How to pair a Bluetooth® Panasonic Audio Stereo or Speaker Product

Model RX-D550

To Pair using the remote control

1. Press the Bluetooth® button, to select " BLUETOOTH ".
   • If “PAIRING” is indicated on the display, go to step 3.
2. Press the [ PLAY MENU ] button to select " PAIRING " and then press [ OK ].
3. Select " RX-D550 " from the Bluetooth® device's Bluetooth® menu.
   • The MAC address (alpha-numerical string that is unique to each set) may be displayed before “RX-D550” is displayed.
   • The name of the connected device is indicated on the display for a few seconds.
4. Start playback on the Bluetooth® device.

To Pair from the main unit

1. Press the Bluetooth® [ -Pairing -PAIRING] button to switch to Bluetooth mode.
2. Press and hold the Bluetooth® [ -Pairing ] button on the unit until " PAIRING " appears.
3. Select " RX-D550 " from the Bluetooth® device's Bluetooth® menu.
   • The MAC address (alpha-numerical string that is unique to each set) may be displayed before “RX-D550” is displayed.
   • The name of the connected device is indicated on the display for a few seconds.
4. Start playback on the Bluetooth® device.

Note

• If prompted for the passkey, input “0000”.
• You can register up to 8 devices with this unit. If a 9th device is paired, the device that has not been used the longest will be replaced.
• This unit can only be connected to one device at a time.
• When “BLUETOOTH” is selected as the source, this unit will automatically try and connect to the last connected Bluetooth® device. (“LINKING” is indicated on the display during this process.) If the connection attempt fails, try to establish a connection again.

Model SC-AKX18

Model SC-AKX640

View the Operating Manual for more Bluetooth® operational functions.

Model SC-BMAX5, SC-BMAX10

You can connect and play an audio device wirelessly through Bluetooth®.

Preparation

• Turn on the unit.
• Turn on the Bluetooth® feature of the device and put the device near the system.
• Read the operating instructions of the Bluetooth® device for details.

Pairing a Device

1. Press the Bluetooth® button. "PAIRING " is shown
2. Select "SC-BMAX10" or "SC-BMAX5" from the Bluetooth® menu of the device. If prompted for a passkey, input "0000". The device connects with this system automatically after pairing is complete.

Notes:

• If a Bluetooth® device is connected, you need to disconnect the device before pairing a new device.
• You can pair up to 8 devices with this system. If a 9th device is paired, the device that has been paired for the longest time will be replaced.
• Depending on the searching functionality of the Bluetooth® device and the surrounding environment, if the product name is not shown on the Bluetooth® menu of the device, turn off and then turn on the Bluetooth® feature of the device repeatedly during the pairing process.

View the Operating Manual for more Bluetooth® operational functions.

Model SC-CMAX5

Model SC-GA10

1. Press the Bluetooth® button. If the Bluetooth® selector blinks fast go to step 3.
2. Press and hold the Bluetooth® [ ] button until the Bluetooth® selector blinks fast.
3. Select " Panasonic GA10 " from the Bluetooth® menu of the device.
   • The MAC address (alpha-numerical string that is unique to each set) may be displayed this unit is displayed.
   • If prompted for the passkey, input “0000”.
   • The device connects with this system automatically after pairing is complete.
4. Start playback on the Bluetooth® device.

Note

• You can register up to 8 devices with this unit. If a 9th device is paired, the device that has not been used the longest will be replaced.
• This unit can only be connected to one device at a time.
• When “BLUETOOTH” is selected as the source, this unit will automatically try and connect to the last connected Bluetooth® device. (“LINKING” is shown during this process.)

Model SC-HC200

Model SC-HC295

Model SC-HC300

Model SC-HC39

Model SC-HC400, SC-HC410

Model SC-HC58

Model SC-HTB580, SC-HTB880

Model SC-HTE180

Model SC-HTE80

Model SC-MAX4700, SC-MAX8700

Model SC-MAX670

Model SC-NE1, SC-NE3, SC-NE5

Models SC-NP10

If this system is connected to a Bluetooth® device, disconnect it.

1. Press the Power button to turn this unit on.
   • The Bluetooth® indicator blinks slowly.
   • If this unit is being used for the first time (factory preset state): The Bluetooth® indicator blinks fast. The unit will enter pairing standby. go to step 3.
2. Press and hold the [ PAIRING ] button until the Bluetooth® indicator blinks fast. The unit will enter pairing standby.
3. Select "strong>SC-NP10 " from the Bluetooth® menu of the device.
   • If prompted for the passkey, input “0000”.
   • The device connects with this system automatically after pairing is complete.
   • The name of the connected device is indicated on the display for a few seconds.
4. Start playback on the Bluetooth® device.

