How to pair a cellular phone using the Link to Cell feature.
You can connect your base unit and cellular phone using Bluetooth wireless technology, so that you can make or answer cellular calls using your phone system. This allows you to:
- Use the unit to talk on cellular calls even if some areas of your home have poor cellular reception, simply by placing your cellular phone in an area with good reception
- Talk on cellular calls even if your cellular phone is in your pocket or bag.
- Enjoy cordless cellular calls even if your cellular phone plugged in and charging.
Programming process, Link to cell features and specifications vary by model. Select your model from the list below for information on using the Link to cell feature. If your model is not listed Refer to your models Operating Manual for specific instructions.
Models KX-PRD260, KX-PRD262
Important
- Your cellular phone must support the Hands Free Profile (HFP) specification.
- You may pair a maximum of 2 cellular phones. However, the base unit allows only one Bluetooth to be active at a time.
- The unit may not function properly with your Bluetooth device’s phone app depending on your Bluetooth device model, the devices connected to your Bluetooth device, and the apps installed on your Bluetooth device.
- Locate your cellular phone near the base unit. If the cellular phone is too close to the base unit during a cellular call, you may hear noise. For best performance, we recommend placing the cellular phone between 0.6 m to 3 m (2 feet to 10 feet) away from the base unit.
- For more details and the list of compatible cellular phones, Refer to our Cell Phone Compatibility List.
- Before pairing a Bluetooth enabled cellular phone to the base unit, make sure that no other Bluetooth device such as a Bluetooth headset is connected to your cellular phone.
- On the Handset:
For CELL 1: Press [MENU # 6 2 4 1]
For CELL 2: Press [MENU # 6 2 4 2]- After the CELL 1 or CELL 2 indicator on the base unit starts flashing, the rest of the procedure must be completed within 5 minutes.
- Your cellular phone:
While the corresponding CELL indicator is flashing, follow the instructions of your cellular phone to enter the pairing mode.- Depending on your cellular phone, it may ask you to enter the Bluetooth PIN (default: “0000”). If your cellular phone shows PassKey confirmation on its display, follow the directions to proceed.
- On the Handset:
Wait until a long beep sounds.- It may take more than 10 seconds to complete pairing.
- When the corresponding CELL indicator lights up, the cellular phone is connected to the base unit. You are ready to make cellular calls.
- Press [OFF].
Notes:
- If the cellular phone has already paired to the base unit, it is overwritten.
- Make sure that your cellular phone is set to connect to this product automatically. Refer to your cellular phones operating instructions.
- Make sure you cancel your cellular phones current pairing if you want to pair it to the other line.
- The default setting for the alert (text message alert) feature is “On”, so when you pair your cellular phone to the base unit, this feature may be activated. (This depends on the version and type of cellular phone you are using.)
View the Operating Manual for more Link to Cell features.
Model KX-PRL262
Important
- Your cellular phone must support the Hands Free Profile (HFP) specification.
- You may pair a maximum of 2 cellular phones. However, the base unit allows only one Bluetooth to be active at a time.
- The unit may not function properly with your Bluetooth device’s phone app depending on your Bluetooth device model, the devices connected to your Bluetooth device, and the apps installed on your Bluetooth device.
- Locate your cellular phone near the base unit. If the cellular phone is too close to the base unit during a cellular call, you may hear noise. For best performance, we recommend placing the cellular phone between 0.6 m to 3 m (2 feet to 10 feet) away from the base unit.
- For more details and the list of compatible cellular phones, Refer to our Cell Phone Compatibility List.
- Before pairing a Bluetooth enabled cellular phone to the base unit, make sure that no other Bluetooth device such as a Bluetooth headset is connected to your cellular phone.
- On the Handset:
For CELL 1: Press [MENU # 6 2 4 1]
For CELL 2: Press [MENU # 6 2 4 2]- After the CELL 1 or CELL 2 indicator on the base unit starts flashing, the rest of the procedure must be completed within 5 minutes.
- Your cellular phone:
While the corresponding CELL indicator is flashing, follow the instructions of your cellular phone to enter the pairing mode.- Depending on your cellular phone, it may ask you to enter the Bluetooth PIN (default: “0000”). If your cellular phone shows PassKey confirmation on its display, follow the directions to proceed.
- On the Handset:
Wait until a long beep sounds.- It may take more than 10 seconds to complete pairing.
- When the corresponding CELL indicator lights up, the cellular phone is connected to the base unit. You are ready to make cellular calls.
- Press [OFF].
Notes:
- If the cellular phone has already paired to the base unit, it is overwritten.
- Make sure that your cellular phone is set to connect to this product automatically. Refer to your cellular phones operating instructions.
- Make sure you cancel your cellular phones current pairing if you want to pair it to the other line.
- The default setting for the alert (text message alert) feature is “On”, so when you pair your cellular phone to the base unit, this feature may be activated. (This depends on the version and type of cellular phone you are using.)
View the Operating Manual for more Link to Cell features.
Model KX-TG153CSK
Important
- Your cellular phone must support the Hands Free Profile (HFP) specification.
- You may pair 2 cellular phones and 1 headset. Only 2 Bluetooth devices can be used with the unit at the same time (for example, 2 cellular lines, or the headset and 1 cellular line). You cannot use a Bluetooth headset to talk on a cellular line.
- The unit can be used to talk on 2 lines at the same time (for example, 2 cellular lines,or the landline and 1 cellular line).
- Locate your cellular phone near the base unit. If the cellular phone is too close to the base unit during a cellular call, you may hear noise. For best performance, we recommend placing the cellular phone between 0.6 m to 3 m (2 feet to 10 feet) away from the base unit.
- For more details and the list of compatible cellular phones, Refer to our Cell Phone Compatibility List.
- Before pairing a Bluetooth enabled cellular phone to the base unit, make sure that no other Bluetooth device such as a Bluetooth headset is connected to your cellular phone.
- Base unit:
Press and hold [CELL 1] or [CELL 2] for about 5 seconds. After the corresponding CELL indicator on the base unit starts flashing, the rest of the procedure must be completed within 5 minutes. - Your cellular phone:
While the corresponding CELL indicator is flashing, follow the instructions of your cellular phone to enter the pairing mode. Depending on your cellular phone, it may ask you to enter the Bluetooth PIN (default: “0000”). If your cellular phone shows PassKey confirmation on its display, tap [OK] or otherwise to accept the pairing request. - Base unit:
Wait until a long beep sounds. It may take more than 10 seconds to complete pairing. When the corresponding CELL indicator lights up, the cellular phone is connected to the base unit.
You are ready to make cellular calls. - Press [EXIT].
View an example video of this programming on our YouTube Channel.
Notes:
- If the cellular phone has already paired to the base unit, it is overwritten.
- Make sure that your cellular phone is set to connect to this product automatically. Refer to your cellular phones operating instructions.
- Make sure you cancel your cellular phones current pairing if you want to pair it to the other line.
- The default setting for the alert (text message alert) feature is “On”, so when you pair your cellular phone to the base unit, this feature may be activated. (This depends on the version and type of cellular phone you are using.)
View the Operating Manual for KX-TG153 for more Link to Cell features.
Model KX-TG155SK
Important
- Your cellular phone must support the Hands Free Profile (HFP) specification.
- Up to 2 cellular phones can be registered. However, only one Bluetooth device (cellular phone or headset) can be connected to the base unit at a time.
- Locate your cellular phone near the base unit. If the cellular phone is too close to the base unit during a cellular call, you may hear noise. For best performance, we recommend placing the cellular phone between 0.6 m to 3m (2 feet to 10 feet) away from the base unit.
- For more details and the list of compatible cellular phones, Refer to our Cell Phone Compatibility List.
- Before pairing a Bluetooth enabled cellular phone to the base unit, make sure that no other Bluetooth device such as a Bluetooth headset is connected to your cellular phone.
- On the Handset:
For CELL 1: Press [MENU # 6 2 4 1]
For CELL 2: Press [MENU # 6 2 4 2]- After the CELL 1 or CELL 2 indicator on the base unit starts flashing, the rest of the procedure must be completed within 5 minutes.
- Your cellular phone:
While the corresponding CELL indicator is flashing, follow the instructions of your cellular phone to enter the pairing mode.- Depending on your cellular phone, it may ask you to enter the Bluetooth PIN (default: “0000”). If your cellular phone shows PassKey confirmation on its display, follow the directions to proceed.
- On the Handset:
Wait until a long beep sounds.- It may take more than 10 seconds to complete pairing.
- When the corresponding CELL indicator lights in green, the cellular phone is connected to the base unit. You are ready to make cellular calls.
- Press [OFF].
Notes:
- Make sure that your cellular phone is set to connect to this product automatically. Refer to your cellular phones operating instructions.
- Make sure you cancel your cellular phones current pairing if you want to pair it to the other line.
View the Operating Manual for KX-TG155SK for more Link to Cell features.
Model KX-TG175CSK
Important
- Your cellular phone must support the Hands Free Profile (HFP) specification.
- You may pair 2 cellular phones and 1 headset. Only 2 Bluetooth devices can be used with the unit at the same time (for example, 2 cellular lines, or the headset and 1 cellular line). You cannot use a Bluetooth headset to talk on a cellular line.
- The unit can be used to talk on 2 lines at the same time (for example, 2 cellular lines,or the landline and 1 cellular line).
- Locate your cellular phone near the base unit. If the cellular phone is too close to the base unit during a cellular call, you may hear noise. For best performance, we recommend placing the cellular phone between 0.6 m to 3 m (2 feet to 10 feet) away from the base unit.
- For more details and the list of compatible cellular phones, Refer to our Cell Phone Compatibility List.
- Before pairing a Bluetooth enabled cellular phone to the base unit, make sure that no other Bluetooth device such as a Bluetooth headset is connected to your cellular phone.
