SE-R1

• Check if the auto off function is turned on? If it is, to cancel this function, set to [OFF] the [AUTO OFF] switch which is located on the rear panel.
  


• If the SU-R1 Network controller is connected to this unit via the system control function, this unit may automatically enter standby mode when the SU-R1 enters standby mode.

Model SL-C700

Models SL-G700, SL-G700M2

Is the auto off function turned on? If so turn off.

1. Press [NWP].
2. Press [SETUP].
3. Press the arrow up ▲ or down ▼ button repeatedly to select "AUTO OFF".
4. Press [OK].
5. Press the arrow up ▲ or down ▼ button to select "OFF".
6. Press [OK].

Note: The setting is stored even if the power is turned off and on.

Model ST-C700

Is the auto off function turned on? If so turn off.

1. Press [NWP].
2. Press [HOME].
3. Press the arrow up ▲ or down ▼ button repeatedly to select "SETUP".
4. Press [OK].
5. Press the arrow up ▲ or down ▼ button repeatedly to select "AUTO OFF".
6. Press [OK].
7. Press the arrow up ▲ or down ▼ button to select "OFF".
8. Press [OK].

Note: The auto off function works unless you turn it off, even if you turn off and on this unit.

Model ST-G30

• If the SSD is removed or malfunctions while this unit is in operation, this unit will turn off automatically Check to see if the SSD is attached correctly to the main unit.
• If this unit still turns off even after you have attached the SSD correctly, there may be a malfunction with the SSD.

Model SU-C700

Check if the auto off function is turned on? If it is, to cancel this function,

1. Press and hold [MUTE] until the PHONO indicator on this unit starts to blink.
2. Press [MUTE]. Each time you press the button.
   • COAX3 indicator blinks : On
   • OPT indicator blinks : Off
3. Press [VOL Down -] to exit.

If the ST-C700 is connected to this unit via the system control function, this unit may automatically enter standby mode when the ST-C700 enters standby mode.

Model SU-G30

Note: The auto off function works unless you turn it off, even if you turn this unit to standby mode and on.

Model SU-G700, SU-G700M2

Note: The setting is stored even if the power is turned off and on.

Model SU-GX70

The unit turns to standby mode by the auto off function.

1. Press the Input/Source button, etc. to cancel it.
   • The auto off function can be changed with the dedicated application “Technics Audio Center” Download for free at the Technics Global website.

Models SU-R1, SU-R1000