Note

• You can register up to 8 devices with this unit. If a 9th device is paired, the device that has not been used the longest will be replaced.
• This unit can only be connected to one device at a time.
• When “BLUETOOTH” is selected as the source, this unit will automatically try and connect to the last connected Bluetooth® device.

Models SC-NT10

If this system is connected to a Bluetooth® device, disconnect it.

1. Press the Power button to turn this unit on.
   • The Bluetooth® indicator (blue) blinks slowly.
   • If this unit is being used for the first time (factory preset state): The Bluetooth® indicator blinks fast. The unit will enter pairing standby. go to step 3.
2. Press and hold the [ PAIRING ] button until the Bluetooth® indicator (blue) blinks fast. The unit will enter pairing standby.
3. Select " SC-NT10 " from the Bluetooth® menu of the device.
   • If prompted for the passkey, input “0000”.
   • The device connects with this system automatically after pairing is complete.
   • The name of the connected device is indicated on the display for a few seconds.
4. Start playback on the Bluetooth® device.

Note

• You can register up to 8 devices with this unit. If a 9th device is paired, the device that has not been used the longest will be replaced.
• This unit can only be connected to one device at a time.
• When “BLUETOOTH” is selected as the source, this unit will automatically try and connect to the last connected Bluetooth® device.

Models SC-PM250

Model SC-PM270

If this system is connected to a Bluetooth® device, disconnect it.

To Pair using the remote control

1. Press the Bluetooth® button. If “PAIRING” is indicated on the display, go to step 4.
2. Press the [ PLAY MENU ] button to select " PAIRING ".
3. Press the arrow up ▲ or down ▼ to select " OK? YES " and then press [ OK ]. "PAIRING" is shown.
4. Select the model number of the Panasonic unit, example SC-PM270 , from the Bluetooth® menu of the Bluetooth device.
   • If prompted for the passkey, input “0000”.
   • The device connects with this system automatically after pairing is complete.
   • The name of the connected device is indicated on the display for a few seconds.
5. Start playback on the Bluetooth® device.

To Pair from the main unit

1. Press the Bluetooth® button. If “PAIRING” is indicated on the display, go to step 3.
2. Press and hold the Bluetooth® [ -Pairing ] button on the unit until " PAIRING " appears.
3. Select the model number of the Panasonic unit, example SC-PM270 , from the Bluetooth® menu of the Bluetooth device.
   • If prompted for the passkey, input “0000”.
   • The device connects with this system automatically after pairing is complete.
   • The name of the connected device is indicated on the display for a few seconds.
4. Start playback on the Bluetooth® device.

Note

• You can register up to 8 devices with this unit. If a 9th device is paired, the device that has not been used the longest will be replaced.
• This unit can only be connected to one device at a time.
• When “BLUETOOTH” is selected as the source, this unit will automatically try and connect to the last connected Bluetooth® device.

Model SC-PM600

Model SC-PM700

Model SC-PMX100

If this system is connected to a Bluetooth® device, disconnect it.

To Pair using the remote control

1. Press the Bluetooth® button. If “PAIRING” is indicated on the display, go to step 4.
2. Press the [ PLAY MENU ] button to select " PAIRING ".
3. Press the arrow left ◄ or right ► to select " OK? YES " and then press [ OK ].
4. Select " SC-PMX100 " from the Bluetooth® menu of the device.
   • If prompted for the passkey, input “0000”.
   • The MAC address (alpha-numerical string that is unique to each set) may be displayed this unit is displayed.
   • The device connects with this system automatically after pairing is complete.
   • The name of the connected device is indicated on the display for a few seconds.
5. Start playback on the Bluetooth® device.

To Pair from the main unit

1. Press the Bluetooth® button. If “PAIRING” is indicated on the display, go to step 3.
2. Press and hold the Bluetooth® [ -Pairing ] button on the unit until " PAIRING " appears.
3. Select " SC-PMX100 " from the Bluetooth® menu of the device.
   • If prompted for the passkey, input “0000”.
   • The MAC address (alpha-numerical string that is unique to each set) may be displayed this unit is displayed.
   • The device connects with this system automatically after pairing is complete.
   • The name of the connected device is indicated on the display for a few seconds.
4. Start playback on the Bluetooth® device.

Note

• You can register up to 8 devices with this unit. If a 9th device is paired, the device that has not been used the longest will be replaced.
• This unit can only be connected to one device at a time.
• When “BLUETOOTH” is selected as the source, this unit will automatically try and connect to the last connected Bluetooth® device.

Models SC-PMX150

Model SC-PMX7

If this system is connected to a Bluetooth® device, disconnect it.