- Base unit:
Press and hold [CELL 1] or [CELL 2] for about 5 seconds. After the corresponding CELL indicator on the base unit starts flashing, the rest of the procedure must be completed within 5 minutes. - Your cellular phone:
While the corresponding CELL indicator is flashing, follow the instructions of your cellular phone to enter the pairing mode. Depending on your cellular phone, it may ask you to enter the Bluetooth PIN (default: “0000”). If your cellular phone shows PassKey confirmation on its display, tap [OK] or otherwise to accept the pairing request. - Base unit:
Wait until a long beep sounds. It may take more than 10 seconds to complete pairing. When the corresponding CELL indicator lights up, the cellular phone is connected to the base unit.
You are ready to make cellular calls. - Press [EXIT].
View an example video of this programming on our YouTube Channel.
Notes:
- If the cellular phone has already paired to the base unit, it is overwritten.
- Make sure that your cellular phone is set to connect to this product automatically. Refer to your cellular phones operating instructions.
- Make sure you cancel your cellular phones current pairing if you want to pair it to the other line.
- The default setting for the alert (text message alert) feature is “On”, so when you pair your cellular phone to the base unit, this feature may be activated. (This depends on the version and type of cellular phone you are using.)
View the Operating Manual for KX-TG175CSK for more Link to Cell features.
Model KX-TG265CSK
Important
- Your cellular phone must support the Hands Free Profile (HFP) specification.
- Up to 2 cellular phones can be registered. However, only one Bluetooth device (cellular phone or headset) can be connected to the base unit at a time.
- Locate your cellular phone near the base unit. If the cellular phone is too close to the base unit during a cellular call, you may hear noise. For best performance, we recommend placing the cellular phone between 0.6 m to 3m (2 feet to 10 feet) away from the base unit.
- For more details and the list of compatible cellular phones, Refer to our Cell Phone Compatibility List.
- Before pairing a Bluetooth enabled cellular phone to the base unit, make sure that no other Bluetooth device such as a Bluetooth headset is connected to your cellular phone.
- On the Handset:
For CELL 1: Press [MENU # 6 2 4 1]
For CELL 2: Press [MENU # 6 2 4 2]- After the CELL 1 or CELL 2 indicator on the base unit starts flashing, the rest of the procedure must be completed within 5 minutes.
- Your cellular phone:
While the corresponding CELL indicator is flashing, follow the instructions of your cellular phone to enter the pairing mode.- Depending on your cellular phone, it may ask you to enter the Bluetooth PIN (default: “0000”). If your cellular phone shows PassKey confirmation on its display, follow the directions to proceed.
- On the Handset:
Wait until a long beep sounds.- It may take more than 10 seconds to complete pairing.
- When the corresponding CELL indicator lights in green, the cellular phone is connected to the base unit. You are ready to make cellular calls.
- Press [OFF].
Notes:
- Make sure that your cellular phone is set to connect to this product automatically. Refer to your cellular phones operating instructions.
- Make sure you cancel your cellular phones current pairing if you want to pair it to the other line.
View the Operating Manual for KX-TG265SK for more Link to Cell features.
Models KX-TG273CSK
Important
- Your cellular phone must support the Hands Free Profile (HFP) specification.
- You may pair 2 cellular phones and 1 headset. Only 2 Bluetooth devices can be used with the unit at the same time (for example, 2 cellular lines, or the headset and 1 cellular line). You cannot use a Bluetooth headset to talk on a cellular line.
- The unit can be used to talk on 2 lines at the same time (for example, 2 cellular lines,or the landline and 1 cellular line).
- Locate your cellular phone near the base unit. If the cellular phone is too close to the base unit during a cellular call, you may hear noise. For best performance, we recommend placing the cellular phone between 0.6 m to 3 m (2 feet to 10 feet) away from the base unit.
- For more details and the list of compatible cellular phones, Refer to our Cell Phone Compatibility List.
- Before pairing a Bluetooth enabled cellular phone to the base unit, make sure that no other Bluetooth device such as a Bluetooth headset is connected to your cellular phone.
- Base unit:
Press and hold [CELL 1] or [CELL 2] for about 5 seconds. After the corresponding CELL indicator on the base unit starts flashing, the rest of the procedure must be completed within 5 minutes. - Your cellular phone:
While the corresponding CELL indicator is flashing, follow the instructions of your cellular phone to enter the pairing mode. Depending on your cellular phone, it may ask you to enter the Bluetooth PIN (default: “0000”). If your cellular phone shows PassKey confirmation on its display, tap [OK] or otherwise to accept the pairing request. - Base unit:
Wait until a long beep sounds. It may take more than 10 seconds to complete pairing. When the corresponding CELL indicator lights up, the cellular phone is connected to the base unit.
You are ready to make cellular calls. - Press [EXIT].
View an example video of this programming on our YouTube Channel.
Notes:
- If the cellular phone has already paired to the base unit, it is overwritten.
- Make sure that your cellular phone is set to connect to this product automatically. Refer to your cellular phones operating instructions.
- Make sure you cancel your cellular phones current pairing if you want to pair it to the other line.
- The default setting for the alert (text message alert) feature is “On”, so when you pair your cellular phone to the base unit, this feature may be activated. (This depends on the version and type of cellular phone you are using.)
View the Operating Manual for KX-TG273SK for more Link to Cell features.
Model KX-TG365SK
Important
- Your cellular phone must support the Hands Free Profile (HFP) specification.
- Up to 2 cellular phones can be registered. However, only one Bluetooth device (cellular phone or headset) can be connected to the base unit at a time.
- Locate your cellular phone near the base unit. If the cellular phone is too close to the base unit during a cellular call, you may hear noise. For best performance, we recommend placing the cellular phone between 0.6 m to 3m (2 feet to 10 feet) away from the base unit.
- For more details and the list of compatible cellular phones, Refer to our Cell Phone Compatibility List.
- Before pairing a Bluetooth enabled cellular phone to the base unit, make sure that no other Bluetooth device such as a Bluetooth headset is connected to your cellular phone.
- On the Handset:
For CELL 1: Press [MENU # 6 2 4 1]
For CELL 2: Press [MENU # 6 2 4 2]- After the CELL 1 or CELL 2 indicator on the base unit starts flashing, the rest of the procedure must be completed within 5 minutes.
- Your cellular phone:
While the corresponding CELL indicator is flashing, follow the instructions of your cellular phone to enter the pairing mode.- Depending on your cellular phone, it may ask you to enter the Bluetooth PIN (default: “0000”). If your cellular phone shows PassKey confirmation on its display, follow the directions to proceed.
- On the Handset:
Wait until a long beep sounds.- It may take more than 10 seconds to complete pairing.
- When the corresponding CELL indicator lights up, the cellular phone is connected to the base unit. You are ready to make cellular calls.
- Press [OFF].
Notes:
- Make sure that your cellular phone is set to connect to this product automatically. Refer to your cellular phones operating instructions.
- Make sure you cancel your cellular phones current pairing if you want to pair it to the other line.
View the Operating Manual for KX-TG365SK for more Link to Cell features.
Models KX-TG385SK
Important
- Your cellular phone must support the Hands Free Profile (HFP) specification.
- Up to 2 cellular phones can be registered. However, only one Bluetooth device (cellular phone or headset) can be connected to the base unit at a time.
- Locate your cellular phone near the base unit. If the cellular phone is too close to the base unit during a cellular call, you may hear noise. For best performance, we recommend placing the cellular phone between 0.6 m to 3m (2 feet to 10 feet) away from the base unit.
- For more details and the list of compatible cellular phones, Refer to our Cell Phone Compatibility List.
- Before pairing a Bluetooth enabled cellular phone to the base unit, make sure that no other Bluetooth device such as a Bluetooth headset is connected to your cellular phone.
- On the Handset:
For CELL 1: Press [MENU # 6 2 4 1]
For CELL 2: Press [MENU # 6 2 4 2]- After the CELL 1 or CELL 2 indicator on the base unit starts flashing, the rest of the procedure must be completed within 5 minutes.
- Your cellular phone:
While the corresponding CELL indicator is flashing, follow the instructions of your cellular phone to enter the pairing mode.- Depending on your cellular phone, it may ask you to enter the Bluetooth PIN (default: “0000”). If your cellular phone shows PassKey confirmation on its display, follow the directions to proceed.
- On the Handset:
Wait until a long beep sounds.- It may take more than 10 seconds to complete pairing.
- When the corresponding CELL indicator lights up, the cellular phone is connected to the base unit. You are ready to make cellular calls.
- Press [OFF].
Notes:
- Make sure that your cellular phone is set to connect to this product automatically. Refer to your cellular phones operating instructions.
- Make sure you cancel your cellular phones current pairing if you want to pair it to the other line.
View the Operating Manual for KX-TG385SK for more Link to Cell features.
Models KX-TG395CSK/SK
Important
- Your cellular phone must support the Hands Free Profile (HFP) specification.
- Up to 2 cellular phones can be registered. However, only one Bluetooth device (cellular phone or headset) can be connected to the base unit at a time.
- Locate your cellular phone near the base unit. If the cellular phone is too close to the base unit during a cellular call, you may hear noise. For best performance, we recommend placing the cellular phone between 0.6 m to 3m (2 feet to 10 feet) away from the base unit.
- For more details and the list of compatible cellular phones, Refer to our Cell Phone Compatibility List.
- Before pairing a Bluetooth enabled cellular phone to the base unit, make sure that no other Bluetooth device such as a Bluetooth headset is connected to your cellular phone.
- On the Handset:
For CELL 1: Press [MENU # 6 2 4 1]
For CELL 2: Press [MENU # 6 2 4 2]- After the CELL 1 or CELL 2 indicator on the base unit starts flashing, the rest of the procedure must be completed within 5 minutes.
- Your cellular phone:
While the corresponding CELL indicator is flashing, follow the instructions of your cellular phone to enter the pairing mode.- Depending on your cellular phone, it may ask you to enter the Bluetooth PIN (default: “0000”). If your cellular phone shows PassKey confirmation on its display, follow the directions to proceed.
- On the Handset:
Wait until a long beep sounds.- It may take more than 10 seconds to complete pairing.
- When the corresponding CELL indicator lights up, the cellular phone is connected to the base unit. You are ready to make cellular calls.
- Press [OFF].
Notes:
- Make sure that your cellular phone is set to connect to this product automatically. Refer to your cellular phones operating instructions.
- Make sure you cancel your cellular phones current pairing if you want to pair it to the other line.
