Possible cause and solutions
- Unplugged at wall outlet. Plug in firmly, push ON/OFF
switch to ON.
- Tripped circuit breaker/blown fuse at household service
panel. Reset circuit breaker or replace fuse.
- Loose hose electrical connections. Reconnect hose ends.
Line up the hose latch tab and notch in canister hood and
insert hose into canister until it snaps in place.
NOTE:The vacuum cleaner will not start unless hose is fully
inserted and snapped in place.
To Remove
- Lift hose latch tab upward and pull up on hose.
- Insert handle into wand until lock button snaps in place.
- Be sure the hose is not twisted.