1. Press the [ SELECTOR ] button repeatedly to select BLUETOOTH . If “PAIRING” is indicated on the display, go to step 3.
2. Press the [ PLAY MENU ] button to select " New Device " and then press [ OK ]. Pairing is indicated on the display.
3. Select " SC-PMX7 " from the Bluetooth® menu of the device.
   • If prompted for the passkey, input “0000”.
   • The device connects with this system automatically after pairing is complete.
   • The name of the connected device is indicated on the display for a few seconds.
4. Start playback on the Bluetooth® device.

Note

• You can register up to 8 devices with this unit. If a 9th device is paired, the device that has not been used the longest will be replaced.
• This unit can only be connected to one device at a time.
• When “BLUETOOTH” is selected as the source, this unit will automatically try and connect to the last connected Bluetooth® device.

Model SC-PMX70

If this system is connected to a Bluetooth® device, disconnect it.

To Pair using the remote control

1. Press the Bluetooth® button. If “PAIRING” is indicated on the display, go to step 4.
2. Press the [ PLAY MENU ] button to select " PAIRING ".
3. Press the arrow left ◄ or right ► to select " OK? YES " and then press [ OK ].
4. Select " SC-PMX70 " from the Bluetooth® menu of the device.
   • If prompted for the passkey, input “0000”.
   • The device connects with this system automatically after pairing is complete.
   • The name of the connected device is indicated on the display for a few seconds.
5. Start playback on the Bluetooth® device.

To Pair from the main unit

1. Press the Bluetooth® button. If “PAIRING” is indicated on the display, go to step 3.
2. Press and hold the Bluetooth® [ -Pairing ] button on the unit until " PAIRING " appears.
3. Select " SC-PMX70 " from the Bluetooth® menu of the device.
   • If prompted for the passkey, input “0000”.
   • The device connects with this system automatically after pairing is complete.
   • The name of the connected device is indicated on the display for a few seconds.
4. Start playback on the Bluetooth® device.

Note

• You can register up to 8 devices with this unit. If a 9th device is paired, the device that has not been used the longest will be replaced.
• This unit can only be connected to one device at a time.
• When “BLUETOOTH” is selected as the source, this unit will automatically try and connect to the last connected Bluetooth® device.

Model SC-PMX80, SC-PMX800

Model SC-PMX9

If this system is connected to a Bluetooth® device, disconnect it.

1. Press the [ SELECTOR ] button repeatedly to select BLUETOOTH . If “PAIRING” is indicated on the display, go to step 3.
2. Press the [ PLAY MENU ] button to select " New Device " and then press [ OK ]. Pairing is indicated on the display.
3. Select " SC-PMX9 " from the Bluetooth® menu of the device.
   • If prompted for the passkey, input “0000”.
   • The device connects with this system automatically after pairing is complete.
   • The name of the connected device is indicated on the display for a few seconds.
4. Start playback on the Bluetooth® device.

Note

• You can register up to 8 devices with this unit. If a 9th device is paired, the device that has not been used the longest will be replaced.
• This unit can only be connected to one device at a time.
• When “BLUETOOTH” is selected as the source, this unit will automatically try and connect to the last connected Bluetooth® device.

Model SC-PMX90

Model SC-RS50

If this system is connected to a Bluetooth® device, disconnect it.

To Pair using the remote control

1. Press the Bluetooth® [ CD/ ] button repeatedly to select " BLUETOOTH ". If “PAIRING” is indicated on the display, go to step 3.
2. Press the [ PLAY MENU ] button to select " PAIRING " and then press [ OK ].
3. Select " SC-RS50 " from the Bluetooth® menu of the device.
   • If prompted for the passkey, input “0000”.
   • The MAC address (alpha-numerical string that is unique to each set) may be displayed this unit is displayed.
   • The device connects with this system automatically after pairing is complete.
   • The name of the connected device is indicated on the display for a few seconds.
4. Start playback on the Bluetooth® device.

To Pair from the main unit

1. Press and hold [ SELECTOR, - PAIRING] button on the unit until " PAIRING " appears.
2. Select " SC-RS50 " from the Bluetooth® menu of the device.
   • If prompted for the passkey, input “0000”.
   • The MAC address (alpha-numerical string that is unique to each set) may be displayed this unit is displayed.
   • The device connects with this system automatically after pairing is complete.
   • The name of the connected device is indicated on the display for a few seconds.
3. Start playback on the Bluetooth® device.

Note

• You can register up to 8 devices with this unit. If a 9th device is paired, the device that has not been used the longest will be replaced.
• This unit can only be connected to one device at a time.
• When “BLUETOOTH” is selected as the source, this unit will automatically try and connect to the last connected Bluetooth® device. (“LINKING” is shown during this process.)

Model SC-UA3, SC-UA7

Model SC-UX100