View the Operating Manual for KX-TG395SK for more Link to Cell features.
Models KX-TG454SK or KX-TG465CSK/SK
Important
- Your cellular phone must support the Hands Free Profile (HFP) specification.
- You may pair 2 cellular phones and 1 headset. Only 2 Bluetooth devices can be used with the unit at the same time (for example, 2 cellular lines, or the headset and 1 cellular line). You cannot use a Bluetooth headset to talk on a cellular line.
- The unit can be used to talk on 2 lines at the same time (for example, 2 cellular lines,or the landline and 1 cellular line).
- Locate your cellular phone near the base unit. If the cellular phone is too close to the base unit during a cellular call, you may hear noise. For best performance, we recommend placing the cellular phone between 0.6 m to 3 m (2 feet to 10 feet) away from the base unit.
- For more details and the list of compatible cellular phones, Refer to our Cell Phone Compatibility List.
- Before pairing a Bluetooth enabled cellular phone to the base unit, make sure that no other Bluetooth device such as a Bluetooth headset is connected to your cellular phone.
- On the Handset:
For CELL 1: Press [MENU # 6 2 4 1]
For CELL 2: Press [MENU # 6 2 4 2]- After the CELL 1 or CELL 2 indicator on the base unit starts flashing, the rest of the procedure must be completed within 5 minutes.
- Your cellular phone:
While the corresponding CELL indicator is flashing, follow the instructions of your cellular phone to enter the pairing mode.- Depending on your cellular phone, it may ask you to enter the Bluetooth PIN (default: “0000”). If your cellular phone shows PassKey confirmation on its display, follow the directions to proceed.
- On the Handset:
Wait until a long beep sounds.- It may take more than 10 seconds to complete pairing.
- When the corresponding CELL indicator lights up, the cellular phone is connected to the base unit. You are ready to make cellular calls.
- Press [OFF].
Notes:
- Make sure that your cellular phone is set to connect to this product automatically. Refer to your cellular phones operating instructions.
- Make sure you cancel your cellular phones current pairing if you want to pair it to the other line.
View the Operating Manual for more Link to Cell features.
Models KX-TG472SK, KX-TG473SK, KX-TG484SK
Important
- Your cellular phone must support the Hands Free Profile (HFP) specification.
- You may pair 2 cellular phones and 1 headset. Only 2 Bluetooth devices can be used with the unit at the same time (for example, 2 cellular lines, or the headset and 1 cellular line). You cannot use a Bluetooth headset to talk on a cellular line.
- The unit can be used to talk on 2 lines at the same time (for example, 2 cellular lines,or the landline and 1 cellular line).
- Locate your cellular phone near the base unit. If the cellular phone is too close to the base unit during a cellular call, you may hear noise. For best performance, we recommend placing the cellular phone between 0.6 m to 3 m (2 feet to 10 feet) away from the base unit.
- For more details and the list of compatible cellular phones, Refer to our Cell Phone Compatibility List.
- Before pairing a Bluetooth enabled cellular phone to the base unit, make sure that no other Bluetooth device such as a Bluetooth headset is connected to your cellular phone.
- On the Handset:
For CELL 1: Press [MENU # 6 2 4 1]
For CELL 2: Press [MENU # 6 2 4 2]- After the CELL 1 or CELL 2 indicator on the base unit starts flashing, the rest of the procedure must be completed within 5 minutes.
- Your cellular phone:
While the corresponding CELL indicator is flashing, follow the instructions of your cellular phone to enter the pairing mode.- Depending on your cellular phone, it may ask you to enter the Bluetooth PIN (default: “0000”). If your cellular phone shows PassKey confirmation on its display, follow the directions to proceed.
- On the Handset:
Wait until a long beep sounds.- It may take more than 10 seconds to complete pairing.
- When the corresponding CELL indicator lights up, the cellular phone is connected to the base unit. You are ready to make cellular calls.
- Press [OFF].
Notes:
- Make sure that your cellular phone is set to connect to this product automatically. Refer to your cellular phones operating instructions.
- Make sure you cancel your cellular phones current pairing if you want to pair it to the other line.
View the Operating Manual for KX-TG472SK and KX-TG473SK for more Link to Cell features.
View the Operating Manual for KX-TG484SK for more Link to Cell features.
Model KX-TG585SK
Important
- Your cellular phone must support the Hands Free Profile (HFP) specification.
- You may pair 2 cellular phones and 1 headset. Only 2 Bluetooth devices can be used with the unit at the same time (for example, 2 cellular lines, or the headset and 1 cellular line). You cannot use a Bluetooth headset to talk on a cellular line.
- The unit can be used to talk on 2 lines at the same time (for example, 2 cellular lines,or the landline and 1 cellular line).
- Locate your cellular phone near the base unit. If the cellular phone is too close to the base unit during a cellular call, you may hear noise. For best performance, we recommend placing the cellular phone between 0.6 m to 3 m (2 feet to 10 feet) away from the base unit.
- For more details and the list of compatible cellular phones, Refer to our Cell Phone Compatibility List.
- Before pairing a Bluetooth enabled cellular phone to the base unit, make sure that no other Bluetooth device such as a Bluetooth headset is connected to your cellular phone.
- Base unit:
Press and hold [CELL 1] or [CELL 2] for about 5 seconds. After the corresponding CELL indicator on the base unit starts flashing, the rest of the procedure must be completed within 5 minutes. - Your cellular phone:
While the corresponding CELL indicator is flashing, follow the instructions of your cellular phone to enter the pairing mode. Depending on your cellular phone, it may ask you to enter the Bluetooth PIN (default: “0000”). If your cellular phone shows PassKey confirmation on its display, tap [OK] or otherwise to accept the pairing request. - Base unit:
Wait until a long beep sounds. It may take more than 10 seconds to complete pairing. When the corresponding CELL indicator lights up, the cellular phone is connected to the base unit.
You are ready to make cellular calls. - Press [EXIT].
View an example video of this programming on our YouTube Channel.
Notes:
- If the cellular phone has already paired to the base unit, it is overwritten.
- Make sure that your cellular phone is set to connect to this product automatically. Refer to your cellular phones operating instructions.
- Make sure you cancel your cellular phones current pairing if you want to pair it to the other line.
- The default setting for the alert (text message alert) feature is “On”, so when you pair your cellular phone to the base unit, this feature may be activated. (This depends on the version and type of cellular phone you are using.)
View the Operating Manual for KX-TG585SK for more Link to Cell features.
Model KX-TG592SK
Important
- Your cellular phone must support the Hands Free Profile (HFP) specification.
- You may pair 2 cellular phones and 1 headset. Only 2 Bluetooth devices can be used with the unit at the same time (for example, 2 cellular lines, or the headset and 1 cellular line). You cannot use a Bluetooth headset to talk on a cellular line.
- The unit can be used to talk on 2 lines at the same time (for example, 2 cellular lines,or the landline and 1 cellular line).
- Locate your cellular phone near the base unit. If the cellular phone is too close to the base unit during a cellular call, you may hear noise. For best performance, we recommend placing the cellular phone between 0.6 m to 3 m (2 feet to 10 feet) away from the base unit.
- For more details and the list of compatible cellular phones, Refer to our Cell Phone Compatibility List.
- Before pairing a Bluetooth enabled cellular phone to the base unit, make sure that no other Bluetooth device such as a Bluetooth headset is connected to your cellular phone.
- Base unit:
Press and hold [CELL 1] or [CELL 2] for about 5 seconds. After the corresponding CELL indicator on the base unit starts flashing, the rest of the procedure must be completed within 5 minutes. - Your cellular phone:
While the corresponding CELL indicator is flashing, follow the instructions of your cellular phone to enter the pairing mode. Depending on your cellular phone, it may ask you to enter the Bluetooth PIN (default: “0000”). If your cellular phone shows PassKey confirmation on its display, tap [OK] or otherwise to accept the pairing request. - Base unit:
Wait until a long beep sounds. It may take more than 10 seconds to complete pairing. When the corresponding CELL indicator lights up, the cellular phone is connected to the base unit.
You are ready to make cellular calls. - Press [EXIT].
View an example video of this programming on our YouTube Channel.
Notes:
- If the cellular phone has already paired to the base unit, it is overwritten.
- Make sure that your cellular phone is set to connect to this product automatically. Refer to your cellular phones operating instructions.
- Make sure you cancel your cellular phones current pairing if you want to pair it to the other line.
- The default setting for the alert (text message alert) feature is “On”, so when you pair your cellular phone to the base unit, this feature may be activated. (This depends on the version and type of cellular phone you are using.)
View the Operating Manual for KX-TG592SK for more Link to Cell features.
Models KX-TG654SK, KX-TG674SK, KX-TG684SK
Important
- Your cellular phone must support the Hands Free Profile (HFP) specification.
- You may pair 2 cellular phones and 1 headset. Only 2 Bluetooth devices can be used with the unit at the same time (for example, 2 cellular lines, or the headset and 1 cellular line). You cannot use a Bluetooth headset to talk on a cellular line.
- The unit can be used to talk on 2 lines at the same time (for example, 2 cellular lines,or the landline and 1 cellular line).
- Locate your cellular phone near the base unit. If the cellular phone is too close to the base unit during a cellular call, you may hear noise. For best performance, we recommend placing the cellular phone between 0.6 m to 3 m (2 feet to 10 feet) away from the base unit.
- For more details and the list of compatible cellular phones, Refer to our Cell Phone Compatibility List.
- Before pairing a Bluetooth enabled cellular phone to the base unit, make sure that no other Bluetooth device such as a Bluetooth headset is connected to your cellular phone.
- Base unit:
Press and hold [CELL 1] or [CELL 2] for about 5 seconds. After the corresponding CELL indicator on the base unit starts flashing, the rest of the procedure must be completed within 5 minutes. - Your cellular phone:
While the corresponding CELL indicator is flashing, follow the instructions of your cellular phone to enter the pairing mode. Depending on your cellular phone, it may ask you to enter the Bluetooth PIN (default: “0000”). If your cellular phone shows PassKey confirmation on its display, tap [OK] or otherwise to accept the pairing request. - Base unit:
Wait until a long beep sounds. It may take more than 10 seconds to complete pairing. When the corresponding CELL indicator lights up, the cellular phone is connected to the base unit.
