How to use the [ Jet of Steam ] and [ Vertical Steam ] features.

Jet of Steam

The " Jet of Steam" feature provides extra steam which goes deep into the garment and is helpful for removing stubborn wrinkles.
The " Jet of Steam" feature operates properly only in the [ HIGH ] indication area of the [ SET ] pad when steam or dry ironing (If used at lower setting, water spotting will occur because the iron is not hot enough to change water to steam).
If you have not used the " Jet of Steam" feature for a long time, it is necessary to clean the inside of the iron before using this feature on any clothes to be ironed.
Simply test the " Jet of Steam" feature several times away from the ironing board and clothes to be ironed. This will prevent brown spotting or water spotting on clothes.

Fill the iron with water.
Plug the main lead into the household socket.
Set the iron on the Power Base securely. The green [ OFF ] light will turn on.
Push the [ Set ] Pad to the [ HIGH ] temperature level. The red light will start blinking.
Preheat the iron until the light turns red continuously, usually takes about 1- 2 minutes.
Simple pump the [ Jet of Steam ] button when steam is desired. Pump the [ Jet of Steam ] button several times at the beginning of each ironing session.
Press the [ Jet of Steam ] button in intervals of at least 5 seconds between use to prevent water spotting. Use a press cloth if necessary.

Do not touch the fabric with the iron. Keep the iron slightly over the fabric to prevent burns or disfiguring.

Vertical Steam

null

Perform the steps above.

Vertical Steam tips

Hang your garment on a hanger, and then attach the hanger to a hanger hook. Curtains and drapes may also be steamed once they are hung.
Hold the iron away from your body, close to but not touching the fabric.
Pull the garment tight with your free hand and pump the [ Vertical Steam ] (Jet of Steam) button at 5 second intervals as you pass the iron over the wrinkled fabric.

This answer applies to models NI-WL600, NI-WL602, NI-WL607