You are ready to make cellular calls. - Press [EXIT].
View an example video of this programming on our YouTube Channel.
Notes:
- If the cellular phone has already paired to the base unit, it is overwritten.
- Make sure that your cellular phone is set to connect to this product automatically. Refer to your cellular phones operating instructions.
- Make sure you cancel your cellular phones current pairing if you want to pair it to the other line.
- The default setting for the alert (text message alert) feature is “On”, so when you pair your cellular phone to the base unit, this feature may be activated. (This depends on the version and type of cellular phone you are using.)
View the Operating Manual for KX-TG654 and Kx-TG684 for more Link to Cell features.
View the Operating Manual for KX-TG674 for more Link to Cell features.
Model KX-TG744SK
Important
- Your cellular phone must support the Hands Free Profile (HFP) specification.
- You may pair 2 cellular phones and 1 headset. Only 2 Bluetooth devices can be used with the unit at the same time (for example, 2 cellular lines, or the headset and 1 cellular line). You cannot use a Bluetooth headset to talk on a cellular line.
- The unit can be used to talk on 2 lines at the same time (for example, 2 cellular lines,or the landline and 1 cellular line).
- Locate your cellular phone near the base unit. If the cellular phone is too close to the base unit during a cellular call, you may hear noise. For best performance, we recommend placing the cellular phone between 0.6 m to 3 m (2 feet to 10 feet) away from the base unit.
- For more details and the list of compatible cellular phones, Refer to our Cell Phone Compatibility List.
- Before pairing a Bluetooth enabled cellular phone to the base unit, make sure that no other Bluetooth device such as a Bluetooth headset is connected to your cellular phone.
- Base unit:
Press and hold [CELL 1] or [CELL 2] for about 5 seconds. After the corresponding CELL indicator on the base unit starts flashing, the rest of the procedure must be completed within 5 minutes. - Your cellular phone:
While the corresponding CELL indicator is flashing, follow the instructions of your cellular phone to enter the pairing mode. Depending on your cellular phone, it may ask you to enter the Bluetooth PIN (default: “0000”). If your cellular phone shows PassKey confirmation on its display, tap [OK] or otherwise to accept the pairing request. - Base unit:
Wait until a long beep sounds. It may take more than 10 seconds to complete pairing. When the corresponding CELL indicator lights up, the cellular phone is connected to the base unit.
You are ready to make cellular calls. - Press [EXIT].
View an example video of this programming on our YouTube Channel.
Notes:
- If the cellular phone has already paired to the base unit, it is overwritten.
- Make sure that your cellular phone is set to connect to this product automatically. Refer to your cellular phones operating instructions.
- Make sure you cancel your cellular phones current pairing if you want to pair it to the other line.
- The default setting for the alert (text message alert) feature is “On”, so when you pair your cellular phone to the base unit, this feature may be activated. (This depends on the version and type of cellular phone you are using.)
View the Operating Manual for KX-TG744SK for more Link to Cell features.
Models that begin with KX-TG784
Important
- Your cellular phone must support the Hands Free Profile (HFP) specification.
- Up to 2 cellular phones can be registered. However, only one Bluetooth device (cellular phone or headset) can be connected to the base unit at a time.
- Locate your cellular phone near the base unit. If the cellular phone is too close to the base unit during a cellular call, you may hear noise. For best performance, we recommend placing the cellular phone between 0.6 m to 3m (2 feet to 10 feet) away from the base unit.
- For more details and the list of compatible cellular phones, Refer to our Cell Phone Compatibility List.
- Before pairing a Bluetooth enabled cellular phone to the base unit, make sure that no other Bluetooth device such as a Bluetooth headset is connected to your cellular phone.
- On the Handset:
For CELL 1: Press [MENU # 6 2 4 1]
For CELL 2: Press [MENU # 6 2 4 2]- After the CELL 1 or CELL 2 indicator on the base unit starts flashing, the rest of the procedure must be completed within 5 minutes.
- Your cellular phone:
While the corresponding CELL indicator is flashing, follow the instructions of your cellular phone to enter the pairing mode.- Depending on your cellular phone, it may ask you to enter the Bluetooth PIN (default: “0000”). If your cellular phone shows PassKey confirmation on its display, follow the directions to proceed.
- On the Handset:
Wait until a long beep sounds.- It may take more than 10 seconds to complete pairing.
- When the corresponding CELL indicator lights up, the cellular phone is connected to the base unit. You are ready to make cellular calls.
- Press [OFF].
Notes:
- Make sure that your cellular phone is set to connect to this product automatically. Refer to your cellular phones operating instructions.
- Make sure you cancel your cellular phones current pairing if you want to pair it to the other line.
View the Operating Manual for KX-TG784 for more Link to Cell features.
Model KX-TG785SK
Important
- Your cellular phone must support the Hands Free Profile (HFP) specification.
- You may pair 2 cellular phones and 1 headset. Only 2 Bluetooth devices can be used with the unit at the same time (for example, 2 cellular lines, or the headset and 1 cellular line). You cannot use a Bluetooth headset to talk on a cellular line.
- The unit can be used to talk on 2 lines at the same time (for example, 2 cellular lines,or the landline and 1 cellular line).
- Locate your cellular phone near the base unit. If the cellular phone is too close to the base unit during a cellular call, you may hear noise. For best performance, we recommend placing the cellular phone between 0.6 m to 3 m (2 feet to 10 feet) away from the base unit.
- For more details and the list of compatible cellular phones, Refer to our Cell Phone Compatibility List.
- Before pairing a Bluetooth enabled cellular phone to the base unit, make sure that no other Bluetooth device such as a Bluetooth headset is connected to your cellular phone.
- Base unit:
Press and hold [CELL 1] or [CELL 2] for about 5 seconds. After the corresponding CELL indicator on the base unit starts flashing, the rest of the procedure must be completed within 5 minutes. - Your cellular phone:
While the corresponding CELL indicator is flashing, follow the instructions of your cellular phone to enter the pairing mode. Depending on your cellular phone, it may ask you to enter the Bluetooth PIN (default: “0000”). If your cellular phone shows PassKey confirmation on its display, tap [OK] or otherwise to accept the pairing request. - Base unit:
Wait until a long beep sounds. It may take more than 10 seconds to complete pairing. When the corresponding CELL indicator lights up, the cellular phone is connected to the base unit.
You are ready to make cellular calls. - Press [EXIT].
View an example video of this programming on our YouTube Channel.
Notes:
- If the cellular phone has already paired to the base unit, it is overwritten.
- Make sure that your cellular phone is set to connect to this product automatically. Refer to your cellular phones operating instructions.
- Make sure you cancel your cellular phones current pairing if you want to pair it to the other line.
- The default setting for the alert (text message alert) feature is “On”, so when you pair your cellular phone to the base unit, this feature may be activated. (This depends on the version and type of cellular phone you are using.)
View the Operating Manual for more Link to Cell features.
Models that begin with KX-TG787
Important
- Your cellular phone must support the Hands Free Profile (HFP) specification.
- Up to 2 cellular phones can be registered. However, only one Bluetooth device (cellular phone or headset) can be connected to the base unit at a time.
- Locate your cellular phone near the base unit. If the cellular phone is too close to the base unit during a cellular call, you may hear noise. For best performance, we recommend placing the cellular phone between 0.6 m to 3m (2 feet to 10 feet) away from the base unit.
- For more details and the list of compatible cellular phones, Refer to our Cell Phone Compatibility List.
- Before pairing a Bluetooth enabled cellular phone to the base unit, make sure that no other Bluetooth device such as a Bluetooth headset is connected to your cellular phone.
- On the Handset:
For CELL 1: Press [MENU # 6 2 4 1]
For CELL 2: Press [MENU # 6 2 4 2]- After the CELL 1 or CELL 2 indicator on the base unit starts flashing, the rest of the procedure must be completed within 5 minutes.
- Your cellular phone:
While the corresponding CELL indicator is flashing, follow the instructions of your cellular phone to enter the pairing mode.- Depending on your cellular phone, it may ask you to enter the Bluetooth PIN (default: “0000”). If your cellular phone shows PassKey confirmation on its display, follow the directions to proceed.
- On the Handset:
Wait until a long beep sounds.- It may take more than 10 seconds to complete pairing.
- When the corresponding CELL indicator lights up, the cellular phone is connected to the base unit. You are ready to make cellular calls.
- Press [OFF].
Notes:
- Make sure that your cellular phone is set to connect to this product automatically. Refer to your cellular phones operating instructions.
- Make sure you cancel your cellular phones current pairing if you want to pair it to the other line.
View the Operating Manual for KX-TG787 for more Link to Cell features.
Models KX-TG833SK
Important
- Your cellular phone must support the Hands Free Profile (HFP) specification.
- You may pair 2 cellular phones and 1 headset. Only 2 Bluetooth devices can be used with the unit at the same time (for example, 2 cellular lines, or the headset and 1 cellular line). You cannot use a Bluetooth headset to talk on a cellular line.
- The unit can be used to talk on 2 lines at the same time (for example, 2 cellular lines,or the landline and 1 cellular line).
- Locate your cellular phone near the base unit. If the cellular phone is too close to the base unit during a cellular call, you may hear noise. For best performance, we recommend placing the cellular phone between 0.6 m to 3 m (2 feet to 10 feet) away from the base unit.
- For more details and the list of compatible cellular phones, Refer to our Cell Phone Compatibility List.
- Before pairing a Bluetooth enabled cellular phone to the base unit, make sure that no other Bluetooth device such as a Bluetooth headset is connected to your cellular phone.
- Base unit:
Press and hold [CELL 1] or [CELL 2] for about 5 seconds. After the corresponding CELL indicator on the base unit starts flashing, the rest of the procedure must be completed within 5 minutes. - Your cellular phone:
While the corresponding CELL indicator is flashing, follow the instructions of your cellular phone to enter the pairing mode. Depending on your cellular phone, it may ask you to enter the Bluetooth PIN (default: “0000”). If your cellular phone shows PassKey confirmation on its display, tap [OK] or otherwise to accept the pairing request. - Base unit:
Wait until a long beep sounds. It may take more than 10 seconds to complete pairing. When the corresponding CELL indicator lights up, the cellular phone is connected to the base unit.
You are ready to make cellular calls. - Press [EXIT].
View an example video of this programming on our YouTube Channel.
Notes:
- If the cellular phone has already paired to the base unit, it is overwritten.
- Make sure that your cellular phone is set to connect to this product automatically. Refer to your cellular phones operating instructions.
- Make sure you cancel your cellular phones current pairing if you want to pair it to the other line.
- The default setting for the alert (text message alert) feature is “On”, so when you pair your cellular phone to the base unit, this feature may be activated. (This depends on the version and type of cellular phone you are using.)
View the Operating Manual for KX-TG833SK for more Link to Cell features.
Models KX-TG865SK, KX-TG885SK
- Your cellular phone must support the Hands Free Profile (HFP) specification.
- Up to 2 cellular phones and 1 Bluetooth headset can be paired. However, only one Bluetooth device (cellular phone or headset) can be connected to the base unit at a time.
- Locate your cellular phone near the base unit. If the cellular phone is too close to the base unit during a cellular call, you may hear noise. For best performance, we recommend placing the cellular phone between 0.6 m to 3m (2 feet to 10 feet) away from the base unit.
- For more details and the list of compatible cellular phones, Refer to our Cell Phone Compatibility List.
- Before pairing a Bluetooth enabled cellular phone to the base unit, make sure that no other Bluetooth device such as a Bluetooth headset is connected to your cellular phone.
- Base unit:
Press and hold [CELL 1] or [CELL 2] for about 5 seconds. After the corresponding CELL indicator on the base unit starts flashing, the rest of the procedure must be completed within 5 minutes. - Your cellular phone:
While the corresponding CELL indicator is flashing, follow the instructions of your cellular phone to enter the pairing mode. Depending on your cellular phone, it may ask you to enter the Bluetooth PIN (default: “0000”). If your cellular phone shows PassKey confirmation on its display, tap [OK] or otherwise to accept the pairing request. - Base unit:
Wait until a long beep sounds. It may take more than 10 seconds to complete pairing. When the corresponding CELL indicator lights up, the cellular phone is connected to the base unit.
You are ready to make cellular calls. - Press [EXIT].
View an example video of this programming on our YouTube Channel.
Notes:
- If the cellular phone has already paired to the base unit, it is overwritten.
- Make sure that your cellular phone is set to connect to this product automatically. Refer to your cellular phones operating instructions.
- Make sure you cancel your cellular phones current pairing if you want to pair it to the other line.
- The default setting for the alert (text message alert) feature is “On”, so when you pair your cellular phone to the base unit, this feature may be activated. (This depends on the version and type of cellular phone you are using.)
View the Operating Manual for KX-TG865SK for more Link to Cell features.
View the Operating Manual for KX-TG885SK for more Link to Cell features.
For models that start with KX-TG954 or KX-TG955
Important
- Your cellular phone must support the Hands Free Profile (HFP) specification.
- You may pair a maximum of 4 cellular phones and 1 headset. However, the base unit allows only one Bluetooth to be active at a time.
- Locate your cellular phone near the base unit. If the cellular phone is too close to the base unit during a cellular call, you may hear noise. For best performance, we recommend placing the cellular phone between 0.6 m to 3m (2 feet to 10 feet) away from the base unit.
- For more details and the list of compatible cellular phones, Refer to our Cell Phone Compatibility List.
- Before pairing a Bluetooth enabled cellular phone to the base unit, make sure that no other Bluetooth device such as a Bluetooth headset is connected to your cellular phone.
- On the Handset:
For CELL 1: Press [MENU # 6 2 4 1]
For CELL 2: Press [MENU # 6 2 4 2]
For CELL 3: Press [MENU # 6 2 4 3]
For CELL 4: Press [MENU # 6 2 4 4]
- After the corresponding CELL indicator on the base unit starts flashing, the rest of the procedure must be completed within 5 minutes.
- Your cellular phone:
While the corresponding CELL indicator is flashing, follow the instructions of your cellular phone to enter the pairing mode.- Depending on your cellular phone, it may ask you to enter the Bluetooth PIN (default: “0000”). If your cellular phone shows PassKey confirmation on its display, follow the directions to proceed.
- On the Handset:
Wait until a long beep sounds.- It may take more than 10 seconds to complete pairing.
- When the corresponding CELL indicator lights up, the cellular phone is connected to the base unit. You are ready to make cellular calls.
- Press [OFF].
Notes:
- Make sure that your cellular phone is set to connect to this product automatically. Refer to your cellular phones operating instructions.
- Make sure you cancel your cellular phones current pairing if you want to pair it to the other line.
View the Operating Manual for more Link to Cell features.
Models KX-TG985SK or KX-TG994SK
- Your cellular phone must support the Hands Free Profile (HFP) specification.
- Up to 2 cellular phones and 1 Bluetooth headset can be paired. However, only one Bluetooth device (cellular phone or headset) can be connected to the base unit at a time.
- Locate your cellular phone near the base unit. If the cellular phone is too close to the base unit during a cellular call, you may hear noise. For best performance, we recommend placing the cellular phone between 0.6 m to 3m (2 feet to 10 feet) away from the base unit.
- For more details and the list of compatible cellular phones, Refer to our Cell Phone Compatibility List.
- Before pairing a Bluetooth enabled cellular phone to the base unit, make sure that no other Bluetooth device such as a Bluetooth headset is connected to your cellular phone.
- Base unit:
Press and hold [CELL 1] or [CELL 2] for about 5 seconds. After the corresponding CELL indicator on the base unit starts flashing, the rest of the procedure must be completed within 5 minutes. - Your cellular phone:
While the corresponding CELL indicator is flashing, follow the instructions of your cellular phone to enter the pairing mode. Depending on your cellular phone, it may ask you to enter the Bluetooth PIN (default: “0000”). If your cellular phone shows PassKey confirmation on its display, tap [OK] or otherwise to accept the pairing request. - Base unit:
Wait until a long beep sounds. It may take more than 10 seconds to complete pairing. When the corresponding CELL indicator lights up, the cellular phone is connected to the base unit.
You are ready to make cellular calls. - Press [EXIT].
View an example video of this programming on our YouTube Channel.
Notes:
- If the cellular phone has already paired to the base unit, it is overwritten.
- Make sure that your cellular phone is set to connect to this product automatically. Refer to your cellular phones operating instructions.
- Make sure you cancel your cellular phones current pairing if you want to pair it to the other line.
- The default setting for the alert (text message alert) feature is “On”, so when you pair your cellular phone to the base unit, this feature may be activated. (This depends on the version and type of cellular phone you are using.)
View the Operating Manual for KX-TG985SK for more Link to Cell features.
View the Operating Manual for KX-TG994SK for more Link to Cell features.
For models that start with KX-TGD56, KX-TGD58 or KX-TGD59
Important
- Your cellular phone must support the Hands Free Profile (HFP) specification.
- You may pair 2 cellular phones and 1 headset. Only 2 Bluetooth devices can be used with the unit at the same time (for example, 2 cellular lines, or the headset and 1 cellular line). You cannot use a Bluetooth headset to talk on a cellular line.
- The unit can be used to talk on 2 lines at the same time (for example, 2 cellular lines,or the landline and 1 cellular line).
- Locate your cellular phone near the base unit. If the cellular phone is too close to the base unit during a cellular call, you may hear noise. For best performance, we recommend placing the cellular phone between 0.6 m to 3 m (2 feet to 10 feet) away from the base unit.
- For more details and the list of compatible cellular phones, Refer to our Cell Phone Compatibility List.
- Before pairing a Bluetooth enabled cellular phone to the base unit, make sure that no other Bluetooth device such as a Bluetooth headset is connected to your cellular phone.
- Base unit:
Press and hold [CELL 1] or [CELL 2] for about 5 seconds. After the corresponding CELL indicator on the base unit starts flashing, the rest of the procedure must be completed within 5 minutes. - Your cellular phone:
While the corresponding CELL indicator is flashing, follow the instructions of your cellular phone to enter the pairing mode. Depending on your cellular phone, it may ask you to enter the Bluetooth PIN (default: “0000”). If your cellular phone shows PassKey confirmation on its display, tap [OK] or otherwise to accept the pairing request. - Base unit:
Wait until a long beep sounds. It may take more than 10 seconds to complete pairing. When the corresponding CELL indicator lights up, the cellular phone is connected to the base unit.
You are ready to make cellular calls. - Press [EXIT].
View an example video of this programming on our YouTube Channel.
Notes:
- If the cellular phone has already paired to the base unit, it is overwritten.
- Make sure that your cellular phone is set to connect to this product automatically. Refer to your cellular phones operating instructions.
- Make sure you cancel your cellular phones current pairing if you want to pair it to the other line.
- The default setting for the alert (text message alert) feature is “On”, so when you pair your cellular phone to the base unit, this feature may be activated. (This depends on the version and type of cellular phone you are using.)
View the Operating Manual for KX-TGD56 series for more Link to Cell features.
View the Operating Manual for KX-TGD58 for more Link to Cell features.
View the Operating Manual for KX-TGD59 for more Link to Cell features.
Model KX-TGD663, KX-TGD664
Important
- Your cellular phone must support the Hands Free Profile (HFP) specification.
- You may pair 2 cellular phones and 1 headset. Only 2 Bluetooth devices can be used with the unit at the same time (for example, 2 cellular lines, or the headset and 1 cellular line). You cannot use a Bluetooth headset to talk on a cellular line.
- The unit can be used to talk on 2 lines at the same time (for example, 2 cellular lines,or the landline and 1 cellular line).
- Locate your cellular phone near the base unit. If the cellular phone is too close to the base unit during a cellular call, you may hear noise. For best performance, we recommend placing the cellular phone between 0.6 m to 3 m (2 feet to 10 feet) away from the base unit.
- For more details and the list of compatible cellular phones, Refer to our Cell Phone Compatibility List.
- Before pairing a Bluetooth enabled cellular phone to the base unit, make sure that no other Bluetooth device such as a Bluetooth headset is connected to your cellular phone.
- Base unit:
Press and hold [CELL 1] or [CELL 2] for about 5 seconds. After the corresponding CELL indicator on the base unit starts flashing, the rest of the procedure must be completed within 5 minutes. - Your cellular phone:
While the corresponding CELL indicator is flashing, follow the instructions of your cellular phone to enter the pairing mode. Depending on your cellular phone, it may ask you to enter the Bluetooth PIN (default: “0000”). If your cellular phone shows PassKey confirmation on its display, tap [OK] or otherwise to accept the pairing request. - Base unit:
Wait until a long beep sounds. It may take more than 10 seconds to complete pairing. When the corresponding CELL indicator lights up, the cellular phone is connected to the base unit.
You are ready to make cellular calls. - Press [EXIT].
View an example video of this programming on our YouTube Channel.
Notes:
- If the cellular phone has already paired to the base unit, it is overwritten.
- Make sure that your cellular phone is set to connect to this product automatically. Refer to your cellular phones operating instructions.
- Make sure you cancel your cellular phones current pairing if you want to pair it to the other line.
- The default setting for the alert (text message alert) feature is “On”, so when you pair your cellular phone to the base unit, this feature may be activated. (This depends on the version and type of cellular phone you are using.)
View the Operating Manual for more Link to Cell features.
Model KX-TGD862, KX-TGD863, KX-TGD864
- Your cellular phone must support the Hands Free Profile (HFP) specification.
- Up to 2 cellular phones and 1 Bluetooth headset can be paired. However, only one Bluetooth device (cellular phone or headset) can be connected to the base unit at a time.
- Locate your cellular phone near the base unit. If the cellular phone is too close to the base unit during a cellular call, you may hear noise. For best performance, we recommend placing the cellular phone between 0.6 m to 3m (2 feet to 10 feet) away from the base unit.
- For more details and the list of compatible cellular phones, Refer to our Cell Phone Compatibility List.
- Before pairing a Bluetooth enabled cellular phone to the base unit, make sure that no other Bluetooth device such as a Bluetooth headset is connected to your cellular phone.
- Base unit:
Press and hold [CELL 1] or [CELL 2] for about 5 seconds. After the corresponding CELL indicator on the base unit starts flashing, the rest of the procedure must be completed within 5 minutes. - Your cellular phone:
While the corresponding CELL indicator is flashing, follow the instructions of your cellular phone to enter the pairing mode. Depending on your cellular phone, it may ask you to enter the Bluetooth PIN (default: “0000”). If your cellular phone shows PassKey confirmation on its display, tap [OK] or otherwise to accept the pairing request. - Base unit:
Wait until a long beep sounds. It may take more than 10 seconds to complete pairing. When the corresponding CELL indicator lights up, the cellular phone is connected to the base unit.
You are ready to make cellular calls. - Press [EXIT].
View an example video of this programming on our YouTube Channel.
Notes:
- If the cellular phone has already paired to the base unit, it is overwritten.
- Make sure that your cellular phone is set to connect to this product automatically. Refer to your cellular phones operating instructions.
- Make sure you cancel your cellular phones current pairing if you want to pair it to the other line.
- The default setting for the alert (text message alert) feature is “On”, so when you pair your cellular phone to the base unit, this feature may be activated. (This depends on the version and type of cellular phone you are using.)
View the Operating Manual for more Link to Cell features.
For models that start with KX-TGE26 and KX-TGE27
Important
- Your cellular phone must support the Hands Free Profile (HFP) specification.
- You may pair 2 cellular phones and 1 headset. Only 2 Bluetooth devices can be used with the unit at the same time (for example, 2 cellular lines, or the headset and 1 cellular line). You cannot use a Bluetooth headset to talk on a cellular line.
- The unit can be used to talk on 2 lines at the same time (for example, 2 cellular lines,or the landline and 1 cellular line).
- Locate your cellular phone near the base unit. If the cellular phone is too close to the base unit during a cellular call, you may hear noise. For best performance, we recommend placing the cellular phone between 0.6 m to 3 m (2 feet to 10 feet) away from the base unit.
- For more details and the list of compatible cellular phones, Refer to our Cell Phone Compatibility List.
- Before pairing a Bluetooth enabled cellular phone to the base unit, make sure that no other Bluetooth device such as a Bluetooth headset is connected to your cellular phone.
- On the Handset:
For CELL 1: Press [MENU # 6 2 4 1]
For CELL 2: Press [MENU # 6 2 4 2]- After the CELL 1 or CELL 2 indicator on the base unit starts flashing, the rest of the procedure must be completed within 5 minutes.
- Your cellular phone:
While the corresponding CELL indicator is flashing, follow the instructions of your cellular phone to enter the pairing mode.- Depending on your cellular phone, it may ask you to enter the Bluetooth PIN (default: “0000”). If your cellular phone shows PassKey confirmation on its display, follow the directions to proceed.
- On the Handset:
Wait until a long beep sounds.- It may take more than 10 seconds to complete pairing.
- When the corresponding CELL indicator lights up, the cellular phone is connected to the base unit. You are ready to make cellular calls.
- Press [OFF].
Notes:
- Make sure that your cellular phone is set to connect to this product automatically. Refer to your cellular phones operating instructions.
- Make sure you cancel your cellular phones current pairing if you want to pair it to the other line.
View the Operating Manual for more Link to Cell features.
For models that start with KX-TGE46, KX-TGE47, KX-TGE484S2
Important
- Your cellular phone must support the Hands Free Profile (HFP) specification.
- You may pair 2 cellular phones and 1 headset. Only 2 Bluetooth devices can be used with the unit at the same time (for example, 2 cellular lines, or the headset and 1 cellular line). You cannot use a Bluetooth headset to talk on a cellular line.
- The unit can be used to talk on 2 lines at the same time (for example, 2 cellular lines,or the landline and 1 cellular line).
- Locate your cellular phone near the base unit. If the cellular phone is too close to the base unit during a cellular call, you may hear noise. For best performance, we recommend placing the cellular phone between 0.6 m to 3 m (2 feet to 10 feet) away from the base unit.
- For more details and the list of compatible cellular phones, Refer to our Cell Phone Compatibility List.
- Before pairing a Bluetooth enabled cellular phone to the base unit, make sure that no other Bluetooth device such as a Bluetooth headset is connected to your cellular phone.
- Base unit:
Press and hold [CELL 1] or [CELL 2] for about 5 seconds. After the corresponding CELL indicator on the base unit starts flashing, the rest of the procedure must be completed within 5 minutes. - Your cellular phone:
While the corresponding CELL indicator is flashing, follow the instructions of your cellular phone to enter the pairing mode. Depending on your cellular phone, it may ask you to enter the Bluetooth PIN (default: “0000”). If your cellular phone shows PassKey confirmation on its display, tap [OK] or otherwise to accept the pairing request. - Base unit:
Wait until a long beep sounds. It may take more than 10 seconds to complete pairing. When the corresponding CELL indicator lights up, the cellular phone is connected to the base unit.
You are ready to make cellular calls. - Press [EXIT].
View an example video of this programming on our YouTube Channel.
Notes:
- If the cellular phone has already paired to the base unit, it is overwritten.
- Make sure that your cellular phone is set to connect to this product automatically. Refer to your cellular phones operating instructions.
- Make sure you cancel your cellular phones current pairing if you want to pair it to the other line.
- The default setting for the alert (text message alert) feature is “On”, so when you pair your cellular phone to the base unit, this feature may be activated. (This depends on the version and type of cellular phone you are using.)
View the Operating Manual for more Link to Cell features.
For models that start with KX-TGE66 and KX-TGE67
- Your cellular phone must support the Hands Free Profile (HFP) specification.
- Up to 2 cellular phones and 1 Bluetooth headset can be paired. However, only one Bluetooth device (cellular phone or headset) can be connected to the base unit at a time.
- Locate your cellular phone near the base unit. If the cellular phone is too close to the base unit during a cellular call, you may hear noise. For best performance, we recommend placing the cellular phone between 0.6 m to 3m (2 feet to 10 feet) away from the base unit.
- For more details and the list of compatible cellular phones, Refer to our Cell Phone Compatibility List.
- Before pairing a Bluetooth enabled cellular phone to the base unit, make sure that no other Bluetooth device such as a Bluetooth headset is connected to your cellular phone.
- Base unit:
Press and hold [CELL 1] or [CELL 2] for about 5 seconds. After the corresponding CELL indicator on the base unit starts flashing, the rest of the procedure must be completed within 5 minutes. - Your cellular phone:
While the corresponding CELL indicator is flashing, follow the instructions of your cellular phone to enter the pairing mode. Depending on your cellular phone, it may ask you to enter the Bluetooth PIN (default: “0000”). If your cellular phone shows PassKey confirmation on its display, tap [OK] or otherwise to accept the pairing request. - Base unit:
Wait until a long beep sounds. It may take more than 10 seconds to complete pairing. When the corresponding CELL indicator lights up, the cellular phone is connected to the base unit.
You are ready to make cellular calls. - Press [EXIT].
View an example video of this programming on our YouTube Channel.
Notes:
- If the cellular phone has already paired to the base unit, it is overwritten.
- Make sure that your cellular phone is set to connect to this product automatically. Refer to your cellular phones operating instructions.
- Make sure you cancel your cellular phones current pairing if you want to pair it to the other line.
- The default setting for the alert (text message alert) feature is “On”, so when you pair your cellular phone to the base unit, this feature may be activated. (This depends on the version and type of cellular phone you are using.)
View the Operating Manual for more Link to Cell features.
For models that start with KX-TGF37 or KX-TGF38
Important
- Your cellular phone must support the Hands Free Profile (HFP) specification.
- You may pair 2 cellular phones and 1 headset. Only 2 Bluetooth devices can be used with the unit at the same time (for example, 2 cellular lines, or the headset and 1 cellular line). You cannot use a Bluetooth headset to talk on a cellular line.
- The unit can be used to talk on 2 lines at the same time (for example, 2 cellular lines,or the landline and 1 cellular line).
- Locate your cellular phone near the base unit. If the cellular phone is too close to the base unit during a cellular call, you may hear noise. For best performance, we recommend placing the cellular phone between 0.6 m to 3 m (2 feet to 10 feet) away from the base unit.
- For more details and the list of compatible cellular phones, Refer to our Cell Phone Compatibility List.
- Before pairing a Bluetooth enabled cellular phone to the base unit, make sure that no other Bluetooth device such as a Bluetooth headset is connected to your cellular phone.
- Base unit:
Press and hold [CELL 1] or [CELL 2] for about 5 seconds. After the corresponding CELL indicator on the base unit starts flashing, the rest of the procedure must be completed within 5 minutes. - Your cellular phone:
While the corresponding CELL indicator is flashing, follow the instructions of your cellular phone to enter the pairing mode. Depending on your cellular phone, it may ask you to enter the Bluetooth PIN (default: “0000”). If your cellular phone shows PassKey confirmation on its display, tap [OK] or otherwise to accept the pairing request. - Base unit:
Wait until a long beep sounds. It may take more than 10 seconds to complete pairing. When the corresponding CELL indicator lights up, the cellular phone is connected to the base unit.
You are ready to make cellular calls. - Press [EXIT].
View an example video of this programming on our YouTube Channel.
Notes:
- If the cellular phone has already paired to the base unit, it is overwritten.
- Make sure that your cellular phone is set to connect to this product automatically. Refer to your cellular phones operating instructions.
- Make sure you cancel your cellular phones current pairing if you want to pair it to the other line.
- The default setting for the alert (text message alert) feature is “On”, so when you pair your cellular phone to the base unit, this feature may be activated. (This depends on the version and type of cellular phone you are using.)
View the Operating Manual for KX-TGF37 series for more Link to Cell features.
View the Operating Manual for KX-TGF38 for more Link to Cell features.
For models that start with KX-TGF57
Important
- Your cellular phone must support the Hands Free Profile (HFP) specification.
- You may pair 2 cellular phones and 1 headset. Only 2 Bluetooth devices can be used with the unit at the same time (for example, 2 cellular lines, or the headset and 1 cellular line). You cannot use a Bluetooth headset to talk on a cellular line.
- The unit can be used to talk on 2 lines at the same time (for example, 2 cellular lines,or the landline and 1 cellular line).
- Locate your cellular phone near the base unit. If the cellular phone is too close to the base unit during a cellular call, you may hear noise. For best performance, we recommend placing the cellular phone between 0.6 m to 3 m (2 feet to 10 feet) away from the base unit.
- For more details and the list of compatible cellular phones, Refer to our Cell Phone Compatibility List.
- Before pairing a Bluetooth enabled cellular phone to the base unit, make sure that no other Bluetooth device such as a Bluetooth headset is connected to your cellular phone.
- Base unit:
Press and hold [CELL 1] or [CELL 2] for about 5 seconds. After the corresponding CELL indicator on the base unit starts flashing, the rest of the procedure must be completed within 5 minutes. - Your cellular phone:
While the corresponding CELL indicator is flashing, follow the instructions of your cellular phone to enter the pairing mode. Depending on your cellular phone, it may ask you to enter the Bluetooth PIN (default: “0000”). If your cellular phone shows PassKey confirmation on its display, tap [OK] or otherwise to accept the pairing request. - Base unit:
Wait until a long beep sounds. It may take more than 10 seconds to complete pairing. When the corresponding CELL indicator lights up, the cellular phone is connected to the base unit.
You are ready to make cellular calls. - Press [EXIT].
View an example video of this programming on our YouTube Channel.
Notes:
- If the cellular phone has already paired to the base unit, it is overwritten.
- Make sure that your cellular phone is set to connect to this product automatically. Refer to your cellular phones operating instructions.
- Make sure you cancel your cellular phones current pairing if you want to pair it to the other line.
- The default setting for the alert (text message alert) feature is “On”, so when you pair your cellular phone to the base unit, this feature may be activated. (This depends on the version and type of cellular phone you are using.)
View the Operating Manual for more Link to Cell features.
For models that start with KX-TGF675
- Your cellular phone must support the Hands Free Profile (HFP) specification.
- Up to 2 cellular phones and 1 Bluetooth headset can be paired. However, only one Bluetooth device (cellular phone or headset) can be connected to the base unit at a time.
- Locate your cellular phone near the base unit. If the cellular phone is too close to the base unit during a cellular call, you may hear noise. For best performance, we recommend placing the cellular phone between 0.6 m to 3m (2 feet to 10 feet) away from the base unit.
- For more details and the list of compatible cellular phones, Refer to our Cell Phone Compatibility List.
- Before pairing a Bluetooth enabled cellular phone to the base unit, make sure that no other Bluetooth device such as a Bluetooth headset is connected to your cellular phone.
- Base unit:
Press and hold [CELL 1] or [CELL 2] for about 5 seconds. After the corresponding CELL indicator on the base unit starts flashing, the rest of the procedure must be completed within 5 minutes. - Your cellular phone:
While the corresponding CELL indicator is flashing, follow the instructions of your cellular phone to enter the pairing mode. Depending on your cellular phone, it may ask you to enter the Bluetooth PIN (default: “0000”). If your cellular phone shows PassKey confirmation on its display, tap [OK] or otherwise to accept the pairing request. - Base unit:
Wait until a long beep sounds. It may take more than 10 seconds to complete pairing. When the corresponding CELL indicator lights up, the cellular phone is connected to the base unit.
You are ready to make cellular calls. - Press [EXIT].
View an example video of this programming on our YouTube Channel.
Notes:
- If the cellular phone has already paired to the base unit, it is overwritten.
- Make sure that your cellular phone is set to connect to this product automatically. Refer to your cellular phones operating instructions.
- Make sure you cancel your cellular phones current pairing if you want to pair it to the other line.
- The default setting for the alert (text message alert) feature is “On”, so when you pair your cellular phone to the base unit, this feature may be activated. (This depends on the version and type of cellular phone you are using.)
View the Operating Manual for more Link to Cell features.
For models that start with KX-TGF77
- Your cellular phone must support the Hands Free Profile (HFP) specification.
- Up to 2 cellular phones and 1 Bluetooth headset can be paired. However, only one Bluetooth device (cellular phone or headset) can be connected to the base unit at a time.
- Locate your cellular phone near the base unit. If the cellular phone is too close to the base unit during a cellular call, you may hear noise. For best performance, we recommend placing the cellular phone between 0.6 m to 3m (2 feet to 10 feet) away from the base unit.
- For more details and the list of compatible cellular phones, Refer to our Cell Phone Compatibility List.
- Before pairing a Bluetooth enabled cellular phone to the base unit, make sure that no other Bluetooth device such as a Bluetooth headset is connected to your cellular phone.
- Base unit:
Press and hold [CELL 1] or [CELL 2] for about 5 seconds. After the corresponding CELL indicator on the base unit starts flashing, the rest of the procedure must be completed within 5 minutes. - Your cellular phone:
While the corresponding CELL indicator is flashing, follow the instructions of your cellular phone to enter the pairing mode. Depending on your cellular phone, it may ask you to enter the Bluetooth PIN (default: “0000”). If your cellular phone shows PassKey confirmation on its display, tap [OK] or otherwise to accept the pairing request. - Base unit:
Wait until a long beep sounds. It may take more than 10 seconds to complete pairing. When the corresponding CELL indicator lights up, the cellular phone is connected to the base unit.
You are ready to make cellular calls. - Press [EXIT].
View an example video of this programming on our YouTube Channel.
Notes:
- If the cellular phone has already paired to the base unit, it is overwritten.
- Make sure that your cellular phone is set to connect to this product automatically. Refer to your cellular phones operating instructions.
- Make sure you cancel your cellular phones current pairing if you want to pair it to the other line.
- The default setting for the alert (text message alert) feature is “On”, so when you pair your cellular phone to the base unit, this feature may be activated. (This depends on the version and type of cellular phone you are using.)
View the Operating Manual for KX-TGF77 for more Link to Cell features.
For models that start with KX-TGF882
- Your cellular phone must support the Hands Free Profile (HFP) specification.
- Up to 2 cellular phones and 1 Bluetooth headset can be paired. However, only one Bluetooth device (cellular phone or headset) can be connected to the base unit at a time.
- Locate your cellular phone near the base unit. If the cellular phone is too close to the base unit during a cellular call, you may hear noise. For best performance, we recommend placing the cellular phone between 0.6 m to 3m (2 feet to 10 feet) away from the base unit.
- For more details and the list of compatible cellular phones, Refer to our Cell Phone Compatibility List.
- Before pairing a Bluetooth enabled cellular phone to the base unit, make sure that no other Bluetooth device such as a Bluetooth headset is connected to your cellular phone.
- Base unit:
Press and hold [CELL 1] or [CELL 2] for about 5 seconds. After the corresponding CELL indicator on the base unit starts flashing, the rest of the procedure must be completed within 5 minutes. - Your cellular phone:
While the corresponding CELL indicator is flashing, follow the instructions of your cellular phone to enter the pairing mode. Depending on your cellular phone, it may ask you to enter the Bluetooth PIN (default: “0000”). If your cellular phone shows PassKey confirmation on its display, tap [OK] or otherwise to accept the pairing request. - Base unit:
Wait until a long beep sounds. It may take more than 10 seconds to complete pairing. When the corresponding CELL indicator lights up, the cellular phone is connected to the base unit.
You are ready to make cellular calls. - Press [EXIT].
View an example video of this programming on our YouTube Channel.
Notes:
- Make sure that your cellular phone is set to connect to this product automatically. Refer to your cellular phones operating instructions.
- Make sure you cancel your cellular phones current pairing if you want to pair it to the other line.
View the Operating Manual for KX-TGF882 for more Link to Cell features.
For models that start with KX-TGF973
- Your cellular phone must support the Hands Free Profile (HFP) specification.
- Up to 2 cellular phones and 1 Bluetooth headset can be paired. However, only one Bluetooth device (cellular phone or headset) can be connected to the base unit at a time.
- Locate your cellular phone near the base unit. If the cellular phone is too close to the base unit during a cellular call, you may hear noise. For best performance, we recommend placing the cellular phone between 0.6 m to 3m (2 feet to 10 feet) away from the base unit.
- For more details and the list of compatible cellular phones, Refer to our Cell Phone Compatibility List.
- Before pairing a Bluetooth enabled cellular phone to the base unit, make sure that no other Bluetooth device such as a Bluetooth headset is connected to your cellular phone.
- Base unit:
Press and hold [CELL 1] or [CELL 2] for about 5 seconds. After the corresponding CELL indicator on the base unit starts flashing, the rest of the procedure must be completed within 5 minutes. - Your cellular phone:
While the corresponding CELL indicator is flashing, follow the instructions of your cellular phone to enter the pairing mode. Depending on your cellular phone, it may ask you to enter the Bluetooth PIN (default: “0000”). If your cellular phone shows PassKey confirmation on its display, tap [OK] or otherwise to accept the pairing request. - Base unit:
Wait until a long beep sounds. It may take more than 10 seconds to complete pairing. When the corresponding CELL indicator lights up, the cellular phone is connected to the base unit.
You are ready to make cellular calls. - Press [EXIT].
View an example video of this programming on our YouTube Channel.
Notes:
- If the cellular phone has already paired to the base unit, it is overwritten.
- Make sure that your cellular phone is set to connect to this product automatically. Refer to your cellular phones operating instructions.
- Make sure you cancel your cellular phones current pairing if you want to pair it to the other line.
- The default setting for the alert (text message alert) feature is “On”, so when you pair your cellular phone to the base unit, this feature may be activated. (This depends on the version and type of cellular phone you are using.)
View the Operating Manual for KX-TGF973 for more Link to Cell features.
For models that start with KX-TGF975
- Your cellular phone must support the Hands Free Profile (HFP) specification.
- Up to 2 cellular phones and 1 Bluetooth headset can be paired. However, only one Bluetooth device (cellular phone or headset) can be connected to the base unit at a time.
- Locate your cellular phone near the base unit. If the cellular phone is too close to the base unit during a cellular call, you may hear noise. For best performance, we recommend placing the cellular phone between 0.6 m to 3m (2 feet to 10 feet) away from the base unit.
- For more details and the list of compatible cellular phones, Refer to our Cell Phone Compatibility List.
- Before pairing a Bluetooth enabled cellular phone to the base unit, make sure that no other Bluetooth device such as a Bluetooth headset is connected to your cellular phone.
- Base unit:
Press and hold [CELL 1] or [CELL 2] for about 5 seconds. After the corresponding CELL indicator on the base unit starts flashing, the rest of the procedure must be completed within 5 minutes. - Your cellular phone:
While the corresponding CELL indicator is flashing, follow the instructions of your cellular phone to enter the pairing mode. Depending on your cellular phone, it may ask you to enter the Bluetooth PIN (default: “0000”). If your cellular phone shows PassKey confirmation on its display, tap [OK] or otherwise to accept the pairing request. - Base unit:
Wait until a long beep sounds. It may take more than 10 seconds to complete pairing. When the corresponding CELL indicator lights up, the cellular phone is connected to the base unit.
You are ready to make cellular calls. - Press [EXIT].
View an example video of this programming on our YouTube Channel.
Notes:
- If the cellular phone has already paired to the base unit, it is overwritten.
- Make sure that your cellular phone is set to connect to this product automatically. Refer to your cellular phones operating instructions.
- Make sure you cancel your cellular phones current pairing if you want to pair it to the other line.
- The default setting for the alert (text message alert) feature is “On”, so when you pair your cellular phone to the base unit, this feature may be activated. (This depends on the version and type of cellular phone you are using.)
View the Operating Manual for KX-TGF975 for more Link to Cell features.
For models that start with KX-TGH26
Important
- Your cellular phone must support the Hands Free Profile (HFP) specification.
- You may pair 2 cellular phones and 1 headset. Only 2 Bluetooth devices can be used with the unit at the same time (for example, 2 cellular lines, or the headset and 1 cellular line). You cannot use a Bluetooth headset to talk on a cellular line.
- The unit can be used to talk on 2 lines at the same time (for example, 2 cellular lines,or the landline and 1 cellular line).
- Locate your cellular phone near the base unit. If the cellular phone is too close to the base unit during a cellular call, you may hear noise. For best performance, we recommend placing the cellular phone between 0.6 m to 3 m (2 feet to 10 feet) away from the base unit.
- For more details and the list of compatible cellular phones, Refer to our Cell Phone Compatibility List.
- Before pairing a Bluetooth enabled cellular phone to the base unit, make sure that no other Bluetooth device such as a Bluetooth headset is connected to your cellular phone.
- On the Handset:
For CELL 1: Press [MENU # 6 2 4 1]
For CELL 2: Press [MENU # 6 2 4 2]- After the CELL 1 or CELL 2 indicator on the base unit starts flashing, the rest of the procedure must be completed within 5 minutes.
- Your cellular phone:
While the corresponding CELL indicator is flashing, follow the instructions of your cellular phone to enter the pairing mode.- Depending on your cellular phone, it may ask you to enter the Bluetooth PIN (default: “0000”). If your cellular phone shows PassKey confirmation on its display, follow the directions to proceed.
- On the Handset:
Wait until a long beep sounds.- It may take more than 10 seconds to complete pairing.
- When the corresponding CELL indicator lights up, the cellular phone is connected to the base unit. You are ready to make cellular calls.
- Press [OFF].
Notes:
- Make sure that your cellular phone is set to connect to this product automatically. Refer to your cellular phones operating instructions.
- Make sure you cancel your cellular phones current pairing if you want to pair it to the other line.
View the Operating Manual for more Link to Cell features.
For models that start with KX-TGL46
Important
- Your cellular phone must support the Hands Free Profile (HFP) specification.
- You may pair 2 cellular phones and 1 headset. Only 2 Bluetooth devices can be used with the unit at the same time (for example, 2 cellular lines, or the headset and 1 cellular line). You cannot use a Bluetooth headset to talk on a cellular line.
- The unit can be used to talk on 2 lines at the same time (for example, 2 cellular lines,or the landline and 1 cellular line).
- Locate your cellular phone near the base unit. If the cellular phone is too close to the base unit during a cellular call, you may hear noise. For best performance, we recommend placing the cellular phone between 0.6 m to 3 m (2 feet to 10 feet) away from the base unit.
- For more details and the list of compatible cellular phones, Refer to our Cell Phone Compatibility List.
- Before pairing a Bluetooth enabled cellular phone to the base unit, make sure that no other Bluetooth device such as a Bluetooth headset is connected to your cellular phone.
- Base unit:
Press and hold [CELL 1] or [CELL 2] for about 5 seconds. After the corresponding CELL indicator on the base unit starts flashing, the rest of the procedure must be completed within 5 minutes. - Your cellular phone:
While the corresponding CELL indicator is flashing, follow the instructions of your cellular phone to enter the pairing mode. Depending on your cellular phone, it may ask you to enter the Bluetooth PIN (default: “0000”). If your cellular phone shows PassKey confirmation on its display, tap [OK] or otherwise to accept the pairing request. - Base unit:
Wait until a long beep sounds. It may take more than 10 seconds to complete pairing. When the corresponding CELL indicator lights up, the cellular phone is connected to the base unit.
You are ready to make cellular calls. - Press [EXIT].
View an example video of this programming on our YouTube Channel.
Notes:
- If the cellular phone has already paired to the base unit, it is overwritten.
- Make sure that your cellular phone is set to connect to this product automatically. Refer to your cellular phones operating instructions.
- Make sure you cancel your cellular phones current pairing if you want to pair it to the other line.
- The default setting for the alert (text message alert) feature is “On”, so when you pair your cellular phone to the base unit, this feature may be activated. (This depends on the version and type of cellular phone you are using.)
View the Operating Manual for more Link to Cell features.
Model KX-TGM430
Important
- Your cellular phone must support the Hands Free Profile (HFP) specification.
- You may pair 2 cellular phones and 1 headset. Only 2 Bluetooth devices can be used with the unit at the same time (for example, 2 cellular lines, or the headset and 1 cellular line). You cannot use a Bluetooth headset to talk on a cellular line.
- The unit can be used to talk on 2 lines at the same time (for example, 2 cellular lines,or the landline and 1 cellular line).
- Locate your cellular phone near the base unit. If the cellular phone is too close to the base unit during a cellular call, you may hear noise. For best performance, we recommend placing the cellular phone between 0.6 m to 3 m (2 feet to 10 feet) away from the base unit.
- For more details and the list of compatible cellular phones, Refer to our Cell Phone Compatibility List.
- Before pairing a Bluetooth enabled cellular phone to the base unit, make sure that no other Bluetooth device such as a Bluetooth headset is connected to your cellular phone.
- Base unit:
Press and hold [CELL 1] or [CELL 2] for about 5 seconds. After the corresponding CELL indicator on the base unit starts flashing, the rest of the procedure must be completed within 5 minutes. - Your cellular phone:
While the corresponding CELL indicator is flashing, follow the instructions of your cellular phone to enter the pairing mode. Depending on your cellular phone, it may ask you to enter the Bluetooth PIN (default: “0000”). If your cellular phone shows PassKey confirmation on its display, tap [OK] or otherwise to accept the pairing request. - Base unit:
Wait until a long beep sounds. It may take more than 10 seconds to complete pairing. When the corresponding CELL indicator lights up, the cellular phone is connected to the base unit.
You are ready to make cellular calls. - Press [EXIT].
View an example video of this programming on our YouTube Channel.
Notes:
- If the cellular phone has already paired to the base unit, it is overwritten.
- Make sure that your cellular phone is set to connect to this product automatically. Refer to your cellular phones operating instructions.
- Make sure you cancel your cellular phones current pairing if you want to pair it to the other line.
- The default setting for the alert (text message alert) feature is “On”, so when you pair your cellular phone to the base unit, this feature may be activated. (This depends on the version and type of cellular phone you are using.)
View the Operating Manual for more Link to Cell features.